8288048: Build failure with GCC 6 after JDK-8286562

Reviewed-by: kbarrett, ysuenaga

.github/actions/config/action.yml

@@ -1,46 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Config'
-description: 'Read JDK Configuration Variables'
-inputs:
-  var:
-    description: 'The name of the variable to read'
-    required: true
-outputs:
-  value:
-    description: 'The value of the configuration variable'
-    value: ${{ steps.read-config.outputs.value }}
-
-runs:
-  using: composite
-  steps:
-    - name: 'Read configuration variable from repo'
-      id: read-config
-      run: |
-        # Extract value from configuration file
-        value="$(grep -h ${{ inputs.var }}= make/conf/github-actions.conf | cut -d '=' -f 2-)"
-        echo "value=$value" >> $GITHUB_OUTPUT
-      shell: bash

.github/actions/do-build/action.yml

@@ -1,80 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Do build'
-description: 'Build the JDK using make'
-inputs:
-  make-target:
-    description: 'Make target(s)'
-    required: true
-  platform:
-    description: 'Platform name'
-    required: true
-  debug-suffix:
-    description: 'File name suffix denoting debug level, possibly empty'
-    required: false
-
-runs:
-  using: composite
-  steps:
-    - name: 'Build'
-      id: build
-      run: >
-        make LOG=info ${{ inputs.make-target }}
-        || bash ./.github/scripts/gen-build-failure-report.sh "$GITHUB_STEP_SUMMARY"
-      shell: bash
-
-    - name: 'Check for failure'
-      id: check
-      run: |
-        # Check for failure marker file
-        build_dir="$(ls -d build/*)"
-        if [[ -e $build_dir/build-failure ]]; then
-          # Collect relevant log files
-          mkdir failure-logs
-          cp \
-              $build_dir/spec.gmk \
-              $build_dir/build.log \
-              $build_dir/configure.log \
-              $build_dir/make-support/failure-summary.log \
-              $build_dir/make-support/failure-logs/* \
-              failure-logs/ 2> /dev/null || true
-          echo 'failure=true' >> $GITHUB_OUTPUT
-        fi
-      shell: bash
-
-    - name: 'Upload build logs'
-      uses: actions/upload-artifact@v3
-      with:
-        name: failure-logs-${{ inputs.platform }}${{ inputs.debug-suffix }}
-        path: failure-logs
-      if: steps.check.outputs.failure == 'true'
-
-      # This is the best way I found to abort the job with an error message
-    - name: 'Notify about build failures'
-      uses: actions/github-script@v6
-      with:
-        script: core.setFailed('Build failed. See summary for details.')
-      if: steps.check.outputs.failure == 'true'

.github/actions/get-bootjdk/action.yml

@@ -1,109 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Get BootJDK'
-description: 'Download the BootJDK from cache or source location'
-inputs:
-  platform:
-    description: 'Platform'
-    required: true
-outputs:
-  path:
-    description: 'Path to the installed BootJDK'
-    value: ${{ steps.path-name.outputs.path }}
-
-runs:
-  using: composite
-  steps:
-    - name: 'Determine platform prefix'
-      id: platform-prefix
-      run: |
-        # Convert platform name to upper case
-        platform_prefix="$(echo ${{ inputs.platform }} | tr [a-z-] [A-Z_])"
-        echo "value=$platform_prefix" >> $GITHUB_OUTPUT
-      shell: bash
-
-    - name: 'Get URL configuration'
-      id: url
-      uses: ./.github/actions/config
-      with:
-        var: ${{ steps.platform-prefix.outputs.value}}_BOOT_JDK_URL
-
-    - name: 'Get SHA256 configuration'
-      id: sha256
-      uses: ./.github/actions/config
-      with:
-        var: ${{ steps.platform-prefix.outputs.value}}_BOOT_JDK_SHA256
-
-    - name: 'Get file extension configuration'
-      id: ext
-      uses: ./.github/actions/config
-      with:
-        var: ${{ steps.platform-prefix.outputs.value}}_BOOT_JDK_EXT
-
-    - name: 'Check cache for BootJDK'
-      id: get-cached-bootjdk
-      uses: actions/cache@v3
-      with:
-        path: bootjdk/jdk
-        key: boot-jdk-${{ inputs.platform }}-${{ steps.sha256.outputs.value }}
-
-      # macOS is missing sha256sum
-    - name: 'Install sha256sum'
-      run: |
-        # Run Homebrew installation
-        brew install coreutils
-      shell: bash
-      if: steps.get-cached-bootjdk.outputs.cache-hit != 'true' && runner.os == 'macOS'
-
-    - name: 'Download BootJDK'
-      run: |
-        # Download BootJDK and verify checksum
-        mkdir -p bootjdk/jdk
-        mkdir -p bootjdk/unpacked
-        wget --progress=dot:mega -O bootjdk/jdk.${{ steps.ext.outputs.value }} '${{ steps.url.outputs.value }}'
-        echo '${{ steps.sha256.outputs.value }} bootjdk/jdk.${{ steps.ext.outputs.value }}' | sha256sum -c >/dev/null -
-      shell: bash
-      if: steps.get-cached-bootjdk.outputs.cache-hit != 'true'
-
-    - name: 'Unpack BootJDK'
-      run: |
-        # Unpack the BootJDK and move files to a common location
-        if [[ '${{ steps.ext.outputs.value }}' == 'tar.gz' ]]; then
-          tar -xf bootjdk/jdk.${{ steps.ext.outputs.value }} -C bootjdk/unpacked
-        else
-          unzip -q bootjdk/jdk.${{ steps.ext.outputs.value }} -d bootjdk/unpacked
-        fi
-        jdk_root="$(dirname $(find bootjdk/unpacked -name bin -type d))"
-        mv "$jdk_root"/* bootjdk/jdk/
-      shell: bash
-      if: steps.get-cached-bootjdk.outputs.cache-hit != 'true'
-
-    - name: 'Export path to where BootJDK is installed'
-      id: path-name
-      run: |
-        # Export the path
-        echo 'path=bootjdk/jdk' >> $GITHUB_OUTPUT
-      shell: bash

.github/actions/get-bundles/action.yml

@@ -1,109 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Get bundles'
-description: 'Download resulting JDK bundles'
-inputs:
-  platform:
-    description: 'Platform name'
-    required: true
-  debug-suffix:
-    description: 'File name suffix denoting debug level, possibly empty'
-    required: false
-outputs:
-  jdk-path:
-    description: 'Path to the installed JDK bundle'
-    value: ${{ steps.path-name.outputs.jdk }}
-  symbols-path:
-    description: 'Path to the installed symbols bundle'
-    value: ${{ steps.path-name.outputs.symbols }}
-  tests-path:
-    description: 'Path to the installed tests bundle'
-    value: ${{ steps.path-name.outputs.tests }}
-
-runs:
-  using: composite
-  steps:
-    - name: 'Download bundles artifact'
-      id: download-bundles
-      uses: actions/download-artifact@v3
-      with:
-        name: bundles-${{ inputs.platform }}${{ inputs.debug-suffix }}
-        path: bundles
-      continue-on-error: true
-
-    - name: 'Download bundles artifact (retry)'
-      uses: actions/download-artifact@v3
-      with:
-        name: bundles-${{ inputs.platform }}${{ inputs.debug-suffix }}
-        path: bundles
-      if: steps.download-bundles.outcome == 'failure'
-
-    - name: 'Unpack bundles'
-      run: |
-        if [[ -e bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.zip ]]; then
-          echo 'Unpacking jdk bundle...'
-          mkdir -p bundles/jdk
-          unzip -q bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.zip -d bundles/jdk
-        fi
-
-        if [[ -e bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz ]]; then
-          echo 'Unpacking jdk bundle...'
-          mkdir -p bundles/jdk
-          tar -xf bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz -C bundles/jdk
-        fi
-
-        if [[ -e bundles/symbols-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz ]]; then
-          echo 'Unpacking symbols bundle...'
-          mkdir -p bundles/symbols
-          tar -xf bundles/symbols-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz -C bundles/symbols
-        fi
-
-        if [[ -e bundles/tests-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz ]]; then
-          echo 'Unpacking tests bundle...'
-          mkdir -p bundles/tests
-          tar -xf bundles/tests-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz -C bundles/tests
-        fi
-      shell: bash
-
-    - name: 'Export paths to where bundles are installed'
-      id: path-name
-      run: |
-        # Export the paths
-
-        jdk_dir="$GITHUB_WORKSPACE/$(dirname $(find bundles/jdk -name bin -type d))"
-        symbols_dir="$GITHUB_WORKSPACE/$(dirname $(find bundles/symbols -name bin -type d))"
-        tests_dir="$GITHUB_WORKSPACE/bundles/tests"
-
-        if [[ '${{ runner.os }}' == 'Windows' ]]; then
-          jdk_dir="$(cygpath $jdk_dir)"
-          symbols_dir="$(cygpath $symbols_dir)"
-          tests_dir="$(cygpath $tests_dir)"
-        fi
-
-        echo "jdk=$jdk_dir" >> $GITHUB_OUTPUT
-        echo "symbols=$symbols_dir" >> $GITHUB_OUTPUT
-        echo "tests=$tests_dir" >> $GITHUB_OUTPUT
-      shell: bash

.github/actions/get-gtest/action.yml

@@ -1,54 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Get GTest'
-description: 'Download GTest source'
-outputs:
-  path:
-    description: 'Path to the installed GTest'
-    value: ${{ steps.path-name.outputs.path }}
-
-runs:
-  using: composite
-  steps:
-    - name: 'Get GTest version configuration'
-      id: version
-      uses: ./.github/actions/config
-      with:
-        var: GTEST_VERSION
-
-    - name: 'Checkout GTest source'
-      uses: actions/checkout@v3
-      with:
-        repository: google/googletest
-        ref: 'release-${{ steps.version.outputs.value }}'
-        path: gtest
-
-    - name: 'Export path to where GTest is installed'
-      id: path-name
-      run: |
-        # Export the path
-        echo 'path=gtest' >> $GITHUB_OUTPUT
-      shell: bash

.github/actions/get-jtreg/action.yml

@@ -1,72 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Get JTReg'
-description: 'Download JTReg from cache or source location'
-outputs:
-  path:
-    description: 'Path to the installed JTReg'
-    value: ${{ steps.path-name.outputs.path }}
-
-runs:
-  using: composite
-  steps:
-    - name: 'Get JTReg version configuration'
-      id: version
-      uses: ./.github/actions/config
-      with:
-        var: JTREG_VERSION
-
-    - name: 'Check cache for JTReg'
-      id: get-cached-jtreg
-      uses: actions/cache@v3
-      with:
-        path: jtreg/installed
-        key: jtreg-${{ steps.version.outputs.value }}
-
-    - name: 'Checkout the JTReg source'
-      uses: actions/checkout@v3
-      with:
-        repository: openjdk/jtreg
-        ref: jtreg-${{ steps.version.outputs.value }}
-        path: jtreg/src
-      if: steps.get-cached-jtreg.outputs.cache-hit != 'true'
-
-    - name: 'Build JTReg'
-      run: |
-        # Build JTReg and move files to the proper locations
-        bash make/build.sh --jdk "$JAVA_HOME_11_X64"
-        mkdir ../installed
-        mv build/images/jtreg/* ../installed
-      working-directory: jtreg/src
-      shell: bash
-      if: steps.get-cached-jtreg.outputs.cache-hit != 'true'
-
-    - name: 'Export path to where JTReg is installed'
-      id: path-name
-      run: |
-        # Export the path
-        echo 'path=jtreg/installed' >> $GITHUB_OUTPUT
-      shell: bash

.github/actions/get-msys2/action.yml

@@ -1,44 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Get MSYS2'
-description: 'Download MSYS2 and prepare a Windows host'
-
-runs:
-  using: composite
-  steps:
-    - name: 'Install MSYS2'
-      uses: msys2/setup-msys2@v2
-      with:
-        install: 'autoconf tar unzip zip make'
-        path-type: minimal
-        location: msys2
-
-      # We can't run bash until this is completed, so stick with pwsh
-    - name: 'Set MSYS2 path'
-      run: |
-        # Prepend msys2/msys64/usr/bin to the PATH
-        echo "$env:GITHUB_WORKSPACE/msys2/msys64/usr/bin" >> $env:GITHUB_PATH
-      shell: pwsh

.github/actions/upload-bundles/action.yml

@@ -1,77 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Upload bundles'
-description: 'Upload resulting JDK bundles'
-inputs:
-  platform:
-    description: 'Platform name'
-    required: true
-  debug-suffix:
-    description: 'File name suffix denoting debug level, possibly empty'
-    required: false
-
-runs:
-  using: composite
-  steps:
-
-    - name: 'Determine bundle names'
-      id: bundles
-      run: |
-        # Rename bundles to consistent names
-        jdk_bundle_zip="$(ls build/*/bundles/jdk-*_bin${{ inputs.debug-suffix }}.zip 2> /dev/null || true)"
-        jdk_bundle_tar_gz="$(ls build/*/bundles/jdk-*_bin${{ inputs.debug-suffix }}.tar.gz 2> /dev/null || true)"
-        symbols_bundle="$(ls build/*/bundles/jdk-*_bin${{ inputs.debug-suffix }}-symbols.tar.gz 2> /dev/null || true)"
-        tests_bundle="$(ls build/*/bundles/jdk-*_bin-tests${{ inputs.debug-suffix }}.tar.gz 2> /dev/null || true)"
-
-        mkdir bundles
-
-        if [[ "$jdk_bundle_zip" != "" ]]; then
-          mv "$jdk_bundle_zip" "bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.zip"
-        fi
-        if [[ "$jdk_bundle_tar_gz" != "" ]]; then
-          mv "$jdk_bundle_tar_gz" "bundles/jdk-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz"
-        fi
-        if [[ "$symbols_bundle" != "" ]]; then
-          mv "$symbols_bundle" "bundles/symbols-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz"
-        fi
-        if [[ "$tests_bundle" != "" ]]; then
-          mv "$tests_bundle" "bundles/tests-${{ inputs.platform }}${{ inputs.debug-suffix }}.tar.gz"
-        fi
-
-        if [[ "$jdk_bundle_zip$jdk_bundle_tar_gz$symbols_bundle$tests_bundle" != "" ]]; then
-          echo 'bundles-found=true' >> $GITHUB_OUTPUT
-        else
-          echo 'bundles-found=false' >> $GITHUB_OUTPUT
-        fi
-      shell: bash
-
-    - name: 'Upload bundles artifact'
-      uses: actions/upload-artifact@v3
-      with:
-        name: bundles-${{ inputs.platform }}${{ inputs.debug-suffix }}
-        path: bundles
-        retention-days: 1
-      if: steps.bundles.outputs.bundles-found == 'true'

.github/scripts/gen-build-failure-report.sh

@@ -1,51 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-GITHUB_STEP_SUMMARY="$1"
-BUILD_DIR="$(ls -d build/*)"
-
-# Send signal to the do-build action that we failed
-touch "$BUILD_DIR/build-failure"
-
-(
-  echo '### :boom: Build failure summary'
-  echo ''
-  echo 'The build failed. Here follows the failure summary from the build.'
-  echo '<details><summary><b>View build failure summary</b></summary>'
-  echo ''
-  echo '```'
-  if [[ -f "$BUILD_DIR/make-support/failure-summary.log" ]]; then
-    cat "$BUILD_DIR/make-support/failure-summary.log"
-  else
-    echo "Failure summary ($BUILD_DIR/make-support/failure-summary.log) not found"
-  fi
-  echo '```'
-  echo '</details>'
-  echo ''
-
-  echo ''
-  echo ':arrow_right: To see the entire test log, click the job in the list to the left. To download logs, see the `failure-logs` [artifact above](#artifacts).'
-) >> $GITHUB_STEP_SUMMARY

.github/scripts/gen-test-results.sh

@@ -1,92 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-GITHUB_STEP_SUMMARY="$1"
-
-test_suite_name=$(cat build/run-test-prebuilt/test-support/test-last-ids.txt)
-results_dir=build/run-test-prebuilt/test-results/$test_suite_name/text
-report_dir=build/run-test-prebuilt/test-support/$test_suite_name
-
-failures=$(sed -E -e 's/(.*)\.(java|sh)/\1/' -e '/^#/d' $results_dir/newfailures.txt 2> /dev/null || true)
-errors=$(sed -E -e 's/(.*)\.(java|sh)/\1/' -e '/^#/d' $results_dir/other_errors.txt 2> /dev/null || true)
-
-if [[ "$failures" = "" && "$errors" = "" ]]; then
-  # If we have nothing to report, exit this step now
-  exit 0
-fi
-
-echo "### Test output for failed tests" >> $GITHUB_STEP_SUMMARY
-for test in $failures $errors; do
-  anchor="$(echo "$test" | tr [A-Z/] [a-z_])"
-  base_path="$(echo "$test" | tr '#' '_')"
-  report_file="$report_dir/$base_path.jtr"
-  hs_err_files=$(ls $report_dir/$base_path/hs_err*.log 2> /dev/null || true)
-  echo "####  <a id="$anchor">$test"
-
-  echo '<details><summary>View test results</summary>'
-  echo ''
-  echo '```'
-  if [[ -f "$report_file" ]]; then
-    cat "$report_file"
-  else
-    echo "Error: Result file $report_file not found"
-  fi
-  echo '```'
-  echo '</details>'
-  echo ''
-
-  if [[ "$hs_err_files" != "" ]]; then
-    echo '<details><summary>View HotSpot error log</summary>'
-    echo ''
-    for hs_err in $hs_err_files; do
-      echo '```'
-      echo "$hs_err:"
-      echo ''
-      cat "$hs_err"
-      echo '```'
-    done
-
-    echo '</details>'
-    echo ''
-  fi
-
-done >> $GITHUB_STEP_SUMMARY
-
-# With many failures, the summary can easily exceed 1024 kB, the limit set by Github
-# Trim it down if so.
-summary_size=$(wc -c < $GITHUB_STEP_SUMMARY)
-if [[ $summary_size -gt 1000000 ]]; then
-  # Trim to below 1024 kB, and cut off after the last detail group
-  head -c 1000000 $GITHUB_STEP_SUMMARY | tac | sed -n -e '/<\/details>/,$ p' | tac > $GITHUB_STEP_SUMMARY.tmp
-  mv $GITHUB_STEP_SUMMARY.tmp $GITHUB_STEP_SUMMARY
-  (
-    echo ''
-    echo ':x: **WARNING: Summary is too large and has been truncated.**'
-    echo ''
-  )  >> $GITHUB_STEP_SUMMARY
-fi
-
-echo ':arrow_right: To see the entire test log, click the job in the list to the left.'  >> $GITHUB_STEP_SUMMARY

.github/scripts/gen-test-summary.sh

@@ -1,70 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-GITHUB_STEP_SUMMARY="$1"
-GITHUB_OUTPUT="$2"
-
-test_suite_name=$(cat build/run-test-prebuilt/test-support/test-last-ids.txt)
-results_dir=build/run-test-prebuilt/test-results/$test_suite_name/text
-
-if [[ ! -f build/run-test-prebuilt/make-support/exit-with-error ]]; then
-  # There were no failures, exit now
-  exit
-fi
-
-failures=$(sed -E -e 's/(.*)\.(java|sh)/\1/' -e '/^#/d' $results_dir/newfailures.txt 2> /dev/null || true)
-errors=$(sed -E -e 's/(.*)\.(java|sh)/\1/' -e '/^#/d' $results_dir/other_errors.txt 2> /dev/null || true)
-failure_count=$(echo $failures | wc -w || true)
-error_count=$(echo $errors | wc -w || true)
-
-if [[ "$failures" = "" && "$errors" = "" ]]; then
-  # We know something went wrong, but not what
-  echo 'error-message=Unspecified test suite failure. Please see log for job for details.' >> $GITHUB_OUTPUT
-  exit 0
-fi
-
-echo 'failure=true' >> $GITHUB_OUTPUT
-echo "error-message=Test run reported $failure_count test failure(s) and $error_count error(s). See summary for details." >> $GITHUB_OUTPUT
-
-echo '### :boom: Test failures summary' >> $GITHUB_STEP_SUMMARY
-
-if [[ "$failures" != "" ]]; then
-  echo '' >> $GITHUB_STEP_SUMMARY
-  echo 'These tests reported failure:' >> $GITHUB_STEP_SUMMARY
-  for test in $failures; do
-    anchor="$(echo "$test" | tr [A-Z/] [a-z_])"
-    echo "* [$test](#user-content-$anchor)"
-  done >> $GITHUB_STEP_SUMMARY
-fi
-
-if [[ "$errors" != "" ]]; then
-  echo '' >> $GITHUB_STEP_SUMMARY
-  echo 'These tests reported errors:'  >> $GITHUB_STEP_SUMMARY
-  for test in $errors; do
-    anchor="$(echo "$test" | tr [A-Z/] [a-z_])"
-    echo "* [$test](#user-content-$anchor)"
-  done >> $GITHUB_STEP_SUMMARY
-fi

.github/workflows/build-cross-compile.yml

@@ -1,154 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Build (cross-compile)'
-
-on:
-  workflow_call:
-    inputs:
-      gcc-major-version:
-        required: false
-        type: string
-        default: '10'
-      apt-gcc-version:
-        required: false
-        type: string
-        default: '10.3.0-1ubuntu1~20.04'
-      apt-gcc-cross-suffix:
-        required: false
-        type: string
-        default: 'cross1'
-
-jobs:
-  build-cross-compile:
-    name: build
-    runs-on: ubuntu-20.04
-
-    strategy:
-      fail-fast: false
-      matrix:
-        target-cpu:
-          - aarch64
-          - arm
-          - s390x
-          - ppc64le
-        include:
-          - target-cpu: aarch64
-            debian-arch: arm64
-            gnu-arch: aarch64
-          - target-cpu: arm
-            debian-arch: armhf
-            gnu-arch: arm
-            gnu-abi: eabihf
-          - target-cpu: s390x
-            debian-arch: s390x
-            gnu-arch: s390x
-          - target-cpu: ppc64le
-            debian-arch: ppc64el
-            gnu-arch: powerpc64le
-
-    steps:
-      - name: 'Checkout the JDK source'
-        uses: actions/checkout@v3
-
-      - name: 'Get the BootJDK'
-        id: bootjdk
-        uses: ./.github/actions/get-bootjdk
-        with:
-          platform: linux-x64
-
-        # Use linux-x64 JDK bundle as build JDK
-      - name: 'Get build JDK'
-        id: buildjdk
-        uses: ./.github/actions/get-bundles
-        with:
-          platform: linux-x64
-
-        # Upgrading apt to solve libc6 installation bugs, see JDK-8260460.
-      - name: 'Install toolchain and dependencies'
-        run: |
-          # Install dependencies using apt-get
-          sudo apt-get update
-          sudo apt-get install --only-upgrade apt
-          sudo apt-get install \
-              gcc-${{ inputs.gcc-major-version }}=${{ inputs.apt-gcc-version }} \
-              g++-${{ inputs.gcc-major-version }}=${{ inputs.apt-gcc-version }} \
-              gcc-${{ inputs.gcc-major-version }}-${{ matrix.gnu-arch }}-linux-gnu${{ matrix.gnu-abi}}=${{ inputs.apt-gcc-version }}${{ inputs.apt-gcc-cross-suffix }} \
-              g++-${{ inputs.gcc-major-version }}-${{ matrix.gnu-arch }}-linux-gnu${{ matrix.gnu-abi}}=${{ inputs.apt-gcc-version }}${{ inputs.apt-gcc-cross-suffix }} \
-              libxrandr-dev libxtst-dev libcups2-dev libasound2-dev
-          sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-${{ inputs.gcc-major-version }} 100 --slave /usr/bin/g++ g++ /usr/bin/g++-${{ inputs.gcc-major-version }}
-
-      - name: 'Check cache for sysroot'
-        id: get-cached-sysroot
-        uses: actions/cache@v3
-        with:
-          path: sysroot
-          key: sysroot-${{ matrix.debian-arch }}-${{ hashFiles('./.github/workflows/build-cross-compile.yml') }}
-
-      - name: 'Install sysroot dependencies'
-        run: sudo apt-get install debootstrap qemu-user-static
-        if: steps.get-cached-sysroot.outputs.cache-hit != 'true'
-
-      - name: 'Create sysroot'
-        run: >
-          sudo qemu-debootstrap
-          --arch=${{ matrix.debian-arch }}
-          --verbose
-          --include=fakeroot,symlinks,build-essential,libx11-dev,libxext-dev,libxrender-dev,libxrandr-dev,libxtst-dev,libxt-dev,libcups2-dev,libfontconfig1-dev,libasound2-dev,libfreetype6-dev,libpng-dev
-          --resolve-deps
-          buster
-          sysroot
-          https://httpredir.debian.org/debian/
-        if: steps.get-cached-sysroot.outputs.cache-hit != 'true'
-
-      - name: 'Prepare sysroot'
-        run: |
-          # Prepare sysroot and remove unused files to minimize cache
-          sudo chroot sysroot symlinks -cr .
-          sudo chown ${USER} -R sysroot
-          rm -rf sysroot/{dev,proc,run,sys}
-        if: steps.get-cached-sysroot.outputs.cache-hit != 'true'
-
-      - name: 'Configure'
-        run: >
-          bash configure
-          --with-conf-name=linux-${{ matrix.target-cpu }}
-          --with-version-opt=${GITHUB_ACTOR}-${GITHUB_SHA}
-          --with-boot-jdk=${{ steps.bootjdk.outputs.path }}
-          --with-zlib=system
-          --enable-debug
-          --disable-precompiled-headers
-          --openjdk-target=${{ matrix.gnu-arch }}-linux-gnu${{ matrix.gnu-abi}}
-          --with-sysroot=sysroot
-          --with-build-jdk=${{ steps.buildjdk.outputs.jdk-path }}
-          CC=${{ matrix.gnu-arch }}-linux-gnu${{ matrix.gnu-abi}}-gcc-10
-          CXX=${{ matrix.gnu-arch }}-linux-gnu${{ matrix.gnu-abi}}-g++-10
-
-      - name: 'Build'
-        id: build
-        uses: ./.github/actions/do-build
-        with:
-          make-target: 'hotspot'
-          platform: linux-${{ matrix.target-cpu }}

.github/workflows/build-linux.yml

@@ -1,132 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Build (linux)'
-
-on:
-  workflow_call:
-    inputs:
-      platform:
-        required: true
-        type: string
-      extra-conf-options:
-        required: false
-        type: string
-      make-target:
-        required: false
-        type: string
-        default: 'product-bundles test-bundles'
-      debug-levels:
-        required: false
-        type: string
-        default: '[ "debug", "release" ]'
-      apt-gcc-version:
-        required: true
-        type: string
-      apt-architecture:
-        required: false
-        type: string
-      apt-extra-packages:
-        required: false
-        type: string
-
-jobs:
-  build-linux:
-    name: build
-    runs-on: ubuntu-20.04
-
-    strategy:
-      fail-fast: false
-      matrix:
-        debug-level: ${{ fromJSON(inputs.debug-levels) }}
-        include:
-          - debug-level: debug
-            flags: --with-debug-level=fastdebug
-            suffix: -debug
-
-    steps:
-      - name: 'Checkout the JDK source'
-        uses: actions/checkout@v3
-
-      - name: 'Get the BootJDK'
-        id: bootjdk
-        uses: ./.github/actions/get-bootjdk
-        with:
-          platform: linux-x64
-
-      - name: 'Get JTReg'
-        id: jtreg
-        uses: ./.github/actions/get-jtreg
-
-      - name: 'Get GTest'
-        id: gtest
-        uses: ./.github/actions/get-gtest
-
-      - name: 'Set architecture'
-        id: arch
-        run: |
-          # Set a proper suffix for packages if using a different architecture
-          if [[ '${{ inputs.apt-architecture }}' != '' ]]; then
-            echo 'suffix=:${{ inputs.apt-architecture }}' >> $GITHUB_OUTPUT
-          fi
-
-      # Upgrading apt to solve libc6 installation bugs, see JDK-8260460.
-      - name: 'Install toolchain and dependencies'
-        run: |
-          # Install dependencies using apt-get
-          if [[ '${{ inputs.apt-architecture }}' != '' ]]; then
-            sudo dpkg --add-architecture ${{ inputs.apt-architecture }}
-          fi
-          sudo apt-get update
-          sudo apt-get install --only-upgrade apt
-          sudo apt-get install gcc-${{ inputs.apt-gcc-version }} g++-${{ inputs.apt-gcc-version }} libxrandr-dev${{ steps.arch.outputs.suffix }} libxtst-dev${{ steps.arch.outputs.suffix }} libcups2-dev${{ steps.arch.outputs.suffix }} libasound2-dev${{ steps.arch.outputs.suffix }} ${{ inputs.apt-extra-packages }}
-          sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-10 100 --slave /usr/bin/g++ g++ /usr/bin/g++-10
-
-      - name: 'Configure'
-        run: >
-          bash configure
-          --with-conf-name=${{ inputs.platform }}
-          ${{ matrix.flags }}
-          --with-version-opt=${GITHUB_ACTOR}-${GITHUB_SHA}
-          --with-boot-jdk=${{ steps.bootjdk.outputs.path }}
-          --with-jtreg=${{ steps.jtreg.outputs.path }}
-          --with-gtest=${{ steps.gtest.outputs.path }}
-          --enable-jtreg-failure-handler
-          --with-zlib=system
-          ${{ inputs.extra-conf-options }}
-
-      - name: 'Build'
-        id: build
-        uses: ./.github/actions/do-build
-        with:
-          make-target: '${{ inputs.make-target }}'
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'
-
-      - name: 'Upload bundles'
-        uses: ./.github/actions/upload-bundles
-        with:
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'

.github/workflows/build-macos.yml

@@ -1,114 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Build (macos)'
-
-on:
-  workflow_call:
-    inputs:
-      platform:
-        required: true
-        type: string
-      extra-conf-options:
-        required: false
-        type: string
-      make-target:
-        required: false
-        type: string
-        default: 'product-bundles test-bundles'
-      debug-levels:
-        required: false
-        type: string
-        default: '[ "debug", "release" ]'
-      xcode-toolset-version:
-        required: true
-        type: string
-
-jobs:
-  build-macos:
-    name: build
-    runs-on: macos-11
-
-    strategy:
-      fail-fast: false
-      matrix:
-        debug-level: ${{ fromJSON(inputs.debug-levels) }}
-        include:
-          - debug-level: debug
-            flags: --with-debug-level=fastdebug
-            suffix: -debug
-
-    steps:
-      - name: 'Checkout the JDK source'
-        uses: actions/checkout@v3
-
-      - name: 'Get the BootJDK'
-        id: bootjdk
-        uses: ./.github/actions/get-bootjdk
-        with:
-          platform: macos-x64
-
-      - name: 'Get JTReg'
-        id: jtreg
-        uses: ./.github/actions/get-jtreg
-
-      - name: 'Get GTest'
-        id: gtest
-        uses: ./.github/actions/get-gtest
-
-      - name: 'Install toolchain and dependencies'
-        run: |
-          # Run Homebrew installation and xcode-select
-          brew install make
-          sudo xcode-select --switch /Applications/Xcode_${{ inputs.xcode-toolset-version }}.app/Contents/Developer
-          # This will make GNU make available as 'make' and not only as 'gmake'
-          echo '/usr/local/opt/make/libexec/gnubin' >> $GITHUB_PATH
-
-      - name: 'Configure'
-        run: >
-          bash configure
-          --with-conf-name=${{ inputs.platform }}
-          ${{ matrix.flags }}
-          --with-version-opt=${GITHUB_ACTOR}-${GITHUB_SHA}
-          --with-boot-jdk=${{ steps.bootjdk.outputs.path }}
-          --with-jtreg=${{ steps.jtreg.outputs.path }}
-          --with-gtest=${{ steps.gtest.outputs.path }}
-          --enable-jtreg-failure-handler
-          --with-zlib=system
-          ${{ inputs.extra-conf-options }}
-
-      - name: 'Build'
-        id: build
-        uses: ./.github/actions/do-build
-        with:
-          make-target: '${{ inputs.make-target }}'
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'
-
-      - name: 'Upload bundles'
-        uses: ./.github/actions/upload-bundles
-        with:
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'

.github/workflows/build-windows.yml

@@ -1,145 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Build (windows)'
-
-on:
-  workflow_call:
-    inputs:
-      platform:
-        required: true
-        type: string
-      extra-conf-options:
-        required: false
-        type: string
-      make-target:
-        required: false
-        type: string
-        default: 'product-bundles test-bundles'
-      debug-levels:
-        required: false
-        type: string
-        default: '[ "debug", "release" ]'
-      msvc-toolset-version:
-        required: true
-        type: string
-      msvc-toolset-architecture:
-        required: true
-        type: string
-
-env:
-  # These are needed to make the MSYS2 bash work properly
-  MSYS2_PATH_TYPE: minimal
-  CHERE_INVOKING: 1
-
-jobs:
-  build-windows:
-    name: build
-    runs-on: windows-2019
-    defaults:
-      run:
-        shell: bash
-
-    strategy:
-      fail-fast: false
-      matrix:
-        debug-level: ${{ fromJSON(inputs.debug-levels) }}
-        include:
-          - debug-level: debug
-            flags: --with-debug-level=fastdebug
-            suffix: -debug
-
-    steps:
-      - name: 'Checkout the JDK source'
-        uses: actions/checkout@v3
-
-      - name: 'Get MSYS2'
-        uses: ./.github/actions/get-msys2
-
-      - name: 'Get the BootJDK'
-        id: bootjdk
-        uses: ./.github/actions/get-bootjdk
-        with:
-          platform: windows-x64
-
-      - name: 'Get JTReg'
-        id: jtreg
-        uses: ./.github/actions/get-jtreg
-
-      - name: 'Get GTest'
-        id: gtest
-        uses: ./.github/actions/get-gtest
-
-      - name: 'Check toolchain installed'
-        id: toolchain-check
-        run: |
-          set +e
-          '/c/Program Files (x86)/Microsoft Visual Studio/2019/Enterprise/vc/auxiliary/build/vcvars64.bat' -vcvars_ver=${{ inputs.msvc-toolset-version }}
-          if [ $? -eq 0 ]; then
-            echo "Toolchain is already installed"
-            echo "toolchain-installed=true" >> $GITHUB_OUTPUT
-          else
-            echo "Toolchain is not yet installed"
-            echo "toolchain-installed=false" >> $GITHUB_OUTPUT
-          fi
-
-      - name: 'Install toolchain and dependencies'
-        run: |
-          # Run Visual Studio Installer
-          '/c/Program Files (x86)/Microsoft Visual Studio/Installer/vs_installer.exe' \
-            modify --quiet --installPath 'C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise' \
-            --add Microsoft.VisualStudio.Component.VC.${{ inputs.msvc-toolset-version }}.${{ inputs.msvc-toolset-architecture }}
-        if: steps.toolchain-check.outputs.toolchain-installed != 'true'
-
-      - name: 'Configure'
-        run: >
-          bash configure
-          --with-conf-name=${{ inputs.platform }}
-          ${{ matrix.flags }}
-          --with-version-opt=${GITHUB_ACTOR}-${GITHUB_SHA}
-          --with-boot-jdk=${{ steps.bootjdk.outputs.path }}
-          --with-jtreg=${{ steps.jtreg.outputs.path }}
-          --with-gtest=${{ steps.gtest.outputs.path }}
-          --enable-jtreg-failure-handler
-          --with-msvc-toolset-version=${{ inputs.msvc-toolset-version }}
-          ${{ inputs.extra-conf-options }}
-        env:
-          # We need a minimal PATH on Windows
-          # Set PATH to "", so just GITHUB_PATH is included
-          PATH: ''
-
-      - name: 'Build'
-        id: build
-        uses: ./.github/actions/do-build
-        with:
-          make-target: '${{ inputs.make-target }}'
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'
-
-      - name: 'Upload bundles'
-        uses: ./.github/actions/upload-bundles
-        with:
-          platform: ${{ inputs.platform }}
-          debug-suffix: '${{ matrix.suffix }}'

.github/workflows/main.yml

@@ -1,331 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'OpenJDK GHA Sanity Checks'
-
-on:
-  push:
-    branches-ignore:
-      - master
-      - pr/*
-  workflow_dispatch:
-    inputs:
-      platforms:
-        description: 'Platform(s) to execute on (comma separated, e.g. "linux-x64, macos, aarch64")'
-        required: true
-        default: 'linux-x64, linux-x86, linux-x64-variants, linux-cross-compile, macos-x64, macos-aarch64, windows-x64, windows-aarch64'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-
-  ###
-  ### Determine platforms to include
-  ###
-
-  select:
-    name: 'Select platforms'
-    runs-on: ubuntu-20.04
-    outputs:
-      linux-x64: ${{ steps.include.outputs.linux-x64 }}
-      linux-x86: ${{ steps.include.outputs.linux-x86 }}
-      linux-x64-variants: ${{ steps.include.outputs.linux-x64-variants }}
-      linux-cross-compile: ${{ steps.include.outputs.linux-cross-compile }}
-      macos-x64: ${{ steps.include.outputs.macos-x64 }}
-      macos-aarch64: ${{ steps.include.outputs.macos-aarch64 }}
-      windows-x64: ${{ steps.include.outputs.windows-x64 }}
-      windows-aarch64: ${{ steps.include.outputs.windows-aarch64 }}
-
-    steps:
-        # This function must be inlined in main.yml, or we'd be forced to checkout the repo
-      - name: 'Check what jobs to run'
-        id: include
-        run: |
-          # Determine which platform jobs to run
-
-          # Returns 'true' if the input platform list matches any of the platform monikers given as argument,
-          # 'false' otherwise.
-          # arg $1: platform name or names to look for
-          function check_platform() {
-            if [[ '${{ !secrets.JDK_SUBMIT_FILTER || startsWith(github.ref, 'refs/heads/submit/') }}' == 'false' ]]; then
-              # If JDK_SUBMIT_FILTER is set, and this is not a "submit/" branch, don't run anything
-              echo 'false'
-              return
-            fi
-
-            if [[ $GITHUB_EVENT_NAME == workflow_dispatch ]]; then
-              input='${{ github.event.inputs.platforms }}'
-            elif [[ $GITHUB_EVENT_NAME == push ]]; then
-              input='${{ secrets.JDK_SUBMIT_PLATFORMS }}'
-            else
-              echo 'Internal error in GHA'
-              exit 1
-            fi
-
-            normalized_input="$(echo ,$input, | tr -d ' ')"
-            if [[ "$normalized_input" == ",," ]]; then
-              # For an empty input, assume all platforms should run
-              echo 'true'
-              return
-            else
-              # Check for all acceptable platform names
-              for part in $* ; do
-                if echo "$normalized_input" | grep -q -e ",$part," ; then
-                  echo 'true'
-                  return
-                fi
-              done
-            fi
-
-            echo 'false'
-          }
-
-          echo "linux-x64=$(check_platform linux-x64 linux x64)" >> $GITHUB_OUTPUT
-          echo "linux-x86=$(check_platform linux-x86 linux x86)" >> $GITHUB_OUTPUT
-          echo "linux-x64-variants=$(check_platform linux-x64-variants variants)" >> $GITHUB_OUTPUT
-          echo "linux-cross-compile=$(check_platform linux-cross-compile cross-compile)" >> $GITHUB_OUTPUT
-          echo "macos-x64=$(check_platform macos-x64 macos x64)" >> $GITHUB_OUTPUT
-          echo "macos-aarch64=$(check_platform macos-aarch64 macos aarch64)" >> $GITHUB_OUTPUT
-          echo "windows-x64=$(check_platform windows-x64 windows x64)" >> $GITHUB_OUTPUT
-          echo "windows-aarch64=$(check_platform windows-aarch64 windows aarch64)" >> $GITHUB_OUTPUT
-
-  ###
-  ### Build jobs
-  ###
-
-  build-linux-x64:
-    name: linux-x64
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x64
-      apt-gcc-version: '10=10.3.0-1ubuntu1~20.04'
-    # The linux-x64 jdk bundle is used as buildjdk for the cross-compile job
-    if: needs.select.outputs.linux-x64 == 'true' || needs.select.outputs.linux-cross-compile == 'true'
-
-  build-linux-x86:
-    name: linux-x86
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x86
-      apt-gcc-version: '10-multilib'
-      apt-architecture: 'i386'
-      # Some multilib libraries do not have proper inter-dependencies, so we have to
-      # install their dependencies manually.
-      apt-extra-packages: 'libfreetype6-dev:i386 libtiff-dev:i386 libcupsimage2-dev:i386'
-      extra-conf-options: '--with-target-bits=32'
-    if: needs.select.outputs.linux-x86 == 'true'
-
-  build-linux-x64-hs-nopch:
-    name: linux-x64-hs-nopch
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x64
-      make-target: 'hotspot'
-      debug-levels: '[ "debug" ]'
-      apt-gcc-version: '10=10.3.0-1ubuntu1~20.04'
-      extra-conf-options: '--disable-precompiled-headers'
-    if: needs.select.outputs.linux-x64-variants == 'true'
-
-  build-linux-x64-hs-zero:
-    name: linux-x64-hs-zero
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x64
-      make-target: 'hotspot'
-      debug-levels: '[ "debug" ]'
-      apt-gcc-version: '10=10.3.0-1ubuntu1~20.04'
-      extra-conf-options: '--with-jvm-variants=zero --disable-precompiled-headers'
-    if: needs.select.outputs.linux-x64-variants == 'true'
-
-  build-linux-x64-hs-minimal:
-    name: linux-x64-hs-minimal
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x64
-      make-target: 'hotspot'
-      debug-levels: '[ "debug" ]'
-      apt-gcc-version: '10=10.3.0-1ubuntu1~20.04'
-      extra-conf-options: '--with-jvm-variants=minimal --disable-precompiled-headers'
-    if: needs.select.outputs.linux-x64-variants == 'true'
-
-  build-linux-x64-hs-optimized:
-    name: linux-x64-hs-optimized
-    needs: select
-    uses: ./.github/workflows/build-linux.yml
-    with:
-      platform: linux-x64
-      make-target: 'hotspot'
-      # Technically this is not the "debug" level, but we can't inject a new matrix state for just this job
-      debug-levels: '[ "debug" ]'
-      apt-gcc-version: '10=10.3.0-1ubuntu1~20.04'
-      extra-conf-options: '--with-debug-level=optimized --disable-precompiled-headers'
-    if: needs.select.outputs.linux-x64-variants == 'true'
-
-  build-linux-cross-compile:
-    name: linux-cross-compile
-    needs:
-      - select
-      - build-linux-x64
-    uses: ./.github/workflows/build-cross-compile.yml
-    if: needs.select.outputs.linux-cross-compile == 'true'
-
-  build-macos-x64:
-    name: macos-x64
-    needs: select
-    uses: ./.github/workflows/build-macos.yml
-    with:
-      platform: macos-x64
-      xcode-toolset-version: '11.7'
-    if: needs.select.outputs.macos-x64 == 'true'
-
-  build-macos-aarch64:
-    name: macos-aarch64
-    needs: select
-    uses: ./.github/workflows/build-macos.yml
-    with:
-      platform: macos-aarch64
-      xcode-toolset-version: '12.4'
-      extra-conf-options: '--openjdk-target=aarch64-apple-darwin'
-    if: needs.select.outputs.macos-aarch64 == 'true'
-
-  build-windows-x64:
-    name: windows-x64
-    needs: select
-    uses: ./.github/workflows/build-windows.yml
-    with:
-      platform: windows-x64
-      msvc-toolset-version: '14.29'
-      msvc-toolset-architecture: 'x86.x64'
-    if: needs.select.outputs.windows-x64 == 'true'
-
-  build-windows-aarch64:
-    name: windows-aarch64
-    needs: select
-    uses: ./.github/workflows/build-windows.yml
-    with:
-      platform: windows-aarch64
-      msvc-toolset-version: '14.29'
-      msvc-toolset-architecture: 'arm64'
-      make-target: 'hotspot'
-      extra-conf-options: '--openjdk-target=aarch64-unknown-cygwin'
-    if: needs.select.outputs.windows-aarch64 == 'true'
-
-  ###
-  ### Test jobs
-  ###
-
-  test-linux-x64:
-    name: linux-x64
-    needs:
-      - build-linux-x64
-    uses: ./.github/workflows/test.yml
-    with:
-      platform: linux-x64
-      bootjdk-platform: linux-x64
-      runs-on: ubuntu-20.04
-
-  test-linux-x86:
-    name: linux-x86
-    needs:
-      - build-linux-x86
-    uses: ./.github/workflows/test.yml
-    with:
-      platform: linux-x86
-      bootjdk-platform: linux-x64
-      runs-on: ubuntu-20.04
-
-  test-macos-x64:
-    name: macos-x64
-    needs:
-      - build-macos-x64
-    uses: ./.github/workflows/test.yml
-    with:
-      platform: macos-x64
-      bootjdk-platform: macos-x64
-      runs-on: macos-11
-
-  test-windows-x64:
-    name: windows-x64
-    needs:
-      - build-windows-x64
-    uses: ./.github/workflows/test.yml
-    with:
-      platform: windows-x64
-      bootjdk-platform: windows-x64
-      runs-on: windows-2019
-
-  # Remove bundles so they are not misconstrued as binary distributions from the JDK project
-  remove-bundles:
-    name: 'Remove bundle artifacts'
-    runs-on: ubuntu-20.04
-    if: always()
-    needs:
-      - build-linux-x64
-      - build-linux-x86
-      - build-linux-x64-hs-nopch
-      - build-linux-x64-hs-zero
-      - build-linux-x64-hs-minimal
-      - build-linux-x64-hs-optimized
-      - build-linux-cross-compile
-      - build-macos-x64
-      - build-macos-aarch64
-      - build-windows-x64
-      - build-windows-aarch64
-      - test-linux-x64
-      - test-linux-x86
-      - test-macos-x64
-      - test-windows-x64
-
-    steps:
-        # Hack to get hold of the api environment variables that are only defined for actions
-      - name: 'Get API configuration'
-        id: api
-        uses: actions/github-script@v6
-        with:
-          script: 'return { url: process.env["ACTIONS_RUNTIME_URL"], token: process.env["ACTIONS_RUNTIME_TOKEN"] }'
-
-      - name: 'Remove bundle artifacts'
-        run: |
-          # Find and remove all bundle artifacts
-          ALL_ARTIFACT_URLS="$(curl -s \
-              -H 'Accept: application/json;api-version=6.0-preview' \
-              -H 'Authorization: Bearer ${{ fromJson(steps.api.outputs.result).token }}' \
-              '${{ fromJson(steps.api.outputs.result).url }}_apis/pipelines/workflows/${{ github.run_id }}/artifacts?api-version=6.0-preview')"
-          BUNDLE_ARTIFACT_URLS="$(echo "$ALL_ARTIFACT_URLS" | jq -r -c '.value | map(select(.name|startswith("bundles-"))) | .[].url')"
-          for url in $BUNDLE_ARTIFACT_URLS; do
-            echo "Removing $url"
-            curl -s \
-                -H 'Accept: application/json;api-version=6.0-preview' \
-                -H 'Authorization: Bearer ${{ fromJson(steps.api.outputs.result).token }}' \
-                -X DELETE "$url" \
-            || echo "Failed to remove bundle"
-          done

.github/workflows/test.yml

@@ -1,205 +0,0 @@
-#
-# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-name: 'Run tests'
-
-on:
-  workflow_call:
-    inputs:
-      platform:
-        required: true
-        type: string
-      bootjdk-platform:
-        required: true
-        type: string
-      runs-on:
-        required: true
-        type: string
-
-env:
-  # These are needed to make the MSYS2 bash work properly
-  MSYS2_PATH_TYPE: minimal
-  CHERE_INVOKING: 1
-
-jobs:
-  test:
-    name: test
-    runs-on: ${{ inputs.runs-on }}
-    defaults:
-      run:
-        shell: bash
-
-    strategy:
-      fail-fast: false
-      matrix:
-        test-name:
-          - 'jdk/tier1 part 1'
-          - 'jdk/tier1 part 2'
-          - 'jdk/tier1 part 3'
-          - 'langtools/tier1'
-          - 'hs/tier1 common'
-          - 'hs/tier1 compiler'
-          - 'hs/tier1 gc'
-          - 'hs/tier1 runtime'
-          - 'hs/tier1 serviceability'
-
-        include:
-          - test-name: 'jdk/tier1 part 1'
-            test-suite: 'test/jdk/:tier1_part1'
-
-          - test-name: 'jdk/tier1 part 2'
-            test-suite: 'test/jdk/:tier1_part2'
-
-          - test-name: 'jdk/tier1 part 3'
-            test-suite: 'test/jdk/:tier1_part3'
-
-          - test-name: 'langtools/tier1'
-            test-suite: 'test/langtools/:tier1'
-
-          - test-name: 'hs/tier1 common'
-            test-suite: 'test/hotspot/jtreg/:tier1_common'
-            debug-suffix: -debug
-
-          - test-name: 'hs/tier1 compiler'
-            test-suite: 'test/hotspot/jtreg/:tier1_compiler'
-            debug-suffix: -debug
-
-          - test-name: 'hs/tier1 gc'
-            test-suite: 'test/hotspot/jtreg/:tier1_gc'
-            debug-suffix: -debug
-
-          - test-name: 'hs/tier1 runtime'
-            test-suite: 'test/hotspot/jtreg/:tier1_runtime'
-            debug-suffix: -debug
-
-          - test-name: 'hs/tier1 serviceability'
-            test-suite: 'test/hotspot/jtreg/:tier1_serviceability'
-            debug-suffix: -debug
-
-    steps:
-      - name: 'Checkout the JDK source'
-        uses: actions/checkout@v3
-
-      - name: 'Get MSYS2'
-        uses: ./.github/actions/get-msys2
-        if: runner.os == 'Windows'
-
-      - name: 'Get the BootJDK'
-        id: bootjdk
-        uses: ./.github/actions/get-bootjdk
-        with:
-          platform: ${{ inputs.bootjdk-platform }}
-
-      - name: 'Get JTReg'
-        id: jtreg
-        uses: ./.github/actions/get-jtreg
-
-      - name: 'Get bundles'
-        id: bundles
-        uses: ./.github/actions/get-bundles
-        with:
-          platform: ${{ inputs.platform }}
-          debug-suffix: ${{ matrix.debug-suffix }}
-
-      - name: 'Install dependencies'
-        run: |
-          # On macOS we need to install some dependencies for testing
-          brew install make
-          sudo xcode-select --switch /Applications/Xcode_11.7.app/Contents/Developer
-          # This will make GNU make available as 'make' and not only as 'gmake'
-          echo '/usr/local/opt/make/libexec/gnubin' >> $GITHUB_PATH
-        if: runner.os == 'macOS'
-
-      - name: 'Set PATH'
-        id: path
-        run: |
-          # We need a minimal PATH on Windows
-          # Set PATH to "", so just GITHUB_PATH is included
-          if [[ '${{ runner.os }}' == 'Windows' ]]; then
-            echo "value=" >> $GITHUB_OUTPUT
-          else
-            echo "value=$PATH" >> $GITHUB_OUTPUT
-          fi
-
-      - name: 'Run tests'
-        id: run-tests
-        run: >
-          make test-prebuilt
-          TEST='${{ matrix.test-suite }}'
-          BOOT_JDK=${{ steps.bootjdk.outputs.path }}
-          JT_HOME=${{ steps.jtreg.outputs.path }}
-          JDK_IMAGE_DIR=${{ steps.bundles.outputs.jdk-path }}
-          SYMBOLS_IMAGE_DIR=${{ steps.bundles.outputs.symbols-path }}
-          TEST_IMAGE_DIR=${{ steps.bundles.outputs.tests-path }}
-          JTREG='JAVA_OPTIONS=-XX:-CreateCoredumpOnCrash;VERBOSE=fail,error,time;KEYWORDS=!headful'
-          && bash ./.github/scripts/gen-test-summary.sh "$GITHUB_STEP_SUMMARY" "$GITHUB_OUTPUT"
-        env:
-          PATH: ${{ steps.path.outputs.value }}
-
-        # This is a separate step, since if the markdown from a step gets bigger than
-        # 1024 kB it is skipped, but then the short summary above is still generated
-      - name: 'Generate test report'
-        run: bash ./.github/scripts/gen-test-results.sh "$GITHUB_STEP_SUMMARY"
-        if: always()
-
-      - name: 'Package test results'
-        id: package
-        run: |
-          # Package test-results and relevant parts of test-support
-          mkdir results
-
-          if [[ -d build/run-test-prebuilt/test-results ]]; then
-            cd build/run-test-prebuilt/test-results/
-            zip -r -9 "$GITHUB_WORKSPACE/results/test-results.zip" .
-            cd $GITHUB_WORKSPACE
-          else
-            echo '::warning ::Missing test-results directory'
-          fi
-
-          if [[ -d build/run-test-prebuilt/test-support ]]; then
-            cd build/run-test-prebuilt/test-support/
-            zip -r -9 "$GITHUB_WORKSPACE/results/test-support.zip" . -i *.jtr -i */hs_err*.log -i */replay*.log
-            cd $GITHUB_WORKSPACE
-          else
-            echo '::warning ::Missing test-support directory'
-          fi
-
-          artifact_name="results-${{ inputs.platform }}-$(echo ${{ matrix.test-name }} | tr '/ ' '__')"
-          echo "artifact-name=$artifact_name" >> $GITHUB_OUTPUT
-        if: always()
-
-      - name: 'Upload test results'
-        uses: actions/upload-artifact@v3
-        with:
-          path: results
-          name: ${{ steps.package.outputs.artifact-name }}
-        if: always()
-
-        # This is the best way I found to abort the job with an error message
-      - name: 'Notify about test failures'
-        uses: actions/github-script@v6
-        with:
-          script: core.setFailed('${{ steps.run-tests.outputs.error-message }}')
-        if: steps.run-tests.outputs.failure == 'true'

.gitignore

@@ -18,7 +18,3 @@ NashornProfile.txt
 /src/utils/LogCompilation/target/
 /.project/
 /.settings/
-/compile_commands.json
-/.cache
-*.class
-.idea/workspace.xml

.jcheck/conf

@@ -1,7 +1,7 @@
 [general]
-project=jdk-updates
+project=jdk
 jbs=JDK
-version=17.0.8
+version=19
 
 [checks]
 error=author,committer,reviewers,merge,issues,executable,symlink,message,hg-tag,whitespace,problemlists

README.md

@@ -1,191 +1,11 @@
-[![official JetBrains project](http://jb.gg/badges/official.svg)](https://confluence.jetbrains.com/display/ALL/JetBrains+on+GitHub)
+# Welcome to the JDK!
 
-# Welcome to JetBrains Runtime!
+For build instructions please see the
+[online documentation](https://openjdk.java.net/groups/build/doc/building.html),
+or either of these files:
 
-JetBrains Runtime is a fork of [OpenJDK](https://github.com/openjdk/jdk) available for Windows, Mac OS X, and Linux.
-It includes a number of enhancements in font rendering, ligatures, HiDPI support, windowing/focus subsystems, performance improvements, and bugfixes.
+- [doc/building.html](doc/building.html) (html version)
+- [doc/building.md](doc/building.md) (markdown version)
 
-## Releases
-Download the latest releases of JetBrains Runtime to use with JetBrains IDEs. The full list
-can be found on the [releases page](https://github.com/JetBrains/JetBrainsRuntime/releases).
-
-| IDE Version | Latest JBR                                                                                             | Date Released |
-|  ---        |--------------------------------------------------------------------------------------------------------|---------------|
-| 2023.1      | [17.0.6-b829.1](https://github.com/JetBrains/JetBrainsRuntime/releases/tag/jbr-release-17.0.6b829.1)   | 14-Feb-2023   |
-| 2022.3      | [17.0.5-b653.25](https://github.com/JetBrains/JetBrainsRuntime/releases/tag/jbr-release-17.0.5b653.25) | 10-Jan-2023   |
-| 2022.2      | [17.0.5-b469.71](https://github.com/JetBrains/JetBrainsRuntime/releases/tag/jbr-release-17.0.5b469.71) | 14-Nov-2022   |
-
-
-## Contents
-- [Welcome to JetBrains Runtime](#welcome-to-jetbrains-runtime)
-  - [Products Built on JetBrains Runtime](#products-built-on-jetbrains-runtime)
-  - [Getting Sources](#getting-sources)
-    - [macOS, Linux](#macos-linux)
-    - [Windows](#sources-windows)
-  - [Configuring the Build Environment](#configuring-the-build-environment)
-    - [Linux (Docker)](#linux-docker)
-    - [Ubuntu Linux](#ubuntu-linux)
-    - [Windows](#build-windows)
-    - [macOS](#macos)
-  - [Developing](#developing)
-  - [Contributing](#contributing)
-  - [Resources](#resources)
-
-## Products Built on JetBrains Runtime
-* [Android Studio](https://developer.android.com/studio). The official IDE for Google's Android operating system.
-* [CLion](https://www.jetbrains.com/clion/). A cross-platform IDE for C and C++ from JetBrains.
-* [DataGrip](https://www.jetbrains.com/datagrip/). The IDE for Databases and SQL from JetBrains.
-* [GoLand](https://www.jetbrains.com/go/). The cross-platform Go IDE from JetBrains.
-* [IntelliJ IDEA](https://www.jetbrains.com/idea/). The IDE for JVM from JetBrains.
-* [JProfiler](https://www.ej-technologies.com/products/jprofiler/overview.html). The Java profiler.
-* [PhpStorm](https://www.jetbrains.com/phpstorm/). The PHP IDE from JetBrains.
-* [PyCharm](https://www.jetbrains.com/pycharm/). The Python IDE from JetBrains.
-* [Rider](https://www.jetbrains.com/rider/). The cross-platform .NET IDE from JetBrains.
-* [RubyMine](https://www.jetbrains.com/ruby/). The Ruby and Rails IDE from JetBrains.
-* [Toolbox App](https://www.jetbrains.com/toolbox-app/). JetBrains IDE manager.
-* [WebStorm](https://www.jetbrains.com/webstorm/). The JavaScript IDE from JetBrains.
-* [YourKit](https://www.yourkit.com/). Java and .NET profilers.
-
-## Getting Sources
-### macOS, Linux
-```
-git config --global core.autocrlf input
-git clone git@github.com:JetBrains/JetBrainsRuntime.git
-```
-
-### Windows
-<a name="sources-windows"></a>
-```
-git config --global core.autocrlf false
-git clone git@github.com:JetBrains/JetBrainsRuntime.git
-```
-
-## Configuring the Build Environment
-Here are quick per-platform instructions for those who can't wait to get started. 
-Please refer to [OpenJDK build docs](https://openjdk.java.net/groups/build/doc/building.html) for in-depth
-coverage of all the details.
-
-> **_TIP:_**  To get a preliminary report of what's missing, run `./configure` and check its output. 
-> It would usually have a meaningful advice on how to solve the problem.
-
-### Linux (Docker)
-Create a container:
-```
-$ cd jb/project/docker
-$ docker build .
-...
-Successfully built 942ea9900054
-```
-Run these commands in the new container:
-```
-$ docker run -v `pwd`../../../../:/JetBrainsRuntime -it 942ea9900054
-# cd /JetBrainsRuntime
-# git checkout jbr17
-# sh ./configure
-# make images CONF=linux-x86_64-normal-server-release
-```
-
-### Ubuntu Linux
-Install the necessary tools, libraries, and headers with:
-```
-$ sudo apt-get install autoconf make build-essential libx11-dev libxext-dev libxrender-dev libxtst-dev \
-       libxt-dev libxrandr-dev libcups2-dev libfontconfig1-dev libasound2-dev libspeechd-dev \
-       java-16-amazon-corretto-jdk
-```
-Then run the following:
-```
-$ cd JetBrainsRuntime
-$ git checkout jbr17
-$ sh ./configure
-$ make images
-```
-This will build the release configuration under `./build/linux-x86_64-server-release/`.
-
-### Windows
-<a name="build-windows"></a>
-Install the following:
-* [Cygwin x64](http://www.cygwin.com/).
-  Required packages: `autoconf`, `binutils`, `cpio`, `diffutils`, `file`, `gawk`, `gcc-core`, `make`, `m4`, `unzip`, `zip`.  
-  Install those together with Cygwin.
-* [Visual Studio compiler toolset](https://visualstudio.microsoft.com/downloads/).
-  Install with the desktop development kit, which includes Windows SDK and compilers.
-  Visual Studio 2019 is supported by default.
-* Java 16 (for instance, from [AdoptOpenJDK](https://adoptopenjdk.net/installation.html?variant=openjdk16&jvmVariant=hotspot#)).
-  If you have problems while configuring, read [Java tips on Cygwin](http://horstmann.com/articles/cygwin-tips.html).
-
-From the command line: 
-```
-"C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvarsall.bat" amd64
-"c:\Program_Files\cygwin64\bin\mintty.exe" /bin/bash -l
-```
-The first command sets up environment variables, the second starts a Cygwin shell with the proper environment.  
-
-In the Cygwin shell: 
-```
-$ cd JetBrainsRuntime
-$ git checkout jbr17
-$ bash configure --with-toolchain-version=2019
-$ make images
-```
-This will build the release configuration under `./build/windows-x86_64-server-release/`.
-
-#### Enable optional NVDA screen reader support
-If you want to add support of a11y announcing via [NVDA screen reader](https://www.nvaccess.org/about-nvda/),
-you will need to bundle the NVDA Controller Client library.
-You can do it with the following steps:
-1. Download the NVDA Controller Client library. You can find the link in its official README [here](https://github.com/nvaccess/nvda/blob/master/extras/controllerClient/readme.md)
-2. Pass the path to the unpacked package to `configure` via an additional flag `--with-nvdacontrollerclient=<path>`.
-   The build system will search the required library files under `<path>/<target-arch>`.
-
-#### Disable optional JAWS screen reader support
-JBR is built with built-in support of JAWS screen reader.
-If you want to disable it, run `configure` with the additional flag `--disable-jaws-client`.
-
-### macOS
-Install the following:
-* Xcode command line developer tools and `autoconf` via [Homebrew](https://brew.sh/).
-* Java 16 (for instance, from [AdoptOpenJDK](https://adoptopenjdk.net/installation.html?variant=openjdk16&jvmVariant=hotspot#)).
-
-From the command line:
-```
-$ cd JetBrainsRuntime
-$ git checkout jbr17
-$ sh ./configure
-$ make images
-```
-This will build the release configuration under `./build/macosx-x86_64-server-release/`.
-
-## Developing
-You can use  [CLion](https://www.jetbrains.com/clion/) to develop native parts of the JetBrains Runtime and
-[IntelliJ IDEA](https://www.jetbrains.com/idea/) for the parts written in Java.
-Both require projects to be created.
-
-### CLion
-Run
-```
-$ make compile-commands
-```
-in the git root and open the resulting `build/.../compile_commands.json` file as a project.
-Then use `Tools | Compilation Database | Change Project Root` to point to git root of this repository.
-
-See also this detailed step-by-step tutorial for all platforms:
-[How to develop OpenJDK with CLion](https://blog.jetbrains.com/clion/2020/03/openjdk-with-clion/).
-
-### IDEA
-Run
-```
-$ sh ./bin/idea.sh
-```
-in the git root to generate project files (add `--help` for options). If you have multiple
-configurations (for example, `release` and `fastdebug`), supply the `--conf <conf_name>` argument.
-Then open the git root directory as a project in IDEA.
-
-## Contributing
-We are happy to receive your pull requests! 
-Before you submit one, please sign our [Contributor License Agreement (CLA)](https://www.jetbrains.com/agreements/cla/).
-
-## Resources
-* [JetBrains Runtime on GitHub](https://github.com/JetBrains/JetBrainsRuntime).
-* [OpenJDK build instructions](https://openjdk.java.net/groups/build/doc/building.html).
-* [OpenJDK test instructions](https://htmlpreview.github.io/?https://raw.githubusercontent.com/openjdk/jdk/master/doc/building.html#running-tests).
-* [How to develop OpenJDK with CLion](https://blog.jetbrains.com/clion/2020/03/openjdk-with-clion/).
+See <https://openjdk.java.net/> for more information about
+the OpenJDK Community and the JDK.

bin/idea.sh

@@ -25,26 +25,7 @@
 # Shell script for generating an IDEA project from a given list of modules
 
 usage() {
-      echo "Usage: $0 [-h|--help] [-q|--quiet] [-a|--absolute-paths] [-r|--root <path>] [-o|--output <path>] [-c|--conf <conf_name>] [modules...]"
-      echo "    -h | --help"
-      echo "    -q | --quiet
-        No stdout output"
-      echo "    -a | --absolute-paths
-        Use absolute paths to this jdk, so that generated .idea
-        project files can be moved independently of jdk sources"
-      echo "    -r | --root <path>
-        Project content root
-        Default: $TOPLEVEL_DIR"
-      echo "    -o | --output <path>
-        Where .idea directory with project files will be generated
-        (e.g. using '-o .' will place project files in './.idea')
-        Default: same as --root"
-      echo "    -c | --conf <conf_name>
-        make configuration (release, slowdebug etc)"
-      echo "    [modules...]
-        Generate project modules for specific java modules
-        (e.g. 'java.base java.desktop')
-        Default: all existing modules (java.* and jdk.*)"
+      echo "usage: $0 [-h|--help] [-v|--verbose] [-o|--output <path>] [-c|--conf <conf_name>] [modules]+"
       exit 1
 }
 
@@ -52,13 +33,10 @@ SCRIPT_DIR=`dirname $0`
 #assume TOP is the dir from which the script has been called
 TOP=`pwd`
 cd $SCRIPT_DIR; SCRIPT_DIR=`pwd`
-if [ "x$TOPLEVEL_DIR" = "x" ] ; then
-  cd .. ; TOPLEVEL_DIR=`pwd`
-fi
 cd $TOP;
 
-VERBOSE=true
-ABSOLUTE_PATHS=false
+IDEA_OUTPUT=$TOP/.idea
+VERBOSE="false"
 CONF_ARG=
 while [ $# -gt 0 ]
 do
@@ -67,24 +45,14 @@ do
       usage
       ;;
 
-    -q | --quiet )
-      VERBOSE=false
-      ;;
-
-    -a | --absolute-paths )
-      ABSOLUTE_PATHS=true
-      ;;
-
-    -r | --root )
-      TOPLEVEL_DIR="$2"
-      shift
+    -v | --vebose )
+      VERBOSE="true"
       ;;
 
     -o | --output )
-      IDEA_OUTPUT="$2/.idea"
+      IDEA_OUTPUT=$2/.idea
       shift
       ;;
-
     -c | --conf )
       CONF_ARG="CONF_NAME=$2"
       shift
@@ -101,20 +69,22 @@ do
   shift
 done
 
-if [ "x$IDEA_OUTPUT" = "x" ] ; then
-  IDEA_OUTPUT="$TOPLEVEL_DIR/.idea"
+if [ -e $IDEA_OUTPUT ] ; then
+    rm -r $IDEA_OUTPUT
+fi
+mkdir -p $IDEA_OUTPUT || exit 1
+cd $IDEA_OUTPUT; IDEA_OUTPUT=`pwd`
+
+if [ "x$TOPLEVEL_DIR" = "x" ] ; then
+    cd $SCRIPT_DIR/..
+    TOPLEVEL_DIR=`pwd`
+    cd $IDEA_OUTPUT
 fi
 
-mkdir -p $IDEA_OUTPUT || exit 1
-cd "$TOP" ; cd $TOPLEVEL_DIR; TOPLEVEL_DIR=`pwd`
-cd "$TOP" ; cd $IDEA_OUTPUT; IDEA_OUTPUT=`pwd`
-cd ..; IDEA_OUTPUT_PARENT=`pwd`
-cd "$SCRIPT_DIR/.." ; OPENJDK_DIR=`pwd`
-
-IDEA_MAKE="$OPENJDK_DIR/make/ide/idea/jdk"
+MAKE_DIR="$SCRIPT_DIR/../make"
+IDEA_MAKE="$MAKE_DIR/ide/idea/jdk"
 IDEA_TEMPLATE="$IDEA_MAKE/template"
 
-cp -r "$TOPLEVEL_DIR/jb/project/idea-project-files"/* "$IDEA_OUTPUT"
 cp -r "$IDEA_TEMPLATE"/* "$IDEA_OUTPUT"
 
 #override template
@@ -124,31 +94,31 @@ if [ -d "$TEMPLATES_OVERRIDE" ] ; then
     done
 fi
 
-if [ "$VERBOSE" = true ] ; then
-  echo "Will generate IDEA project files in \"$IDEA_OUTPUT\" for project \"$TOPLEVEL_DIR\""
+if [ "$VERBOSE" = "true" ] ; then
+  echo "output dir: $IDEA_OUTPUT"
+  echo "idea template dir: $IDEA_TEMPLATE"
 fi
 
-cd $TOP ; make -f "$IDEA_MAKE/idea.gmk" -I "$OPENJDK_DIR" idea TOPLEVEL_DIR="$TOPLEVEL_DIR" \
-    MAKEOVERRIDES= IDEA_OUTPUT_PARENT="$IDEA_OUTPUT_PARENT" OUT="$IDEA_OUTPUT/env.cfg" MODULES="$*" $CONF_ARG || exit 1
+cd $TOP ; make -f "$IDEA_MAKE/idea.gmk" -I $MAKE_DIR/.. idea MAKEOVERRIDES= OUT=$IDEA_OUTPUT/env.cfg MODULES="$*" $CONF_ARG || exit 1
 cd $SCRIPT_DIR
 
 . $IDEA_OUTPUT/env.cfg
 
-# Expect MODULES, MODULE_NAMES, RELATIVE_PROJECT_DIR, RELATIVE_BUILD_DIR to be set
-if [ "xMODULES" = "x" ] ; then
-  echo "FATAL: MODULES is empty" >&2; exit 1
+# Expect MODULE_ROOTS, MODULE_NAMES, BOOT_JDK & SPEC to be set
+if [ "x$MODULE_ROOTS" = "x" ] ; then
+  echo "FATAL: MODULE_ROOTS is empty" >&2; exit 1
 fi
 
 if [ "x$MODULE_NAMES" = "x" ] ; then
   echo "FATAL: MODULE_NAMES is empty" >&2; exit 1
 fi
 
-if [ "x$RELATIVE_PROJECT_DIR" = "x" ] ; then
-  echo "FATAL: RELATIVE_PROJECT_DIR is empty" >&2; exit 1
+if [ "x$BOOT_JDK" = "x" ] ; then
+  echo "FATAL: BOOT_JDK is empty" >&2; exit 1
 fi
 
-if [ "x$RELATIVE_BUILD_DIR" = "x" ] ; then
-  echo "FATAL: RELATIVE_BUILD_DIR is empty" >&2; exit 1
+if [ "x$SPEC" = "x" ] ; then
+  echo "FATAL: SPEC is empty" >&2; exit 1
 fi
 
 if [ -d "$TOPLEVEL_DIR/.hg" ] ; then
@@ -159,43 +129,6 @@ if [ -d "$TOPLEVEL_DIR/.git" ] ; then
     VCS_TYPE="Git"
 fi
 
-if [ "$ABSOLUTE_PATHS" = true ] ; then
-  if [ "x$PATHTOOL" != "x" ]; then
-    PROJECT_DIR="`$PATHTOOL -am $OPENJDK_DIR`"
-    TOPLEVEL_PROJECT_DIR="`$PATHTOOL -am $TOPLEVEL_DIR`"
-  else
-    PROJECT_DIR="$OPENJDK_DIR"
-    TOPLEVEL_PROJECT_DIR="$TOPLEVEL_DIR"
-  fi
-  MODULE_DIR="$PROJECT_DIR"
-  TOPLEVEL_MODULE_DIR="$TOPLEVEL_PROJECT_DIR"
-  cd "$IDEA_OUTPUT_PARENT" && cd "$RELATIVE_BUILD_DIR" && BUILD_DIR="`pwd`"
-  CLION_SCRIPT_TOPDIR="$OPENJDK_DIR"
-  CLION_PROJECT_DIR="$PROJECT_DIR"
-else
-  if [ "$RELATIVE_PROJECT_DIR" = "." ] ; then
-    PROJECT_DIR=""
-  else
-    PROJECT_DIR="/$RELATIVE_PROJECT_DIR"
-  fi
-  if [ "$RELATIVE_TOPLEVEL_PROJECT_DIR" = "." ] ; then
-    TOPLEVEL_PROJECT_DIR=""
-  else
-    TOPLEVEL_PROJECT_DIR="/$RELATIVE_TOPLEVEL_PROJECT_DIR"
-  fi
-  MODULE_DIR="\$MODULE_DIR\$$PROJECT_DIR"
-  PROJECT_DIR="\$PROJECT_DIR\$$PROJECT_DIR"
-  TOPLEVEL_MODULE_DIR="\$MODULE_DIR\$$TOPLEVEL_PROJECT_DIR"
-  TOPLEVEL_PROJECT_DIR="\$PROJECT_DIR\$$TOPLEVEL_PROJECT_DIR"
-  BUILD_DIR="\$PROJECT_DIR\$/$RELATIVE_BUILD_DIR"
-  CLION_SCRIPT_TOPDIR="$CLION_RELATIVE_PROJECT_DIR"
-  CLION_PROJECT_DIR="\$PROJECT_DIR\$/$CLION_SCRIPT_TOPDIR"
-fi
-if [ "$VERBOSE" = true ] ; then
-  echo "Project root: $PROJECT_DIR"
-  echo "Generating IDEA project files..."
-fi
-
 ### Replace template variables
 
 NUM_REPLACEMENTS=0
@@ -219,106 +152,112 @@ add_replacement() {
     eval TO$NUM_REPLACEMENTS='$2'
 }
 
-add_replacement "###PATHTOOL###" "$PATHTOOL"
-add_replacement "###CLION_SCRIPT_TOPDIR###" "$CLION_SCRIPT_TOPDIR"
-add_replacement "###CLION_PROJECT_DIR###" "$CLION_PROJECT_DIR"
-add_replacement "###PROJECT_DIR###" "$PROJECT_DIR"
-add_replacement "###MODULE_DIR###" "$MODULE_DIR"
-add_replacement "###TOPLEVEL_PROJECT_DIR###" "$TOPLEVEL_PROJECT_DIR"
-add_replacement "###TOPLEVEL_MODULE_DIR###" "$TOPLEVEL_MODULE_DIR"
 add_replacement "###MODULE_NAMES###" "$MODULE_NAMES"
 add_replacement "###VCS_TYPE###" "$VCS_TYPE"
-add_replacement "###BUILD_DIR###" "$BUILD_DIR"
-add_replacement "###RELATIVE_BUILD_DIR###" "$RELATIVE_BUILD_DIR"
-if [ "x$PATHTOOL" != "x" ]; then
-  add_replacement "###BASH_RUNNER_PREFIX###" "\$PROJECT_DIR\$/.idea/bash.bat"
-else
-  add_replacement "###BASH_RUNNER_PREFIX###" ""
-fi
-if [ "x$PATHTOOL" != "x" ]; then
+SPEC_DIR=`dirname $SPEC`
+if [ "x$CYGPATH" != "x" ]; then
+    add_replacement "###BUILD_DIR###" "`$CYGPATH -am $SPEC_DIR`"
+    add_replacement "###IMAGES_DIR###" "`$CYGPATH -am $SPEC_DIR`/images/jdk"
+    add_replacement "###ROOT_DIR###" "`$CYGPATH -am $TOPLEVEL_DIR`"
+    add_replacement "###IDEA_DIR###" "`$CYGPATH -am $IDEA_OUTPUT`"
     if [ "x$JT_HOME" = "x" ]; then
       add_replacement "###JTREG_HOME###" ""
     else
-      add_replacement "###JTREG_HOME###" "`$PATHTOOL -am $JT_HOME`"
+      add_replacement "###JTREG_HOME###" "`$CYGPATH -am $JT_HOME`"
+    fi
+elif [ "x$WSL_DISTRO_NAME" != "x" ]; then
+    add_replacement "###BUILD_DIR###" "`wslpath -am $SPEC_DIR`"
+    add_replacement "###IMAGES_DIR###" "`wslpath -am $SPEC_DIR`/images/jdk"
+    add_replacement "###ROOT_DIR###" "`wslpath -am $TOPLEVEL_DIR`"
+    add_replacement "###IDEA_DIR###" "`wslpath -am $IDEA_OUTPUT`"
+    if [ "x$JT_HOME" = "x" ]; then
+      add_replacement "###JTREG_HOME###" ""
+    else
+      add_replacement "###JTREG_HOME###" "`wslpath -am $JT_HOME`"
     fi
 else
+    add_replacement "###BUILD_DIR###" "$SPEC_DIR"
     add_replacement "###JTREG_HOME###" "$JT_HOME"
+    add_replacement "###IMAGES_DIR###" "$SPEC_DIR/images/jdk"
+    add_replacement "###ROOT_DIR###" "$TOPLEVEL_DIR"
+    add_replacement "###IDEA_DIR###" "$IDEA_OUTPUT"
 fi
 
-MODULE_IMLS=""
-TEST_MODULE_DEPENDENCIES=""
-for module in $MODULE_NAMES; do
-    MODULE_IMLS="$MODULE_IMLS<module fileurl=\"file://\$PROJECT_DIR$/.idea/$module.iml\" filepath=\"\$PROJECT_DIR$/.idea/$module.iml\" /> "
-    TEST_MODULE_DEPENDENCIES="$TEST_MODULE_DEPENDENCIES<orderEntry type=\"module\" module-name=\"$module\" scope=\"TEST\" /> "
+SOURCE_PREFIX="<sourceFolder url=\"file://"
+SOURCE_POSTFIX="\" isTestSource=\"false\" />"
+
+for root in $MODULE_ROOTS; do
+    if [ "x$CYGPATH" != "x" ]; then
+      root=`$CYGPATH -am $root`
+    elif [ "x$WSL_DISTRO_NAME" != "x" ]; then
+      root=`wslpath -am $root`
+    fi
+
+    VM_CI="jdk.internal.vm.ci/share/classes"
+    VM_COMPILER="src/jdk.internal.vm.compiler/share/classes"
+    if test "${root#*$VM_CI}" != "$root" || test "${root#*$VM_COMPILER}" != "$root"; then
+        for subdir in "$root"/*; do
+            if [ -d "$subdir" ]; then
+                SOURCES=$SOURCES" $SOURCE_PREFIX""$subdir"/src"$SOURCE_POSTFIX"
+            fi
+        done
+    else
+        SOURCES=$SOURCES" $SOURCE_PREFIX""$root""$SOURCE_POSTFIX"
+    fi
 done
-add_replacement "###MODULE_IMLS###" "$MODULE_IMLS"
-add_replacement "###TEST_MODULE_DEPENDENCIES###" "$TEST_MODULE_DEPENDENCIES"
+
+add_replacement "###SOURCE_ROOTS###" "$SOURCES"
 
 replace_template_dir "$IDEA_OUTPUT"
 
-### Generate module project files
+### Compile the custom Logger
 
-if [ "$VERBOSE" = true ] ; then
-    echo "Generating project modules:"
-  fi
-(
-DEFAULT_IFS="$IFS"
-IFS='#'
-for value in $MODULES; do
-  (
-  eval "$value"
-  if [ "$VERBOSE" = true ] ; then
-    echo "    $module"
-  fi
-  MAIN_SOURCE_DIRS=""
-  CONTENT_ROOTS=""
-  IFS=' '
-  for dir in $moduleSrcDirs; do
-    case $dir in
-      "src/"*) MAIN_SOURCE_DIRS="$MAIN_SOURCE_DIRS <sourceFolder url=\"file://$MODULE_DIR/$dir\" isTestSource=\"false\" />" ;;
-      *"/support/gensrc/$module") ;; # Exclude generated sources to avoid module-info conflicts, see https://youtrack.jetbrains.com/issue/IDEA-185108
-      *) CONTENT_ROOTS="$CONTENT_ROOTS <content url=\"file://$MODULE_DIR/$dir\">\
-      <sourceFolder url=\"file://$MODULE_DIR/$dir\" isTestSource=\"false\" generated=\"true\" /></content>" ;;
-    esac
-  done
-  if [ "x$MAIN_SOURCE_DIRS" != "x" ] ; then
-    CONTENT_ROOTS="<content url=\"file://$MODULE_DIR/src/$module\">$MAIN_SOURCE_DIRS</content>$CONTENT_ROOTS"
-  fi
-  add_replacement "###MODULE_CONTENT_ROOTS###" "$CONTENT_ROOTS"
-  DEPENDENCIES=""
-  for dep in $moduleDependencies; do
-    case $MODULE_NAMES in # Exclude skipped modules from dependencies
-      *"$dep"*) DEPENDENCIES="$DEPENDENCIES<orderEntry type=\"module\" module-name=\"$dep\" /> "
-    esac
-  done
-  add_replacement "###DEPENDENCIES###" "$DEPENDENCIES"
-  cp "$IDEA_OUTPUT/module.iml" "$IDEA_OUTPUT/$module.iml"
-  IFS="$DEFAULT_IFS"
-  replace_template_file "$IDEA_OUTPUT/$module.iml"
-  )
-done
-)
-rm "$IDEA_OUTPUT/module.iml"
+CLASSES=$IDEA_OUTPUT/classes
 
-### Create shell script runner for Windows
+if [ "x$ANT_HOME" = "x" ] ; then
+   # try some common locations, before giving up
+   if [ -f "/usr/share/ant/lib/ant.jar" ] ; then
+     ANT_HOME="/usr/share/ant"
+   elif [ -f "/usr/local/Cellar/ant/1.9.4/libexec/lib/ant.jar" ] ; then
+     ANT_HOME="/usr/local/Cellar/ant/1.9.4/libexec"
+   else
+     echo "FATAL: cannot find ant. Try setting ANT_HOME." >&2; exit 1
+   fi
+fi
+CP=$ANT_HOME/lib/ant.jar
+rm -rf $CLASSES; mkdir $CLASSES
 
-if [ "x$PATHTOOL" != "x" ]; then
-  echo "@echo off" > "$IDEA_OUTPUT/bash.bat"
-  if [ "x$WSL_DISTRO_NAME" != "x" ] ; then
-    echo "wsl -d $WSL_DISTRO_NAME --cd \"%cd%\" -e %*" >> "$IDEA_OUTPUT/bash.bat"
-  else
-    echo "$WINENV_ROOT\bin\bash.exe -l -c \"cd %CD:\=/%/ && %*\"" >> "$IDEA_OUTPUT/bash.bat"
-  fi
+# If we have a Windows boot JDK, we need a .exe suffix
+if [ -e "$BOOT_JDK/bin/java.exe" ] ; then
+  JAVAC=javac.exe
+else 
+  JAVAC=javac
 fi
 
-
-
-if [ "$VERBOSE" = true ] ; then
-  IDEA_PROJECT_DIR="`dirname $IDEA_OUTPUT`"
-  if [ "x$PATHTOOL" != "x" ]; then
-    IDEA_PROJECT_DIR="`$PATHTOOL -am $IDEA_PROJECT_DIR`"
-  fi
-  echo "
-Now you can open \"$IDEA_PROJECT_DIR\" as IDEA project
-You can also run 'bash \"$IDEA_OUTPUT/jdk-clion/update-project.sh\"' to generate Clion project"
+# If we are on WSL, the boot JDK might be either Windows or Linux,
+# and we need to use realpath instead of CYGPATH to make javac work on both.
+# We need to handle this case first since CYGPATH might be set on WSL.
+if [ "x$WSL_DISTRO_NAME" != "x" ]; then
+  JAVAC_SOURCE_FILE=`realpath --relative-to=./ $IDEA_OUTPUT/src/idea/IdeaLoggerWrapper.java`
+  JAVAC_SOURCE_PATH=`realpath --relative-to=./ $IDEA_OUTPUT/src`
+  JAVAC_CLASSES=`realpath --relative-to=./ $CLASSES`
+  ANT_TEMP=`mktemp -d -p ./`
+  cp $ANT_HOME/lib/ant.jar $ANT_TEMP/ant.jar
+  JAVAC_CP=$ANT_TEMP/ant.jar
+elif [ "x$CYGPATH" != "x" ] ; then ## CYGPATH may be set in env.cfg
+  JAVAC_SOURCE_FILE=`$CYGPATH -am $IDEA_OUTPUT/src/idea/IdeaLoggerWrapper.java`
+  JAVAC_SOURCE_PATH=`$CYGPATH -am $IDEA_OUTPUT/src`
+  JAVAC_CLASSES=`$CYGPATH -am $CLASSES`
+  JAVAC_CP=`$CYGPATH -am $CP`
+else
+  JAVAC_SOURCE_FILE=$IDEA_OUTPUT/src/idea/IdeaLoggerWrapper.java
+  JAVAC_SOURCE_PATH=$IDEA_OUTPUT/src
+  JAVAC_CLASSES=$CLASSES
+  JAVAC_CP=$CP
 fi
+
+$BOOT_JDK/bin/$JAVAC -d $JAVAC_CLASSES -sourcepath $JAVAC_SOURCE_PATH -cp $JAVAC_CP $JAVAC_SOURCE_FILE
+
+if [ "x$WSL_DISTRO_NAME" != "x" ]; then
+  rm -rf $ANT_TEMP
+fi

bin/jib.sh

@@ -128,15 +128,6 @@ install_jib() {
             exit 1
         fi
     fi
-    # Want to check the filetype using file, to see if we got served a HTML error page.
-    # This is sensitive to the filename containing a specific string, but good enough.
-    file "${installed_jib_script}.gz" | grep "gzip compressed data" > /dev/null
-    if [ $? -ne 0 ]; then 
-        echo "Warning: ${installed_jib_script}.gz is not a gzip file."
-        echo "If you are behind a proxy you may need to configure exceptions using no_proxy."
-        echo "The download URL was: ${jib_url}"
-        exit 1
-    fi
     echo "Extracting JIB bootstrap script"
     rm -f "${installed_jib_script}"
     gunzip "${installed_jib_script}.gz"

bin/print-config.js

@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2015, 2016, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-/*
- * This little utility can be used to expand the jib-profiles configuration
- * files into plain json.
- *
- * Usage:
- *
- *   jjs -scripting print-config.js -- [<jib-profiles.js>]
- *
- */
-
-var file = $ARG[0];
-if (file == null) {
-    file = new java.io.File(__DIR__, "../conf/jib-profiles.js").getCanonicalPath();
-}
-load(file);
-var input = {};
-input.get = function(dependencyName, attribute) {
-    return "\${" + dependencyName + "." + attribute + "}";
-};
-print(JSON.stringify(getJibProfiles(input), null, 2));

doc/building.html

@@ -70,9 +70,6 @@
 <li><a href="#make-control-variables">Make Control Variables</a></li>
 </ul></li>
 <li><a href="#running-tests">Running Tests</a></li>
-<li><a href="#signing">Signing</a><ul>
-<li><a href="#macos-1">macOS</a></li>
-</ul></li>
 <li><a href="#cross-compiling">Cross-compiling</a><ul>
 <li><a href="#cross-compiling-the-easy-way-with-openjdk-devkits">Cross compiling the easy way with OpenJDK devkits</a></li>
 <li><a href="#boot-jdk-and-build-jdk">Boot JDK and Build JDK</a></li>
@@ -166,6 +163,8 @@
 <h3 id="building-on-aarch64">Building on aarch64</h3>
 <p>At a minimum, a machine with 8 cores is advisable, as well as 8 GB of RAM. (The more cores to use, the more memory you need.) At least 6 GB of free disk space is required.</p>
 <p>If you do not have access to sufficiently powerful hardware, it is also possible to use <a href="#cross-compiling">cross-compiling</a>.</p>
+<h4 id="branch-protection">Branch Protection</h4>
+<p>In order to use Branch Protection features in the VM, <code>--enable-branch-protection</code> must be used. This option requires C++ compiler support (GCC 9.1.0+ or Clang 10+). The resulting build can be run on both machines with and without support for branch protection in hardware. Branch Protection is only supported for Linux targets.</p>
 <h3 id="building-on-32-bit-arm">Building on 32-bit arm</h3>
 <p>This is not recommended. Instead, see the section on <a href="#cross-compiling">Cross-compiling</a>.</p>
 <h2 id="operating-system-requirements">Operating System Requirements</h2>
@@ -217,7 +216,7 @@
 <p>Unfortunately, Cygwin can be unreliable in certain circumstances. If you experience build tool crashes or strange issues when building on Windows, please check the Cygwin FAQ on the <a href="https://cygwin.com/faq/faq.html#faq.using.bloda">&quot;BLODA&quot; list</a> and the section on <a href="https://cygwin.com/faq/faq.html#faq.using.fixing-fork-failures">fork() failures</a>.</p>
 <h4 id="windows-subsystem-for-linux-wsl">Windows Subsystem for Linux (WSL)</h4>
 <p>Windows 10 1809 or newer is supported due to a dependency on the wslpath utility and support for environment variable sharing through WSLENV. Version 1803 can work but intermittent build failures have been observed.</p>
-<p>It's possible to build both Windows and Linux binaries from WSL. To build Windows binaries, you must use a Windows boot JDK (located in a Windows-accessible directory). To build Linux binaries, you must use a Linux boot JDK. The default behavior is to build for Windows. To build for Linux, pass <code>--build=x86_64-unknown-linux-gnu --host=x86_64-unknown-linux-gnu</code> to <code>configure</code>.</p>
+<p>It's possible to build both Windows and Linux binaries from WSL. To build Windows binaries, you must use a Windows boot JDK (located in a Windows-accessible directory). To build Linux binaries, you must use a Linux boot JDK. The default behavior is to build for Windows. To build for Linux, pass <code>--build=x86_64-unknown-linux-gnu --openjdk-target=x86_64-unknown-linux-gnu</code> to <code>configure</code>.</p>
 <p>If building Windows binaries, the source code must be located in a Windows- accessible directory. This is because Windows executables (such as Visual Studio and the boot JDK) must be able to access the source code. Also, the drive where the source is stored must be mounted as case-insensitive by changing either /etc/fstab or /etc/wsl.conf in WSL. Individual directories may be corrected using the fsutil tool in case the source was cloned before changing the mount options.</p>
 <p>Note that while it's possible to build on WSL, testing is still not fully supported.</p>
 <h3 id="macos">macOS</h3>
@@ -240,26 +239,26 @@
 <table>
 <thead>
 <tr class="header">
-<th>Operating system</th>
-<th>Supported toolchain</th>
+<th style="text-align: left;">Operating system</th>
+<th style="text-align: left;">Supported toolchain</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
-<td>Linux</td>
-<td>gcc, clang</td>
+<td style="text-align: left;">Linux</td>
+<td style="text-align: left;">gcc, clang</td>
 </tr>
 <tr class="even">
-<td>macOS</td>
-<td>Apple Xcode (using clang)</td>
+<td style="text-align: left;">macOS</td>
+<td style="text-align: left;">Apple Xcode (using clang)</td>
 </tr>
 <tr class="odd">
-<td>AIX</td>
-<td>IBM XL C/C++</td>
+<td style="text-align: left;">AIX</td>
+<td style="text-align: left;">IBM XL C/C++</td>
 </tr>
 <tr class="even">
-<td>Windows</td>
-<td>Microsoft Visual Studio</td>
+<td style="text-align: left;">Windows</td>
+<td style="text-align: left;">Microsoft Visual Studio</td>
 </tr>
 </tbody>
 </table>
@@ -267,22 +266,22 @@
 <table>
 <thead>
 <tr class="header">
-<th>Operating system</th>
-<th>Toolchain version</th>
+<th style="text-align: left;">Operating system</th>
+<th style="text-align: left;">Toolchain version</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
-<td>Linux</td>
-<td>gcc 11.2.0</td>
+<td style="text-align: left;">Linux</td>
+<td style="text-align: left;">gcc 11.2.0</td>
 </tr>
 <tr class="even">
-<td>macOS</td>
-<td>Apple Xcode 10.1 (using clang 10.0.0)</td>
+<td style="text-align: left;">macOS</td>
+<td style="text-align: left;">Apple Xcode 10.1 (using clang 10.0.0)</td>
 </tr>
 <tr class="odd">
-<td>Windows</td>
-<td>Microsoft Visual Studio 2022 update 17.1.0</td>
+<td style="text-align: left;">Windows</td>
+<td style="text-align: left;">Microsoft Visual Studio 2022 update 17.1.0</td>
 </tr>
 </tbody>
 </table>
@@ -296,16 +295,12 @@
 <p>To use clang instead of gcc on Linux, use <code>--with-toolchain-type=clang</code>.</p>
 <h3 id="apple-xcode">Apple Xcode</h3>
 <p>The oldest supported version of Xcode is 8.</p>
-<p>You will need the Xcode command line developer tools to be able to build the JDK. (Actually, <em>only</em> the command line tools are needed, not the IDE.) The simplest way to install these is to run:</p>
+<p>You will need the Xcode command lines developers tools to be able to build the JDK. (Actually, <em>only</em> the command lines tools are needed, not the IDE.) The simplest way to install these is to run:</p>
 <pre><code>xcode-select --install</code></pre>
-<p>When updating Xcode, it is advisable to keep an older version for building the JDK. To use a specific version of Xcode you have multiple options:</p>
-<ul>
-<li>Use <code>xcode-select -s</code> before running <code>configure</code>, e.g. <code>xcode-select -s /Applications/Xcode13.1.app</code>. The drawback is that the setting is system wide and you may have to revert it after an OpenJDK build.</li>
-<li>Use configure option <code>--with-xcode-path</code>, e.g. <code>configure --with-xcode-path=/Applications/Xcode13.1.app</code> This allows using a specific Xcode version for an OpenJDK build, independently of the active Xcode version by <code>xcode-select</code>.</li>
-</ul>
+<p>It is advisable to keep an older version of Xcode for building the JDK when updating Xcode. This <a href="http://iosdevelopertips.com/xcode/install-multiple-versions-of-xcode.html">blog page</a> has good suggestions on managing multiple Xcode versions. To use a specific version of Xcode, use <code>xcode-select -s</code> before running <code>configure</code>, or use <code>--with-toolchain-path</code> to point to the version of Xcode to use, e.g. <code>configure --with-toolchain-path=/Applications/Xcode8.app/Contents/Developer/usr/bin</code></p>
 <p>If you have recently (inadvertently) updated your OS and/or Xcode version, and the JDK can no longer be built, please see the section on <a href="#problems-with-the-build-environment">Problems with the Build Environment</a>, and <a href="#getting-help">Getting Help</a> to find out if there are any recent, non-merged patches available for this update.</p>
 <h3 id="microsoft-visual-studio">Microsoft Visual Studio</h3>
-<p>The minimum accepted version of Visual Studio is 2017. Older versions will not be accepted by <code>configure</code> and will not work. The maximum accepted version of Visual Studio is 2019.</p>
+<p>For aarch64 machines running Windows the minimum accepted version is Visual Studio 2019 (16.8 or higher). For all other platforms the minimum accepted version of Visual Studio is 2017. Older versions will not be accepted by <code>configure</code> and will not work. For all platforms the maximum accepted version of Visual Studio is 2022.</p>
 <p>If you have multiple versions of Visual Studio installed, <code>configure</code> will by default pick the latest. You can request a specific version to be used by setting <code>--with-toolchain-version</code>, e.g. <code>--with-toolchain-version=2017</code>.</p>
 <p>If you have Visual Studio installed but <code>configure</code> fails to detect it, it may be because of <a href="#spaces-in-path">spaces in path</a>.</p>
 <h3 id="ibm-xl-cc">IBM XL C/C++</h3>
@@ -514,7 +509,7 @@
 </ul>
 <h2 id="running-tests">Running Tests</h2>
 <p>Most of the JDK tests are using the <a href="http://openjdk.java.net/jtreg">JTReg</a> test framework. Make sure that your configuration knows where to find your installation of JTReg. If this is not picked up automatically, use the <code>--with-jtreg=&lt;path to jtreg home&gt;</code> option to point to the JTReg framework. Note that this option should point to the JTReg home, i.e. the top directory, containing <code>lib/jtreg.jar</code> etc.</p>
-<p>The <a href="https://wiki.openjdk.java.net/display/Adoption">Adoption Group</a> provides recent builds of jtreg <a href="https://ci.adoptium.net/view/Dependencies/job/dependency_pipeline/lastSuccessfulBuild/artifact/jtreg/">here</a>. Download the latest <code>.tar.gz</code> file, unpack it, and point <code>--with-jtreg</code> to the <code>jtreg</code> directory that you just unpacked.</p>
+<p>The <a href="https://wiki.openjdk.java.net/display/Adoption">Adoption Group</a> provides recent builds of jtreg <a href="https://ci.adoptopenjdk.net/view/Dependencies/job/dependency_pipeline/lastSuccessfulBuild/artifact/jtreg/">here</a>. Download the latest <code>.tar.gz</code> file, unpack it, and point <code>--with-jtreg</code> to the <code>jtreg</code> directory that you just unpacked.</p>
 <p>Building of Hotspot Gtest suite requires the source code of Google Test framework. The top directory, which contains both <code>googletest</code> and <code>googlemock</code> directories, should be specified via <code>--with-gtest</code>. The supported version of Google Test is 1.8.1, whose source code can be obtained:</p>
 <ul>
 <li>by downloading and unpacking the source bundle from <a href="https://github.com/google/googletest/releases/tag/release-1.8.1">here</a></li>
@@ -523,12 +518,6 @@
 <p>To execute the most basic tests (tier 1), use:</p>
 <pre><code>make run-test-tier1</code></pre>
 <p>For more details on how to run tests, please see <strong>Testing the JDK</strong> (<a href="testing.html">html</a>, <a href="testing.md">markdown</a>).</p>
-<h2 id="signing">Signing</h2>
-<h3 id="macos-1">macOS</h3>
-<p>Modern versions of macOS require applications to be signed and notarizied before distribution. See Apple's documentation for more background on what this means and how it works. To help support this, the JDK build can be configured to automatically sign all native binaries, and the JDK bundle, with all the options needed for successful notarization, as well as all the entitlements required by the JDK. To enable <code>hardened</code> signing, use configure parameter <code>--with-macosx-codesign=hardened</code> and configure the signing identity you wish to use with <code>--with-macosx-codesign-identity=&lt;identity&gt;</code>. The identity refers to a signing identity from Apple that needs to be preinstalled on the build host.</p>
-<p>When not signing for distribution with the hardened option, the JDK build will still attempt to perform <code>adhoc</code> signing to add the special entitlement <code>com.apple.security.get-task-allow</code> to each binary. This entitlement is required to be able to dump core files from a process. Note that adding this entitlement makes the build invalid for notarization, so it is only added when signing in <code>debug</code> mode. To explicitly enable this kind of adhoc signing, use configure parameter <code>--with-macosx-codesign=debug</code>. It will be enabled by default in most cases.</p>
-<p>It's also possible to completely disable any explicit codesign operations done by the JDK build using the configure parameter <code>--without-macosx-codesign</code>. The exact behavior then depends on the architecture. For macOS on x64, it (at least at the time of this writing) results in completely unsigned binaries that should still work fine for development and debugging purposes. On aarch64, the Xcode linker will apply a default &quot;adhoc&quot; signing, without any entitlements. Such a build does not allow dumping core files.</p>
-<p>The default mode &quot;auto&quot; will try for <code>hardened</code> signing if the debug level is <code>release</code> and either the default identity or the specified identity is valid. If hardened isn't possible, then <code>debug</code> signing is chosen if it works. If nothing works, the codesign build step is disabled.</p>
 <h2 id="cross-compiling">Cross-compiling</h2>
 <p>Cross-compiling means using one platform (the <em>build</em> platform) to generate output that can ran on another platform (the <em>target</em> platform).</p>
 <p>The typical reason for cross-compiling is that the build is performed on a more powerful desktop computer, but the resulting binaries will be able to run on a different, typically low-performing system. Most of the complications that arise when building for embedded is due to this separation of <em>build</em> and <em>target</em> systems.</p>
@@ -581,7 +570,8 @@ x86_64-linux-gnu-to-ppc64le-linux-gnu</code></pre>
 <p>To be able to build, we need a &quot;Build JDK&quot;, which is a JDK built from the current sources (that is, the same as the end result of the entire build process), but able to run on the <em>build</em> system, and not the <em>target</em> system. (In contrast, the Boot JDK should be from an older release, e.g. JDK 8 when building JDK 9.)</p>
 <p>The build process will create a minimal Build JDK for you, as part of building. To speed up the build, you can use <code>--with-build-jdk</code> to <code>configure</code> to point to a pre-built Build JDK. Please note that the build result is unpredictable, and can possibly break in subtle ways, if the Build JDK does not <strong>exactly</strong> match the current sources.</p>
 <h3 id="specifying-the-target-platform">Specifying the Target Platform</h3>
-<p>You <em>must</em> specify the target platform when cross-compiling. Doing so will also automatically turn the build into a cross-compiling mode. The simplest way to do this is to use the <code>--openjdk-target</code> argument, e.g. <code>--openjdk-target=arm-linux-gnueabihf</code>. or <code>--openjdk-target=aarch64-oe-linux</code>. This will automatically set the <code>--build</code>, <code>--host</code> and <code>--target</code> options for autoconf, which can otherwise be confusing. (In autoconf terminology, the &quot;target&quot; is known as &quot;host&quot;, and &quot;target&quot; is used for building a Canadian cross-compiler.)</p>
+<p>You <em>must</em> specify the target platform when cross-compiling. Doing so will also automatically turn the build into a cross-compiling mode. The simplest way to do this is to use the <code>--openjdk-target</code> argument, e.g. <code>--openjdk-target=arm-linux-gnueabihf</code>. or <code>--openjdk-target=aarch64-oe-linux</code>. This will automatically set the <code>--host</code> and <code>--target</code> options for autoconf, which can otherwise be confusing. (In autoconf terminology, the &quot;target&quot; is known as &quot;host&quot;, and &quot;target&quot; is used for building a Canadian cross-compiler.)</p>
+<p>If <code>--build</code> has not been explicitly passed to configure, <code>--openjdk-target</code> will autodetect the build platform and internally set the flag automatically, otherwise the platform that was explicitly passed to <code>--build</code> will be used instead.</p>
 <h3 id="toolchain-considerations">Toolchain Considerations</h3>
 <p>You will need two copies of your toolchain, one which generates output that can run on the target system (the normal, or <em>target</em>, toolchain), and one that generates output that can run on the build system (the <em>build</em> toolchain). Note that cross-compiling is only supported for gcc at the time being. The gcc standard is to prefix cross-compiling toolchains with the target denominator. If you follow this standard, <code>configure</code> is likely to pick up the toolchain correctly.</p>
 <p>The <em>build</em> toolchain will be autodetected just the same way the normal <em>build</em>/<em>target</em> toolchain will be autodetected when not cross-compiling. If this is not what you want, or if the autodetection fails, you can specify a devkit containing the <em>build</em> toolchain using <code>--with-build-devkit</code> to <code>configure</code>, or by giving <code>BUILD_CC</code> and <code>BUILD_CXX</code> arguments.</p>
@@ -900,30 +890,28 @@ spawn failed</code></pre>
 <p>If you need general help or advice about developing for the JDK, you can also contact the Adoption Group. See the section on <a href="#contributing-to-openjdk">Contributing to OpenJDK</a> for more information.</p>
 <h2 id="reproducible-builds">Reproducible Builds</h2>
 <p>Build reproducibility is the property of getting exactly the same bits out when building, every time, independent on who builds the product, or where. This is for many reasons a harder goal than it initially appears, but it is an important goal, for security reasons and others. Please see <a href="https://reproducible-builds.org">Reproducible Builds</a> for more information about the background and reasons for reproducible builds.</p>
-<p>Currently, it is not possible to build OpenJDK fully reproducibly, but getting there is an ongoing effort. There are some things you can do to minimize non-determinism and make a larger part of the build reproducible:</p>
+<p>Currently, it is not possible to build OpenJDK fully reproducibly, but getting there is an ongoing effort.</p>
+<p>An absolute prerequisite for building reproducible is to speficy a fixed build time, since time stamps are embedded in many file formats. This is done by setting the <code>SOURCE_DATE_EPOCH</code> environment variable, which is an <a href="https://reproducible-builds.org/docs/source-date-epoch/">industry standard</a>, that many tools, such as gcc, recognize, and use in place of the current time when generating output.</p>
+<p>To generate reproducible builds, you must set <code>SOURCE_DATE_EPOCH</code> before running <code>configure</code>. The value in <code>SOURCE_DATE_EPOCH</code> will be stored in the configuration, and used by <code>make</code>. Setting <code>SOURCE_DATE_EPOCH</code> before running <code>make</code> will have no effect on the build.</p>
+<p>You must also make sure your build does not rely on <code>configure</code>'s default adhoc version strings. Default adhoc version strings <code>OPT</code> segment include user name and source directory. You can either override just the <code>OPT</code> segment using <code>--with-version-opt=&lt;any fixed string&gt;</code>, or you can specify the entire version string using <code>--with-version-string=&lt;your version&gt;</code>.</p>
+<p>This is a typical example of how to build the JDK in a reproducible way:</p>
+<pre><code>export SOURCE_DATE_EPOCH=946684800
+bash configure --with-version-opt=adhoc
+make</code></pre>
+<p>Note that regardless if you specify a source date for <code>configure</code> or not, the JDK build system will set <code>SOURCE_DATE_EPOCH</code> for all build tools when building. If <code>--with-source-date</code> has the value <code>updated</code> (which is the default unless <code>SOURCE_DATE_EPOCH</code> is found by in the environment by <code>configure</code>), the source date value will be determined at build time.</p>
+<p>There are several aspects of reproducible builds that can be individually adjusted by <code>configure</code> arguments. If any of these are given, they will override the value derived from <code>SOURCE_DATE_EPOCH</code>. These arguments are:</p>
 <ul>
-<li>Turn on build system support for reproducible builds</li>
+<li><p><code>--with-source-date</code></p>
+<p>This option controls how the JDK build sets <code>SOURCE_DATE_EPOCH</code> when building. It can be set to a value describing a date, either an epoch based timestamp as an integer, or a valid ISO-8601 date.</p>
+<p>It can also be set to one of the special values <code>current</code>, <code>updated</code> or <code>version</code>. <code>current</code> means that the time of running <code>configure</code> will be used. <code>version</code> will use the nominal release date for the current JDK version. <code>updated</code>, which means that <code>SOURCE_DATE_EPOCH</code> will be set to the current time each time you are running <code>make</code>. All choices, except for <code>updated</code>, will set a fixed value for the source date timestamp.</p>
+<p>When <code>SOURCE_DATE_EPOCH</code> is set, the default value for <code>--with-source-date</code> will be the value given by <code>SOURCE_DATE_EPOCH</code>. Otherwise, the default value is <code>updated</code>.</p></li>
+<li><p><code>--with-hotspot-build-time</code></p>
+<p>This option controls the build time string that will be included in the hotspot library (<code>libjvm.so</code> or <code>jvm.dll</code>). When the source date is fixed (e.g. by setting <code>SOURCE_DATE_EPOCH</code>), the default value for <code>--with-hotspot-build-time</code> will be an ISO 8601 representation of that time stamp. Otherwise the default value will be the current time when building hotspot.</p></li>
+<li><p><code>--with-copyright-year</code></p>
+<p>This option controls the copyright year in some generated text files. When the source date is fixed (e.g. by setting <code>SOURCE_DATE_EPOCH</code>), the default value for <code>--with-copyright-year</code> will be the year of that time stamp. Otherwise the default is the current year at the time of running configure. This can be overridden by <code>--with-copyright-year=&lt;year&gt;</code>.</p></li>
+<li><p><code>--enable-reproducible-build</code></p>
+<p>This option controls some additional behavior needed to make the build reproducible. When the source date is fixed (e.g. by setting <code>SOURCE_DATE_EPOCH</code>), this flag will be turned on by default. Otherwise, the value is determined by heuristics. If it is explicitly turned off, the build might not be reproducible.</p></li>
 </ul>
-<p>Add the flag <code>--enable-reproducible-build</code> to your <code>configure</code> command line. This will turn on support for reproducible builds where it could otherwise be lacking.</p>
-<ul>
-<li>Do not rely on <code>configure</code>'s default adhoc version strings</li>
-</ul>
-<p>Default adhoc version strings OPT segment include user name, source directory and timestamp. You can either override just the OPT segment using <code>--with-version-opt=&lt;any fixed string&gt;</code>, or you can specify the entire version string using <code>--with-version-string=&lt;your version&gt;</code>.</p>
-<ul>
-<li>Specify how the build sets <code>SOURCE_DATE_EPOCH</code></li>
-</ul>
-<p>The JDK build system will set the <code>SOURCE_DATE_EPOCH</code> environment variable during building, depending on the value of the <code>--with-source-date</code> option for <code>configure</code>. The default value is <code>updated</code>, which means that <code>SOURCE_DATE_EPOCH</code> will be set to the current time each time you are running <code>make</code>.</p>
-<p>The <a href="https://reproducible-builds.org/docs/source-date-epoch/"><code>SOURCE_DATE_EPOCH</code> environment variable</a> is an industry standard, that many tools, such as gcc, recognize, and use in place of the current time when generating output.</p>
-<p>For reproducible builds, you need to set this to a fixed value. You can use the special value <code>version</code> which will use the nominal release date for the current JDK version, or a value describing a date, either an epoch based timestamp as an integer, or a valid ISO-8601 date.</p>
-<p><strong>Hint:</strong> If your build environment already sets <code>SOURCE_DATE_EPOCH</code>, you can propagate this using <code>--with-source-date=$SOURCE_DATE_EPOCH</code>.</p>
-<ul>
-<li>Specify a hotspot build time</li>
-</ul>
-<p>Set a fixed hotspot build time. This will be included in the hotspot library (<code>libjvm.so</code> or <code>jvm.dll</code>) and defaults to the current time when building hotspot. Use <code>--with-hotspot-build-time=&lt;any fixed string&gt;</code> for reproducible builds. It's a string so you don't need to format it specifically, so e.g. <code>n/a</code> will do. Another solution is to use the <code>SOURCE_DATE_EPOCH</code> variable, e.g. <code>--with-hotspot-build-time=$(date --date=@$SOURCE_DATE_EPOCH)</code>.</p>
-<ul>
-<li>Copyright year</li>
-</ul>
-<p>The copyright year in some generated text files are normally set to the current year. This can be overridden by <code>--with-copyright-year=&lt;year&gt;</code>. For fully reproducible builds, this needs to be set to a fixed value.</p>
 <h2 id="hints-and-suggestions-for-advanced-users">Hints and Suggestions for Advanced Users</h2>
 <h3 id="bash-completion">Bash Completion</h3>
 <p>The <code>configure</code> and <code>make</code> commands tries to play nice with bash command-line completion (using <code>&lt;tab&gt;</code> or <code>&lt;tab&gt;&lt;tab&gt;</code>). To use this functionality, make sure you enable completion in your <code>~/.bashrc</code> (see instructions for bash in your operating system).</p>

doc/building.md

@@ -135,6 +135,14 @@ space is required.
 If you do not have access to sufficiently powerful hardware, it is also
 possible to use [cross-compiling](#cross-compiling).
 
+#### Branch Protection
+
+In order to use Branch Protection features in the VM, `--enable-branch-protection`
+must be used. This option requires C++ compiler support (GCC 9.1.0+ or Clang
+10+). The resulting build can be run on both machines with and without support
+for branch protection in hardware. Branch Protection is only supported for
+Linux targets.
+
 ### Building on 32-bit arm
 
 This is not recommended. Instead, see the section on [Cross-compiling](
@@ -236,8 +244,8 @@ It's possible to build both Windows and Linux binaries from WSL. To build
 Windows binaries, you must use a Windows boot JDK (located in a
 Windows-accessible directory). To build Linux binaries, you must use a Linux
 boot JDK. The default behavior is to build for Windows. To build for Linux, pass
-`--build=x86_64-unknown-linux-gnu --host=x86_64-unknown-linux-gnu` to
-`configure`.
+`--build=x86_64-unknown-linux-gnu --openjdk-target=x86_64-unknown-linux-gnu`
+to `configure`.
 
 If building Windows binaries, the source code must be located in a Windows-
 accessible directory. This is because Windows executables (such as Visual Studio
@@ -305,12 +313,12 @@ be able to run on the target platform. In theory, toolchain and operating
 system should be independent factors, but in practice there's more or less a
 one-to-one correlation between target operating system and toolchain.
 
-| Operating system   | Supported toolchain       |
-| ------------------ | ------------------------- |
-| Linux              | gcc, clang                |
-| macOS              | Apple Xcode (using clang) |
-| AIX                | IBM XL C/C++              |
-| Windows            | Microsoft Visual Studio   |
+ Operating system   Supported toolchain
+ ------------------ -------------------------
+ Linux              gcc, clang
+ macOS              Apple Xcode (using clang)
+ AIX                IBM XL C/C++
+ Windows            Microsoft Visual Studio
 
 Please see the individual sections on the toolchains for version
 recommendations. As a reference, these versions of the toolchains are used, at
@@ -319,11 +327,11 @@ possible to compile the JDK with both older and newer versions, but the closer
 you stay to this list, the more likely you are to compile successfully without
 issues.
 
-| Operating system   | Toolchain version                          |
-| ------------------ | ------------------------------------------ |
-| Linux              | gcc 11.2.0                                 |
-| macOS              | Apple Xcode 10.1 (using clang 10.0.0)      |
-| Windows            | Microsoft Visual Studio 2022 update 17.1.0 |
+ Operating system   Toolchain version
+ ------------------ -------------------------------------------------------
+ Linux              gcc 11.2.0
+ macOS              Apple Xcode 10.1 (using clang 10.0.0)
+ Windows            Microsoft Visual Studio 2022 update 17.1.0
 
 All compilers are expected to be able to compile to the C99 language standard,
 as some C99 features are used in the source code. Microsoft Visual Studio
@@ -351,20 +359,20 @@ To use clang instead of gcc on Linux, use `--with-toolchain-type=clang`.
 
 The oldest supported version of Xcode is 8.
 
-You will need the Xcode command line developer tools to be able to build
-the JDK. (Actually, *only* the command line tools are needed, not the IDE.)
+You will need the Xcode command lines developers tools to be able to build
+the JDK. (Actually, *only* the command lines tools are needed, not the IDE.)
 The simplest way to install these is to run:
 ```
 xcode-select --install
 ```
 
-When updating Xcode, it is advisable to keep an older version for building the JDK.
-To use a specific version of Xcode you have multiple options:
-
-  * Use `xcode-select -s` before running `configure`, e.g. `xcode-select -s /Applications/Xcode13.1.app`. The drawback is that the setting
-    is system wide and you may have to revert it after an OpenJDK build.
-  * Use configure option `--with-xcode-path`, e.g. `configure --with-xcode-path=/Applications/Xcode13.1.app`
-    This allows using a specific Xcode version for an OpenJDK build, independently of the active Xcode version by `xcode-select`.
+It is advisable to keep an older version of Xcode for building the JDK when
+updating Xcode. This [blog page](
+http://iosdevelopertips.com/xcode/install-multiple-versions-of-xcode.html) has
+good suggestions on managing multiple Xcode versions. To use a specific version
+of Xcode, use `xcode-select -s` before running `configure`, or use
+`--with-toolchain-path` to point to the version of Xcode to use, e.g.
+`configure --with-toolchain-path=/Applications/Xcode8.app/Contents/Developer/usr/bin`
 
 If you have recently (inadvertently) updated your OS and/or Xcode version, and
 the JDK can no longer be built, please see the section on [Problems with the
@@ -374,9 +382,10 @@ available for this update.
 
 ### Microsoft Visual Studio
 
-The minimum accepted version of Visual Studio is 2017. Older versions will not
-be accepted by `configure` and will not work. The maximum accepted
-version of Visual Studio is 2019.
+For aarch64 machines running Windows the minimum accepted version is Visual Studio 2019
+(16.8 or higher). For all other platforms the minimum accepted version of
+Visual Studio is 2017. Older versions will not be accepted by `configure` and will
+not work. For all platforms the maximum accepted version of Visual Studio is 2022.
 
 If you have multiple versions of Visual Studio installed, `configure` will by
 default pick the latest. You can request a specific version to be used by
@@ -848,7 +857,7 @@ containing `lib/jtreg.jar` etc.
 
 The [Adoption Group](https://wiki.openjdk.java.net/display/Adoption) provides
 recent builds of jtreg [here](
-https://ci.adoptium.net/view/Dependencies/job/dependency_pipeline/lastSuccessfulBuild/artifact/jtreg/).
+https://ci.adoptopenjdk.net/view/Dependencies/job/dependency_pipeline/lastSuccessfulBuild/artifact/jtreg/).
 Download the latest `.tar.gz` file, unpack it, and point `--with-jtreg` to the
 `jtreg` directory that you just unpacked.
 
@@ -868,42 +877,6 @@ make run-test-tier1
 For more details on how to run tests, please see **Testing the JDK**
 ([html](testing.html), [markdown](testing.md)).
 
-## Signing
-
-### macOS
-
-Modern versions of macOS require applications to be signed and notarizied before
-distribution. See Apple's documentation for more background on what this means
-and how it works. To help support this, the JDK build can be configured to
-automatically sign all native binaries, and the JDK bundle, with all the options
-needed for successful notarization, as well as all the entitlements required by
-the JDK. To enable `hardened` signing, use configure parameter
-`--with-macosx-codesign=hardened` and configure the signing identity you wish to
-use with `--with-macosx-codesign-identity=<identity>`. The identity refers to a
-signing identity from Apple that needs to be preinstalled on the build host.
-
-When not signing for distribution with the hardened option, the JDK build will
-still attempt to perform `adhoc` signing to add the special entitlement
-`com.apple.security.get-task-allow` to each binary. This entitlement is required
-to be able to dump core files from a process. Note that adding this entitlement
-makes the build invalid for notarization, so it is only added when signing in
-`debug` mode. To explicitly enable this kind of adhoc signing, use configure
-parameter `--with-macosx-codesign=debug`. It will be enabled by default in most
-cases.
-
-It's also possible to completely disable any explicit codesign operations done
-by the JDK build using the configure parameter `--without-macosx-codesign`.
-The exact behavior then depends on the architecture. For macOS on x64, it (at
-least at the time of this writing) results in completely unsigned binaries that
-should still work fine for development and debugging purposes. On aarch64, the
-Xcode linker will apply a default "adhoc" signing, without any entitlements.
-Such a build does not allow dumping core files.
-
-The default mode "auto" will try for `hardened` signing if the debug level is
-`release` and either the default identity or the specified identity is valid.
-If hardened isn't possible, then `debug` signing is chosen if it works. If
-nothing works, the codesign build step is disabled.
-
 ## Cross-compiling
 
 Cross-compiling means using one platform (the *build* platform) to generate
@@ -1013,11 +986,16 @@ You *must* specify the target platform when cross-compiling. Doing so will also
 automatically turn the build into a cross-compiling mode. The simplest way to
 do this is to use the `--openjdk-target` argument, e.g.
 `--openjdk-target=arm-linux-gnueabihf`. or `--openjdk-target=aarch64-oe-linux`.
-This will automatically set the `--build`, `--host` and `--target` options for
+This will automatically set the `--host` and `--target` options for
 autoconf, which can otherwise be confusing. (In autoconf terminology, the
 "target" is known as "host", and "target" is used for building a Canadian
 cross-compiler.)
 
+If `--build` has not been explicitly passed to configure, `--openjdk-target`
+will autodetect the build platform and internally set the flag automatically,
+otherwise the platform that was explicitly passed to `--build` will be used
+instead.
+
 ### Toolchain Considerations
 
 You will need two copies of your toolchain, one which generates output that can
@@ -1549,57 +1527,85 @@ https://reproducible-builds.org) for more information about the background and
 reasons for reproducible builds.
 
 Currently, it is not possible to build OpenJDK fully reproducibly, but getting
-there is an ongoing effort. There are some things you can do to minimize
-non-determinism and make a larger part of the build reproducible:
+there is an ongoing effort.
 
-  * Turn on build system support for reproducible builds
+An absolute prerequisite for building reproducible is to speficy a fixed build
+time, since time stamps are embedded in many file formats. This is done by
+setting the `SOURCE_DATE_EPOCH` environment variable, which is an [industry
+standard]( https://reproducible-builds.org/docs/source-date-epoch/), that many
+tools, such as gcc, recognize, and use in place of the current time when
+generating output.
 
-Add the flag `--enable-reproducible-build` to your `configure` command line.
-This will turn on support for reproducible builds where it could otherwise be
-lacking.
+To generate reproducible builds, you must set `SOURCE_DATE_EPOCH` before running
+`configure`. The value in `SOURCE_DATE_EPOCH` will be stored in the
+configuration, and used by `make`. Setting `SOURCE_DATE_EPOCH` before running
+`make` will have no effect on the build.
 
-  * Do not rely on `configure`'s default adhoc version strings
-
-Default adhoc version strings OPT segment include user name, source directory
-and timestamp. You can either override just the OPT segment using
+You must also make sure your build does not rely on `configure`'s default adhoc
+version strings. Default adhoc version strings `OPT` segment include user name
+and source directory. You can either override just the `OPT` segment using
 `--with-version-opt=<any fixed string>`, or you can specify the entire version
 string using `--with-version-string=<your version>`.
 
-  * Specify how the build sets `SOURCE_DATE_EPOCH`
+This is a typical example of how to build the JDK in a reproducible way:
 
-The JDK build system will set the `SOURCE_DATE_EPOCH` environment variable
-during building, depending on the value of the `--with-source-date` option for
-`configure`. The default value is `updated`, which means that
-`SOURCE_DATE_EPOCH` will be set to the current time each time you are running
-`make`.
+```
+export SOURCE_DATE_EPOCH=946684800
+bash configure --with-version-opt=adhoc
+make
+```
 
-The [`SOURCE_DATE_EPOCH` environment variable](
-https://reproducible-builds.org/docs/source-date-epoch/) is an industry
-standard, that many tools, such as gcc, recognize, and use in place of the
-current time when generating output.
+Note that regardless if you specify a source date for `configure` or not, the
+JDK build system will set `SOURCE_DATE_EPOCH` for all build tools when building.
+If `--with-source-date` has the value `updated` (which is the default unless
+`SOURCE_DATE_EPOCH` is found by in the environment by `configure`), the source
+date value will be determined at build time.
 
-For reproducible builds, you need to set this to a fixed value. You can use the
-special value `version` which will use the nominal release date for the current
-JDK version, or a value describing a date, either an epoch based timestamp as an
-integer, or a valid ISO-8601 date.
+There are several aspects of reproducible builds that can be individually
+adjusted by `configure` arguments. If any of these are given, they will override
+the value derived from `SOURCE_DATE_EPOCH`. These arguments are:
 
-**Hint:** If your build environment already sets `SOURCE_DATE_EPOCH`, you can
-propagate this using `--with-source-date=$SOURCE_DATE_EPOCH`.
+ * `--with-source-date`
 
-  * Specify a hotspot build time
+    This option controls how the JDK build sets `SOURCE_DATE_EPOCH` when
+    building. It can be set to a value describing a date, either an epoch based
+    timestamp as an integer, or a valid ISO-8601 date.
 
-Set a fixed hotspot build time. This will be included in the hotspot library
-(`libjvm.so` or `jvm.dll`) and defaults to the current time when building
-hotspot. Use `--with-hotspot-build-time=<any fixed string>` for reproducible
-builds. It's a string so you don't need to format it specifically, so e.g. `n/a`
-will do. Another solution is to use the `SOURCE_DATE_EPOCH` variable, e.g.
-`--with-hotspot-build-time=$(date --date=@$SOURCE_DATE_EPOCH)`.
+    It can also be set to one of the special values `current`, `updated` or
+    `version`. `current` means that the time of running `configure` will be
+    used. `version` will use the nominal release date for the current JDK
+    version. `updated`, which means that `SOURCE_DATE_EPOCH` will be set to the
+    current time each time you are running `make`. All choices, except for
+    `updated`, will set a fixed value for the source date timestamp.
 
-  * Copyright year
+    When `SOURCE_DATE_EPOCH` is set, the default value for `--with-source-date`
+    will be the value given by `SOURCE_DATE_EPOCH`. Otherwise, the default value
+    is `updated`.
 
-The copyright year in some generated text files are normally set to the current
-year. This can be overridden by `--with-copyright-year=<year>`. For fully
-reproducible builds, this needs to be set to a fixed value.
+ * `--with-hotspot-build-time`
+
+    This option controls the build time string that will be included in the
+    hotspot library (`libjvm.so` or `jvm.dll`). When the source date is fixed
+    (e.g. by setting `SOURCE_DATE_EPOCH`), the default value for
+    `--with-hotspot-build-time` will be an ISO 8601 representation of that time
+    stamp. Otherwise the default value will be the current time when building
+    hotspot.
+
+ * `--with-copyright-year`
+
+    This option controls the copyright year in some generated text files. When
+    the source date is fixed (e.g. by setting `SOURCE_DATE_EPOCH`), the default
+    value for `--with-copyright-year` will be the year of that time stamp.
+    Otherwise the default is the current year at the time of running configure.
+    This can be overridden by `--with-copyright-year=<year>`.
+
+ * `--enable-reproducible-build`
+
+    This option controls some additional behavior needed to make the build
+    reproducible. When the source date is fixed (e.g. by setting
+    `SOURCE_DATE_EPOCH`), this flag will be turned on by default. Otherwise, the
+    value is determined by heuristics. If it is explicitly turned off, the build
+    might not be reproducible.
 
 ## Hints and Suggestions for Advanced Users
 

doc/hotspot-style.html

@@ -50,6 +50,8 @@
 <li><a href="#nullptr">nullptr</a></li>
 <li><a href="#atomic">&lt;atomic&gt;</a></li>
 <li><a href="#uniform-initialization">Uniform Initialization</a></li>
+<li><a href="#local-function-objects">Local Function Objects</a></li>
+<li><a href="#inheriting-constructors">Inheriting constructors</a></li>
 <li><a href="#additional-permitted-features">Additional Permitted Features</a></li>
 <li><a href="#excluded-features">Excluded Features</a></li>
 <li><a href="#undecided-features">Undecided Features</a></li>
@@ -66,7 +68,9 @@
 <h3 id="counterexamples-and-updates">Counterexamples and Updates</h3>
 <p>Many of the guidelines mentioned here have (sometimes widespread) counterexamples in the HotSpot code base. Finding a counterexample is not sufficient justification for new code to follow the counterexample as a precedent, since readers of your code will rightfully expect your code to follow the greater bulk of precedents documented here.</p>
 <p>Occasionally a guideline mentioned here may be just out of synch with the actual HotSpot code base. If you find that a guideline is consistently contradicted by a large number of counterexamples, please bring it up for discussion and possible change. The architectural rule, of course, is &quot;When in Rome do as the Romans&quot;. Sometimes in the suburbs of Rome the rules are a little different; these differences can be pointed out here.</p>
-<p>Proposed changes should be discussed on the <a href="mailto:hotspot-dev@openjdk.java.net">HotSpot Developers</a> mailing list, and approved by <a href="https://en.wikipedia.org/wiki/Rough_consensus">rough consensus</a> of the <a href="https://openjdk.java.net/census#hotspot">HotSpot Group</a> Members. The Group Lead determines whether consensus has been reached. Changes are likely to be cautious and incremental, since HotSpot coders have been using these guidelines for years.</p>
+<p>Proposed changes should be discussed on the <a href="mailto:hotspot-dev@openjdk.java.net">HotSpot Developers</a> mailing list. Changes are likely to be cautious and incremental, since HotSpot coders have been using these guidelines for years.</p>
+<p>Substantive changes are approved by <a href="https://www.rfc-editor.org/rfc/rfc7282.html">rough consensus</a> of the <a href="https://openjdk.java.net/census#hotspot">HotSpot Group</a> Members. The Group Lead determines whether consensus has been reached.</p>
+<p>Editorial changes (changes that only affect the description of HotSpot style, not its substance) do not require the full consensus gathering process. The normal HotSpot pull request process may be used for editorial changes, with the additional requirement that the requisite reviewers are also HotSpot Group Members.</p>
 <h2 id="structure-and-formatting">Structure and Formatting</h2>
 <h3 id="factoring-and-class-design">Factoring and Class Design</h3>
 <ul>
@@ -150,7 +154,7 @@
 <h3 id="whitespace">Whitespace</h3>
 <ul>
 <li><p>In general, don't change whitespace unless it improves readability or consistency. Gratuitous whitespace changes will make integrations and backports more difficult.</p></li>
-<li><p>Use One-True-Brace-Style. The opening brace for a function or class is normally at the end of the line; it is sometimes moved to the beginning of the next line for emphasis. Substatements are enclosed in braces, even if there is only a single statement. Extremely simple one-line statements may drop braces around a substatement.</p></li>
+<li><p>Use <a href="https://en.wikipedia.org/wiki/Indentation_style#Variant:_1TBS_(OTBS)">One-True-Brace-Style</a>. The opening brace for a function or class is normally at the end of the line; it is sometimes moved to the beginning of the next line for emphasis. Substatements are enclosed in braces, even if there is only a single statement. Extremely simple one-line statements may drop braces around a substatement.</p></li>
 <li><p>Indentation levels are two columns.</p></li>
 <li><p>There is no hard line length limit. That said, bear in mind that excessively long lines can cause difficulties. Some people like to have multiple side-by-side windows in their editors, and long lines may force them to choose among unpleasant options. They can use wide windows, reducing the number that can fit across the screen, and wasting a lot of screen real estate because most lines are not that long. Alternatively, they can have more windows across the screen, with long lines wrapping (or worse, requiring scrolling to see in their entirety), which is harder to read. Similar issues exist for side-by-side code reviews.</p></li>
 <li><p>Tabs are not allowed in code. Set your editor accordingly.<br> (Emacs: <code>(setq-default indent-tabs-mode nil)</code>.)</p></li>
@@ -194,7 +198,7 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <p>Similar discussions for some other projects:</p>
 <ul>
 <li><p><a href="https://google.github.io/styleguide/cppguide.html">Google C++ Style Guide</a> — Currently (2020) targeting C++17.</p></li>
-<li><p><a href="https://chromium-cpp.appspot.com">C++11 and C++14 use in Chromium</a> — Categorizes features as allowed, banned, or to be discussed.</p></li>
+<li><p><a href="https://chromium.googlesource.com/chromium/src/+/main/styleguide/c++/c++-features.md">C++11 and C++14 use in Chromium</a> — Categorizes features as allowed, banned, or to be discussed.</p></li>
 <li><p><a href="https://llvm.org/docs/CodingStandards.html">llvm Coding Standards</a> — Currently (2020) targeting C++14.</p></li>
 <li><p><a href="https://firefox-source-docs.mozilla.org/code-quality/coding-style/using_cxx_in_firefox_code.html">Using C++ in Mozilla code</a> — C++17 support is required for recent versions (2020).</p></li>
 </ul>
@@ -207,7 +211,7 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <p>Rationale: Other than to implement exceptions (which HotSpot doesn't use), most potential uses of <a href="https://en.wikipedia.org/wiki/Run-time_type_information" title="Runtime Type Information">RTTI</a> are better done via virtual functions. Some of the remainder can be replaced by bespoke mechanisms. The cost of the additional runtime data structures needed to support <a href="https://en.wikipedia.org/wiki/Run-time_type_information" title="Runtime Type Information">RTTI</a> are deemed not worthwhile, given the alternatives.</p>
 <h3 id="memory-allocation">Memory Allocation</h3>
 <p>Do not use the standard global allocation and deallocation functions (operator new and related functions). Use of these functions by HotSpot code is disabled for some platforms.</p>
-<p>Rationale: HotSpot often uses &quot;resource&quot; or &quot;arena&quot; allocation. Even where heap allocation is used, the standard global functions are avoided in favor of wrappers around malloc and free that support the VM's Native Memory Tracking (NMT) feature.</p>
+<p>Rationale: HotSpot often uses &quot;resource&quot; or &quot;arena&quot; allocation. Even where heap allocation is used, the standard global functions are avoided in favor of wrappers around malloc and free that support the VM's Native Memory Tracking (NMT) feature. Typically, uses of the global operator new are inadvertent and therefore often associated with memory leaks.</p>
 <p>Native memory allocation failures are often treated as non-recoverable. The place where &quot;out of memory&quot; is (first) detected may be an innocent bystander, unrelated to the actual culprit.</p>
 <h3 id="class-inheritance">Class Inheritance</h3>
 <p>Use public single inheritance.</p>
@@ -254,8 +258,7 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <li><p>Function argument deduction. This is always permitted, and indeed encouraged. It is nearly always better to allow the type of a function template argument to be deduced rather than explicitly specified.</p></li>
 <li><p><code>auto</code> variable declarations (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1984.pdf">n1984</a>)<br> For local variables, this can be used to make the code clearer by eliminating type information that is obvious or irrelevant. Excessive use can make code much harder to understand.</p></li>
 <li><p>Function return type deduction (<a href="https://isocpp.org/files/papers/N3638.html">n3638</a>)<br> Only use if the function body has a very small number of <code>return</code> statements, and generally relatively little other code.</p></li>
-<li><p>Generic lambdas. Lambdas are not (yet) permitted.</p></li>
-<li><p>Lambda init captures. Lambdas are not (yet) permitted.</p></li>
+<li><p>Also see <a href="#lambdaexpressions">lambda expressions</a>.</p></li>
 </ul>
 <h3 id="expression-sfinae">Expression SFINAE</h3>
 <p><a href="https://en.cppreference.com/w/cpp/language/sfinae" title="Substitution Failure Is Not An Error">Substitution Failure Is Not An Error</a> (SFINAE) is a template metaprogramming technique that makes use of template parameter substitution failures to make compile-time decisions.</p>
@@ -268,8 +271,8 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <p>The underlying type of a <em>scoped-enum</em> should also be specified explicitly if conversions may be applied to values of that type.</p>
 <p>Due to bugs in certain (very old) compilers, there is widespread use of enums and avoidance of in-class initialization of static integral constant members. Compilers having such bugs are no longer supported. Except where an enum is semantically appropriate, new code should use integral constants.</p>
 <h3 id="thread_local">thread_local</h3>
-<p>Do not use <code>thread_local</code> (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2659.htm">n2659</a>); instead, use the HotSpot macro <code>THREAD_LOCAL</code>. The initializer must be a constant expression.</p>
-<p>As was discussed in the review for <a href="https://mail.openjdk.java.net/pipermail/hotspot-dev/2019-September/039487.html">JDK-8230877</a>, <code>thread_local</code> allows dynamic initialization and destruction semantics. However, that support requires a run-time penalty for references to non-function-local <code>thread_local</code> variables defined in a different translation unit, even if they don't need dynamic initialization. Dynamic initialization and destruction of namespace-scoped thread local variables also has the same ordering problems as for ordinary namespace-scoped variables.</p>
+<p>Avoid use of <code>thread_local</code> (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2659.htm">n2659</a>); and instead, use the HotSpot macro <code>THREAD_LOCAL</code>, for which the initializer must be a constant expression. When <code>thread_local</code> must be used, use the Hotspot macro <code>APPROVED_CPP_THREAD_LOCAL</code> to indicate that the use has been given appropriate consideration.</p>
+<p>As was discussed in the review for <a href="https://mail.openjdk.java.net/pipermail/hotspot-dev/2019-September/039487.html">JDK-8230877</a>, <code>thread_local</code> allows dynamic initialization and destruction semantics. However, that support requires a run-time penalty for references to non-function-local <code>thread_local</code> variables defined in a different translation unit, even if they don't need dynamic initialization. Dynamic initialization and destruction of non-local <code>thread_local</code> variables also has the same ordering problems as for ordinary non-local variables. So we avoid use of <code>thread_local</code> in general, limiting its use to only those cases where dynamic initialization or destruction are essential. See <a href="https://bugs.openjdk.java.net/browse/JDK-8282469">JDK-8282469</a> for further discussion.</p>
 <h3 id="nullptr">nullptr</h3>
 <p>Prefer <code>nullptr</code> (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf">n2431</a>) to <code>NULL</code>. Don't use (constexpr or literal) 0 for pointers.</p>
 <p>For historical reasons there are widespread uses of both <code>NULL</code> and of integer 0 as a pointer value.</p>
@@ -288,6 +291,125 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <li><a href="https://en.cppreference.com/w/cpp/language/aggregate_initialization">aggregate initialization</a></li>
 </ul>
 <p>Although related, the use of <code>std::initializer_list</code> remains forbidden, as part of the avoidance of the C++ Standard Library in HotSpot code.</p>
+<h3 id="local-function-objects">Local Function Objects</h3>
+<ul>
+<li>Local function objects, including lambda expressions, may be used.</li>
+<li>Lambda expressions must only be used as a downward value.</li>
+<li>Prefer <code>[&amp;]</code> as the capture list of a lambda expression.</li>
+<li>Return type deduction for lambda expressions is permitted, and indeed encouraged.</li>
+<li>An empty parameter list for a lambda expression may be elided.</li>
+<li>A lambda expression must not be <code>mutable</code>.</li>
+<li>Generic lambda expressions are permitted.</li>
+<li>Lambda expressions should be relatively simple.</li>
+<li>Anonymous lambda expressions should not overly clutter the enclosing expression.</li>
+<li>An anonymous lambda expression must not be directly invoked.</li>
+<li>Bind expressions are forbidden.</li>
+</ul>
+<p>Single-use function objects can be defined locally within a function, directly at the point of use. This is an alternative to having a function or function object class defined at class or namespace scope.</p>
+<p>This usage was somewhat limited by C++03, which does not permit such a class to be used as a template parameter. That restriction was removed by C++11 (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm">n2657</a>). Use of this feature is permitted.</p>
+<p>Many HotSpot protocols involve &quot;function-like&quot; objects that involve some named member function rather than a call operator. For example, a function that performs some action on all threads might be written as</p>
+<pre><code>void do_something() {
+  struct DoSomething : public ThreadClosure {
+    virtual void do_thread(Thread* t) {
+      ... do something with t ...
+    }
+  } closure;
+  Threads::threads_do(&amp;closure);
+}</code></pre>
+<p>HotSpot code has historically usually placed the DoSomething class at namespace (or sometimes class) scope. This separates the function's code from its use, often to the detriment of readability. It requires giving the class a globally unique name (if at namespace scope). It also loses the information that the class is intended for use in exactly one place, and does not have any subclasses. (However, the latter can now be indicated by declaring it <code>final</code>.) Often, for simplicity, a local class will skip things like access control and accessor functions, giving the enclosing function direct access to the implementation and eliminating some boilerplate that might be provided if the class is in some outer (more accessible) scope. On the other hand, if there is a lot of surrounding code in the function body or the local class is of significant size, defining it locally can increase clutter and reduce readability.</p>
+<p><a name="lambdaexpressions"></a> C++11 added <em>lambda expressions</em> as a new way to write a function object. Simple lambda expressions can be significantly more concise than a function object, eliminating a lot of boiler-plate. On the other hand, a complex lambda expression may not provide much, if any, readability benefit compared to an ordinary function object. Also, while a lambda can encapsulate a call to a &quot;function-like&quot; object, it cannot be used in place of such.</p>
+<p>A common use for local functions is as one-use <a href="https://en.cppreference.com/w/cpp/language/raii" title="Resource Acquisition Is Initialization">RAII</a> objects. The amount of boilerplate for a function object class (local or not) makes such usage somewhat clumsy and verbose. But with the help of a small amount of supporting utility code, lambdas work particularly well for this use case.</p>
+<p>Another use for local functions is <a href="https://en.wikipedia.org/wiki/Partial_application" title="Partial Application">partial application</a>. Again here, lambdas are typically much simpler and less verbose than function object classes.</p>
+<p>Because of these benefits, lambda expressions are permitted in HotSpot code, with some restrictions and usage guidance. An anonymous lambda is one which is passed directly as an argument. A named lambda is the value of a variable, which is its name.</p>
+<p>Lambda expressions should only be passed downward. In particular, a lambda should not be returned from a function or stored in a global variable, whether directly or as the value of a member of some other object. Lambda capture is syntactically subtle (by design), and propagating a lambda in such ways can easily pass references to captured values to places where they are no longer valid. In particular, members of the enclosing <code>this</code> object are effectively captured by reference, even if the default capture is by-value. For such uses-cases a function object class should be used to make the desired value capturing and propagation explicit.</p>
+<p>Limiting the capture list to <code>[&amp;]</code> (implicitly capture by reference) is a simplifying restriction that still provides good support for HotSpot usage, while reducing the cases a reader must recognize and understand.</p>
+<ul>
+<li><p>Many common lambda uses require reference capture. Not permitting it would substantially reduce the utility of lambdas.</p></li>
+<li><p>Referential transparency. Implicit reference capture makes variable references in the lambda body have the same meaning they would have in the enclosing code. There isn't a semantic barrier across which the meaning of a variable changes.</p></li>
+<li><p>Explicit reference capture introduces significant clutter, especially when lambda expressions are relatively small and simple, as they should be in HotSpot code.</p></li>
+<li><p>There are a number of reasons why by-value capture might be used, but for the most part they don't apply to HotSpot code, given other usage restrictions.</p>
+<ul>
+<li><p>A primary use-case for by-value capture is to support escaping uses, where values captured by-reference might become invalid. That use-case doesn't apply if only downward lambdas are used.</p></li>
+<li><p>By-value capture can also make a lambda-local copy for mutation, which requires making the lambda <code>mutable</code>; see below.</p></li>
+<li><p>By-value capture might be viewed as an optimization, avoiding any overhead for reference capture of cheap to copy values. But the compiler can often eliminate any such overhead.</p></li>
+<li><p>By-value capture by a non-<code>mutable</code> lambda makes the captured values const, preventing any modification by the lambda and making the captured value unaffected by modifications to the outer variable. But this only applies to captured auto variables, not member variables, and is inconsistent with referential transparency.</p></li>
+</ul></li>
+<li><p>Non-capturing lambdas (with an empty capture list - <code>[]</code>) have limited utility. There are cases where no captures are required (pure functions, for example), but if the function is small and simple then that's obvious anyway.</p></li>
+<li><p>Capture initializers (a C++14 feature - <a href="https://isocpp.org/files/papers/N3649.html">N3649</a>) are not permitted. Capture initializers inherently increase the complexity of the capture list, and provide little benefit over an additional in-scope local variable.</p></li>
+</ul>
+<p>The use of <code>mutable</code> lambda expressions is forbidden because there don't seem to be many, if any, good use-cases for them in HotSpot. A lambda expression needs to be mutable in order to modify a by-value captured value. But with only downward lambdas, such usage seems likely to be rare and complicated. It is better to use a function object class in any such cases that arise, rather than requiring all HotSpot developers to understand this relatively obscure feature.</p>
+<p>While it is possible to directly invoke an anonymous lambda expression, that feature should not be used, as such a form can be confusing to readers. Instead, name the lambda and call it by name.</p>
+<p>Some reasons to prefer a named lambda instead of an anonymous lambda are</p>
+<ul>
+<li><p>The body contains non-trivial control flow or declarations or other nested constructs.</p></li>
+<li><p>Its role in an argument list is hard to guess without examining the function declaration. Give it a name that indicates its purpose.</p></li>
+<li><p>It has an unusual capture list.</p></li>
+<li><p>It has a complex explicit return type or parameter types.</p></li>
+</ul>
+<p>Lambda expressions, and particularly anonymous lambda expressions, should be simple and compact. One-liners are good. Anonymous lambdas should usually be limited to a couple lines of body code. More complex lambdas should be named. A named lambda should not clutter the enclosing function and make it long and complex; do continue to break up large functions via the use of separate helper functions.</p>
+<p>An anonymous lambda expression should either be a one-liner in a one-line expression, or isolated in its own set of lines. Don't place part of a lambda expression on the same line as other arguments to a function. The body of a multi-line lambda argument should be indented from the start of the capture list, as if that were the start of an ordinary function definition. The body of a multi-line named lambda should be indented one step from the variable's indentation.</p>
+<p>Some examples:</p>
+<ol type="1">
+<li><code>foo([&amp;] { ++counter; });</code></li>
+<li><code>foo(x, [&amp;] { ++counter; });</code></li>
+<li><code>foo([&amp;] { if (predicate) ++counter; });</code></li>
+<li><code>foo([&amp;] { auto tmp = process(x); tmp.f(); return tmp.g(); })</code></li>
+<li><p>Separate one-line lambda from other arguments:</p>
+<pre><code>foo(c.begin(), c.end(),
+    [&amp;] (const X&amp; x) { do_something(x); return x.value(); });</code></pre></li>
+<li><p>Indentation for multi-line lambda:</p>
+<pre><code>c.do_entries([&amp;] (const X&amp; x) {
+               do_something(x, a);
+               do_something1(x, b);
+               do_something2(x, c);
+             });</code></pre></li>
+<li><p>Separate multi-line lambda from other arguments:</p>
+<pre><code>foo(c.begin(), c.end(),
+    [&amp;] (const X&amp; x) {
+      do_something(x, a);
+      do_something1(x, b);
+      do_something2(x, c);
+    });</code></pre></li>
+<li><p>Multi-line named lambda:</p>
+<pre><code>auto do_entry = [&amp;] (const X&amp; x) {
+  do_something(x, a);
+  do_something1(x, b);
+  do_something2(x, c);
+};</code></pre></li>
+</ol>
+<p>Item 4, and especially items 6 and 7, are pushing the simplicity limits for anonymous lambdas. Item 6 might be better written using a named lambda:</p>
+<pre><code>c.do_entries(do_entry);</code></pre>
+<p>Note that C++11 also added <em>bind expressions</em> as a way to write a function object for partial application, using <code>std::bind</code> and related facilities from the Standard Library. <code>std::bind</code> generalizes and replaces some of the binders from C++03. Bind expressions are not permitted in HotSpot code. They don't provide enough benefit over lambdas or local function classes in the cases where bind expressions are applicable to warrant the introduction of yet another mechanism in this space into HotSpot code.</p>
+<p>References:</p>
+<ul>
+<li>Local and unnamed types as template parameters (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm">n2657</a>)</li>
+<li>New wording for C++0x lambdas (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2927.pdf">n2927</a>)</li>
+<li>Generalized lambda capture (init-capture) (<a href="https://isocpp.org/files/papers/N3648.html">N3648</a>)</li>
+<li>Generic (polymorphic) lambda expressions (<a href="https://isocpp.org/files/papers/N3649.html">N3649</a>)</li>
+</ul>
+<p>References from C++17</p>
+<ul>
+<li>Wording for constexpr lambda (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0170r1.pdf">p0170r1</a>)</li>
+<li>Lambda capture of *this by Value (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0018r3.html">p0018r3</a>)</li>
+</ul>
+<p>References from C++20</p>
+<ul>
+<li>Allow lambda capture [=, this] (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0409r2.html">p0409r2</a>)</li>
+<li>Familiar template syntax for generic lambdas (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0428r2.pdf">p0428r2</a>)</li>
+<li>Simplifying implicit lambda capture (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0588r1.html">p0588r1</a>)</li>
+<li>Default constructible and assignable stateless lambdas (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0624r2.pdf">p0624r2</a>)</li>
+<li>Lambdas in unevaluated contexts (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0315r4.pdf">p0315r4</a>)</li>
+<li>Allow pack expansion in lambda init-capture (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0780r2.html">p0780r2</a>) (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2020/p2095r0.html">p2095r0</a>)</li>
+<li>Deprecate implicit capture of this via [=] (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0806r2.html">p0806r2</a>)</li>
+</ul>
+<p>References from C++23</p>
+<ul>
+<li>Make () more optional for lambdas (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2020/p1102r2.html">p1102r2</a>)</li>
+</ul>
+<h3 id="inheriting-constructors">Inheriting constructors</h3>
+<p>Do not use <em>inheriting constructors</em> (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2540.htm">n2540</a>).</p>
+<p>C++11 provides simple syntax allowing a class to inherit the constructors of a base class. Unfortunately there are a number of problems with the original specification, and C++17 contains significant revisions (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0136r1.html" title="p0136r1">p0136r1</a> opens with a list of 8 Core Issues). Since HotSpot doesn't support use of C++17, use of inherited constructors could run into those problems. Such uses might also change behavior in a future HotSpot update to use C++17 or later, potentially in subtle ways that could lead to hard to diagnose problems. Because of this, HotSpot code must not use inherited constructors.</p>
+<p>Note that gcc7 provides the <code>-fnew-inheriting-ctors</code> option to use the <a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0136r1.html" title="p0136r1">p0136r1</a> semantics. This is enabled by default when using C++17 or later. It is also enabled by default for <code>fabi-version=11</code> (introduced by gcc7) or higher when using C++11/14, as the change is considered a Defect Report that applies to those versions. Earlier versions of gcc don't have that option, and other supported compilers may not have anything similar.</p>
 <h3 id="additional-permitted-features">Additional Permitted Features</h3>
 <ul>
 <li><p><code>constexpr</code> (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2235.pdf">n2235</a>) (<a href="https://isocpp.org/files/papers/N3652.html">n3652</a>)</p></li>
@@ -305,8 +427,8 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <li><p>Dynamic initialization and destruction with concurrency (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2660.htm">n2660</a>)</p></li>
 <li><p><code>final</code> virtual specifiers for classes and virtual functions (<a href="http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm">n2928</a>), (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm">n3206</a>), (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm">n3272</a>)</p></li>
 <li><p><code>override</code> virtual specifiers for virtual functions (<a href="http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm">n2928</a>), (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm">n3206</a>), (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm">n3272</a>)</p></li>
-<li><p>Local and unnamed types as template parameters (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm">n2657</a>)</p></li>
 <li><p>Range-based <code>for</code> loops (<a href="http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2930.html">n2930</a>) (<a href="https://en.cppreference.com/w/cpp/language/range-for">range-for</a>)</p></li>
+<li><p>Unrestricted Unions (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2544.pdf">n2544</a>)</p></li>
 </ul>
 <h3 id="excluded-features">Excluded Features</h3>
 <ul>
@@ -322,7 +444,7 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <li><p>Inline namespaces (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2535.htm">n2535</a>) — HotSpot makes very limited use of namespaces.</p></li>
 <li><p><code>using namespace</code> directives. In particular, don't use <code>using namespace std;</code> to avoid needing to qualify Standard Library names.</p></li>
 <li><p>Propagating exceptions (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2179.html">n2179</a>) — HotSpot does not permit the use of exceptions, so this feature isn't useful.</p></li>
-<li><p>Avoid namespace-scoped variables with non-constexpr initialization. In particular, avoid variables with types requiring non-trivial initialization or destruction. Initialization order problems can be difficult to deal with and lead to surprises, as can destruction ordering. HotSpot doesn't generally try to cleanup on exit, and running destructors at exit can also lead to problems.</p></li>
+<li><p>Avoid non-local variables with non-constexpr initialization. In particular, avoid variables with types requiring non-trivial initialization or destruction. Initialization order problems can be difficult to deal with and lead to surprises, as can destruction ordering. HotSpot doesn't generally try to cleanup on exit, and running destructors at exit can also lead to problems.</p></li>
 <li><p><code>[[deprecated]]</code> attribute (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3760.html">n3760</a>) — Not relevant in HotSpot code.</p></li>
 <li><p>Avoid most operator overloading, preferring named functions. When operator overloading is used, ensure the semantics conform to the normal expected behavior of the operation.</p></li>
 <li><p>Avoid most implicit conversion constructors and (implicit or explicit) conversion operators. (Note that conversion to <code>bool</code> isn't needed in HotSpot code because of the &quot;no implicit boolean&quot; guideline.)</p></li>
@@ -337,7 +459,6 @@ while ( test_foo(args...) ) { // No, excess spaces around control</code></pre></
 <li><p>Member initializers and aggregates (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3653.html">n3653</a>)</p></li>
 <li><p><code>[[noreturn]]</code> attribute (<a href="http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2761.pdf">n2761</a>)</p></li>
 <li><p>Rvalue references and move semantics</p></li>
-<li><p>Lambdas</p></li>
 </ul>
 </body>
 </html>

doc/hotspot-style.md

@@ -56,12 +56,19 @@ can be pointed out here.
 
 Proposed changes should be discussed on the
 [HotSpot Developers](mailto:hotspot-dev@openjdk.java.net) mailing
-list, and approved by
-[rough consensus](https://en.wikipedia.org/wiki/Rough_consensus) of
+list.  Changes are likely to be cautious and incremental, since HotSpot
+coders have been using these guidelines for years.
+
+Substantive changes are approved by
+[rough consensus](https://www.rfc-editor.org/rfc/rfc7282.html) of
 the [HotSpot Group](https://openjdk.java.net/census#hotspot) Members.
 The Group Lead determines whether consensus has been reached.
-Changes are likely to be cautious and incremental, since HotSpot
-coders have been using these guidelines for years.
+
+Editorial changes (changes that only affect the description of HotSpot
+style, not its substance) do not require the full consensus gathering
+process.  The normal HotSpot pull request process may be used for
+editorial changes, with the additional requirement that the requisite
+reviewers are also HotSpot Group Members.
 
 ## Structure and Formatting
 
@@ -287,7 +294,9 @@ well.
 or consistency.  Gratuitous whitespace changes will make integrations
 and backports more difficult.
 
-* Use One-True-Brace-Style. The opening brace for a function or class
+* Use [One-True-Brace-Style](
+https://en.wikipedia.org/wiki/Indentation_style#Variant:_1TBS_(OTBS)).
+The opening brace for a function or class
 is normally at the end of the line; it is sometimes moved to the
 beginning of the next line for emphasis.  Substatements are enclosed
 in braces, even if there is only a single statement.  Extremely simple
@@ -409,7 +418,7 @@ Similar discussions for some other projects:
 * [Google C++ Style Guide](https://google.github.io/styleguide/cppguide.html) —
 Currently (2020) targeting C++17.
 
-* [C++11 and C++14 use in Chromium](https://chromium-cpp.appspot.com) —
+* [C++11 and C++14 use in Chromium](https://chromium.googlesource.com/chromium/src/+/main/styleguide/c++/c++-features.md) —
 Categorizes features as allowed, banned, or to be discussed.
 
 * [llvm Coding Standards](https://llvm.org/docs/CodingStandards.html) —
@@ -462,7 +471,9 @@ code is disabled for some platforms.
 Rationale: HotSpot often uses "resource" or "arena" allocation.  Even
 where heap allocation is used, the standard global functions are
 avoided in favor of wrappers around malloc and free that support the
-VM's Native Memory Tracking (NMT) feature.
+VM's Native Memory Tracking (NMT) feature.  Typically, uses of the global
+operator new are inadvertent and therefore often associated with memory
+leaks.
 
 Native memory allocation failures are often treated as non-recoverable.
 The place where "out of memory" is (first) detected may be an innocent
@@ -596,9 +607,7 @@ use can make code much harder to understand.
 Only use if the function body has a very small number of `return`
 statements, and generally relatively little other code.
 
-* Generic lambdas.  Lambdas are not (yet) permitted.
-
-* Lambda init captures.  Lambdas are not (yet) permitted.
+* Also see [lambda expressions](#lambdaexpressions).
 
 ### Expression SFINAE
 
@@ -624,7 +633,7 @@ Here are a few closely related example bugs:<br>
 ### enum
 
 Where appropriate, _scoped-enums_ should be used.
-([n2347](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf)) 
+([n2347](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf))
 
 Use of _unscoped-enums_ is permitted, though ordinary constants may be
 preferable when the automatic initializer feature isn't used.
@@ -644,10 +653,12 @@ integral constants.
 
 ### thread_local
 
-Do not use `thread_local`
+Avoid use of `thread_local`
 ([n2659](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2659.htm));
-instead, use the HotSpot macro `THREAD_LOCAL`.  The initializer must
-be a constant expression.
+and instead, use the HotSpot macro `THREAD_LOCAL`, for which the initializer must
+be a constant expression. When `thread_local` must be used, use the Hotspot macro
+`APPROVED_CPP_THREAD_LOCAL` to indicate that the use has been given appropriate
+consideration.
 
 As was discussed in the review for
 [JDK-8230877](https://mail.openjdk.java.net/pipermail/hotspot-dev/2019-September/039487.html),
@@ -656,14 +667,18 @@ semantics.  However, that support requires a run-time penalty for
 references to non-function-local `thread_local` variables defined in a
 different translation unit, even if they don't need dynamic
 initialization.  Dynamic initialization and destruction of
-namespace-scoped thread local variables also has the same ordering
-problems as for ordinary namespace-scoped variables.
+non-local `thread_local` variables also has the same ordering
+problems as for ordinary non-local variables. So we avoid use of
+`thread_local` in general, limiting its use to only those cases where dynamic
+initialization or destruction are essential. See
+[JDK-8282469](https://bugs.openjdk.java.net/browse/JDK-8282469)
+for further discussion.
 
 ### nullptr
 
 Prefer `nullptr`
 ([n2431](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf))
-to `NULL`.  Don't use (constexpr or literal) 0 for pointers. 
+to `NULL`.  Don't use (constexpr or literal) 0 for pointers.
 
 For historical reasons there are widespread uses of both `NULL` and of
 integer 0 as a pointer value.
@@ -703,10 +718,301 @@ Some relevant sections from cppreference.com:
 Although related, the use of `std::initializer_list` remains forbidden, as
 part of the avoidance of the C++ Standard Library in HotSpot code.
 
+### Local Function Objects
+
+* Local function objects, including lambda expressions, may be used.
+* Lambda expressions must only be used as a downward value.
+* Prefer `[&]` as the capture list of a lambda expression.
+* Return type deduction for lambda expressions is permitted, and indeed encouraged.
+* An empty parameter list for a lambda expression may be elided.
+* A lambda expression must not be `mutable`.
+* Generic lambda expressions are permitted.
+* Lambda expressions should be relatively simple.
+* Anonymous lambda expressions should not overly clutter the enclosing expression.
+* An anonymous lambda expression must not be directly invoked.
+* Bind expressions are forbidden.
+
+Single-use function objects can be defined locally within a function,
+directly at the point of use.  This is an alternative to having a function
+or function object class defined at class or namespace scope.
+
+This usage was somewhat limited by C++03, which does not permit such a class
+to be used as a template parameter.  That restriction was removed by C++11
+([n2657]). Use of this feature is permitted.
+
+Many HotSpot protocols involve "function-like" objects that involve some
+named member function rather than a call operator.  For example, a function
+that performs some action on all threads might be written as
+
+```
+void do_something() {
+  struct DoSomething : public ThreadClosure {
+    virtual void do_thread(Thread* t) {
+      ... do something with t ...
+    }
+  } closure;
+  Threads::threads_do(&closure);
+}
+```
+
+HotSpot code has historically usually placed the DoSomething class at
+namespace (or sometimes class) scope.  This separates the function's code
+from its use, often to the detriment of readability.  It requires giving the
+class a globally unique name (if at namespace scope).  It also loses the
+information that the class is intended for use in exactly one place, and
+does not have any subclasses.  (However, the latter can now be indicated by
+declaring it `final`.)  Often, for simplicity, a local class will skip
+things like access control and accessor functions, giving the enclosing
+function direct access to the implementation and eliminating some
+boilerplate that might be provided if the class is in some outer (more
+accessible) scope.  On the other hand, if there is a lot of surrounding code
+in the function body or the local class is of significant size, defining it
+locally can increase clutter and reduce readability.
+
+<a name="lambdaexpressions"></a>
+C++11 added _lambda expressions_ as a new way to write a function object.
+Simple lambda expressions can be significantly more concise than a function
+object, eliminating a lot of boiler-plate.  On the other hand, a complex
+lambda expression may not provide much, if any, readability benefit compared
+to an ordinary function object.  Also, while a lambda can encapsulate a call
+to a "function-like" object, it cannot be used in place of such.
+
+A common use for local functions is as one-use [RAII] objects.  The amount
+of boilerplate for a function object class (local or not) makes such usage
+somewhat clumsy and verbose.  But with the help of a small amount of
+supporting utility code, lambdas work particularly well for this use case.
+
+Another use for local functions is [partial application][PARTIALAPP].  Again
+here, lambdas are typically much simpler and less verbose than function
+object classes.
+
+Because of these benefits, lambda expressions are permitted in HotSpot code,
+with some restrictions and usage guidance.  An anonymous lambda is one which
+is passed directly as an argument.  A named lambda is the value of a
+variable, which is its name.
+
+Lambda expressions should only be passed downward.  In particular, a lambda
+should not be returned from a function or stored in a global variable,
+whether directly or as the value of a member of some other object.  Lambda
+capture is syntactically subtle (by design), and propagating a lambda in
+such ways can easily pass references to captured values to places where they
+are no longer valid.  In particular, members of the enclosing `this` object
+are effectively captured by reference, even if the default capture is
+by-value.  For such uses-cases a function object class should be used to
+make the desired value capturing and propagation explicit.
+
+Limiting the capture list to `[&]` (implicitly capture by reference) is a
+simplifying restriction that still provides good support for HotSpot usage,
+while reducing the cases a reader must recognize and understand.
+
+* Many common lambda uses require reference capture.  Not permitting it
+would substantially reduce the utility of lambdas.
+
+* Referential transparency.  Implicit reference capture makes variable
+references in the lambda body have the same meaning they would have in the
+enclosing code.  There isn't a semantic barrier across which the meaning of
+a variable changes.
+
+* Explicit reference capture introduces significant clutter, especially when
+lambda expressions are relatively small and simple, as they should be in
+HotSpot code.
+
+* There are a number of reasons why by-value capture might be used, but for
+the most part they don't apply to HotSpot code, given other usage restrictions.
+
+    * A primary use-case for by-value capture is to support escaping uses,
+    where values captured by-reference might become invalid.  That use-case
+    doesn't apply if only downward lambdas are used.
+
+    * By-value capture can also make a lambda-local copy for mutation, which
+    requires making the lambda `mutable`; see below.
+
+    * By-value capture might be viewed as an optimization, avoiding any
+    overhead for reference capture of cheap to copy values.  But the
+    compiler can often eliminate any such overhead.
+
+    * By-value capture by a non-`mutable` lambda makes the captured values
+    const, preventing any modification by the lambda and making the captured
+    value unaffected by modifications to the outer variable.  But this only
+    applies to captured auto variables, not member variables, and is
+    inconsistent with referential transparency.
+
+* Non-capturing lambdas (with an empty capture list - `[]`) have limited
+utility.  There are cases where no captures are required (pure functions,
+for example), but if the function is small and simple then that's obvious
+anyway.
+
+* Capture initializers (a C++14 feature - [N3649]) are not permitted.
+Capture initializers inherently increase the complexity of the capture list,
+and provide little benefit over an additional in-scope local variable.
+
+The use of `mutable` lambda expressions is forbidden because there don't
+seem to be many, if any, good use-cases for them in HotSpot.  A lambda
+expression needs to be mutable in order to modify a by-value captured value.
+But with only downward lambdas, such usage seems likely to be rare and
+complicated.  It is better to use a function object class in any such cases
+that arise, rather than requiring all HotSpot developers to understand this
+relatively obscure feature.
+
+While it is possible to directly invoke an anonymous lambda expression, that
+feature should not be used, as such a form can be confusing to readers.
+Instead, name the lambda and call it by name.
+
+Some reasons to prefer a named lambda instead of an anonymous lambda are
+
+* The body contains non-trivial control flow or declarations or other nested
+constructs.
+
+* Its role in an argument list is hard to guess without examining the
+function declaration.  Give it a name that indicates its purpose.
+
+* It has an unusual capture list.
+
+* It has a complex explicit return type or parameter types.
+
+Lambda expressions, and particularly anonymous lambda expressions, should be
+simple and compact.  One-liners are good.  Anonymous lambdas should usually
+be limited to a couple lines of body code.  More complex lambdas should be
+named.  A named lambda should not clutter the enclosing function and make it
+long and complex; do continue to break up large functions via the use of
+separate helper functions.
+
+An anonymous lambda expression should either be a one-liner in a one-line
+expression, or isolated in its own set of lines.  Don't place part of a
+lambda expression on the same line as other arguments to a function.  The
+body of a multi-line lambda argument should be indented from the start of
+the capture list, as if that were the start of an ordinary function
+definition.  The body of a multi-line named lambda should be indented one
+step from the variable's indentation.
+
+Some examples:
+
+1. `foo([&] { ++counter; });`
+2. `foo(x, [&] { ++counter; });`
+3. `foo([&] { if (predicate) ++counter; });`
+4. `foo([&] { auto tmp = process(x); tmp.f(); return tmp.g(); })`
+5. Separate one-line lambda from other arguments:
+
+    ```
+    foo(c.begin(), c.end(),
+        [&] (const X& x) { do_something(x); return x.value(); });
+    ```
+6. Indentation for multi-line lambda:
+
+    ```
+    c.do_entries([&] (const X& x) {
+                   do_something(x, a);
+                   do_something1(x, b);
+                   do_something2(x, c);
+                 });
+    ```
+7. Separate multi-line lambda from other arguments:
+
+    ```
+    foo(c.begin(), c.end(),
+        [&] (const X& x) {
+          do_something(x, a);
+          do_something1(x, b);
+          do_something2(x, c);
+        });
+    ```
+8. Multi-line named lambda:
+
+    ```
+    auto do_entry = [&] (const X& x) {
+      do_something(x, a);
+      do_something1(x, b);
+      do_something2(x, c);
+    };
+    ```
+
+Item 4, and especially items 6 and 7, are pushing the simplicity limits for
+anonymous lambdas.  Item 6 might be better written using a named lambda:
+```
+c.do_entries(do_entry);
+```
+
+Note that C++11 also added _bind expressions_ as a way to write a function
+object for partial application, using `std::bind` and related facilities
+from the Standard Library.  `std::bind` generalizes and replaces some of the
+binders from C++03.  Bind expressions are not permitted in HotSpot code.
+They don't provide enough benefit over lambdas or local function classes in
+the cases where bind expressions are applicable to warrant the introduction
+of yet another mechanism in this space into HotSpot code.
+
+References:
+
+* Local and unnamed types as template parameters ([n2657])
+* New wording for C++0x lambdas ([n2927])
+* Generalized lambda capture (init-capture) ([N3648])
+* Generic (polymorphic) lambda expressions ([N3649])
+
+[n2657]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm
+[n2927]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2927.pdf
+[N3648]: https://isocpp.org/files/papers/N3648.html
+[N3649]: https://isocpp.org/files/papers/N3649.html
+
+References from C++17
+
+* Wording for constexpr lambda ([p0170r1])
+* Lambda capture of *this by Value ([p0018r3])
+
+[p0170r1]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0170r1.pdf
+[p0018r3]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0018r3.html
+
+References from C++20
+
+* Allow lambda capture [=, this] ([p0409r2])
+* Familiar template syntax for generic lambdas ([p0428r2])
+* Simplifying implicit lambda capture ([p0588r1])
+* Default constructible and assignable stateless lambdas ([p0624r2])
+* Lambdas in unevaluated contexts ([p0315r4])
+* Allow pack expansion in lambda init-capture ([p0780r2]) ([p2095r0])
+* Deprecate implicit capture of this via [=] ([p0806r2])
+
+[p0409r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0409r2.html
+[p0428r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0428r2.pdf
+[p0588r1]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0588r1.html
+[p0624r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0624r2.pdf
+[p0315r4]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2017/p0315r4.pdf
+[p0780r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0780r2.html
+[p2095r0]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2020/p2095r0.html
+[p0806r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0806r2.html
+
+References from C++23
+
+* Make () more optional for lambdas  ([p1102r2])
+
+[p1102r2]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2020/p1102r2.html
+
+### Inheriting constructors
+
+Do not use _inheriting constructors_
+([n2540](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2540.htm)).
+
+C++11 provides simple syntax allowing a class to inherit the constructors of a
+base class.  Unfortunately there are a number of problems with the original
+specification, and C++17 contains significant revisions ([p0136r1] opens with
+a list of 8 Core Issues).  Since HotSpot doesn't support use of C++17, use of
+inherited constructors could run into those problems. Such uses might also
+change behavior in a future HotSpot update to use C++17 or later, potentially
+in subtle ways that could lead to hard to diagnose problems.  Because of this,
+HotSpot code must not use inherited constructors.
+
+Note that gcc7 provides the `-fnew-inheriting-ctors` option to use the
+[p0136r1] semantics.  This is enabled by default when using C++17 or later.
+It is also enabled by default for `fabi-version=11` (introduced by gcc7) or
+higher when using C++11/14, as the change is considered a Defect Report that
+applies to those versions.  Earlier versions of gcc don't have that option,
+and other supported compilers may not have anything similar.
+
+[p0136r1]: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0136r1.html
+  "p0136r1"
+
 ### Additional Permitted Features
 
 * `constexpr`
-([n2235](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2235.pdf)) 
+([n2235](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2235.pdf))
 ([n3652](https://isocpp.org/files/papers/N3652.html))
 
 * Sized deallocation
@@ -757,13 +1063,13 @@ part of the avoidance of the C++ Standard Library in HotSpot code.
 ([n3206](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm)),
 ([n3272](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm))
 
-* Local and unnamed types as template parameters
-([n2657](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm))
-
 * Range-based `for` loops
 ([n2930](http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2930.html))
 ([range-for](https://en.cppreference.com/w/cpp/language/range-for))
 
+* Unrestricted Unions
+([n2544](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2544.pdf))
+
 ### Excluded Features
 
 * New string and character literals
@@ -795,7 +1101,7 @@ namespace std;` to avoid needing to qualify Standard Library names.
 ([n2179](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2179.html)) &mdash;
 HotSpot does not permit the use of exceptions, so this feature isn't useful.
 
-* Avoid namespace-scoped variables with non-constexpr initialization.
+* Avoid non-local variables with non-constexpr initialization.
 In particular, avoid variables with types requiring non-trivial
 initialization or destruction.  Initialization order problems can be
 difficult to deal with and lead to surprises, as can destruction
@@ -816,14 +1122,14 @@ in HotSpot code because of the "no implicit boolean" guideline.)
 
 * Avoid covariant return types.
 
-* Avoid `goto` statements. 
+* Avoid `goto` statements.
 
 ### Undecided Features
 
 This list is incomplete; it serves to explicitly call out some
 features that have not yet been discussed.
 
-* Trailing return type syntax for functions 
+* Trailing return type syntax for functions
 ([n2541](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2541.htm))
 
 * Variable templates
@@ -837,10 +1143,7 @@ features that have not yet been discussed.
 
 * Rvalue references and move semantics
 
-* Lambdas
-
-
-[ADL]: https://en.cppreference.com/w/cpp/language/adl 
+[ADL]: https://en.cppreference.com/w/cpp/language/adl
   "Argument Dependent Lookup"
 
 [ODR]: https://en.cppreference.com/w/cpp/language/definition
@@ -854,3 +1157,6 @@ features that have not yet been discussed.
 
 [SFINAE]: https://en.cppreference.com/w/cpp/language/sfinae
   "Substitution Failure Is Not An Error"
+
+[PARTIALAPP]: https://en.wikipedia.org/wiki/Partial_application
+  "Partial Application"

doc/ide.html

@@ -41,14 +41,20 @@
 <pre class="shell"><code>make vscode-project-clangd</code></pre>
 <p>Additional instructions for configuring the given indexer will be displayed after the workspace has been generated.</p>
 <h4 id="visual-studio">Visual Studio</h4>
-<p>This section is a work in progress.</p>
-<pre class="shell"><code>make ide-project</code></pre>
+<p>The make system can generate a Visual Studio project for the Hotspot native source. After configuring, the project is generated using:</p>
+<pre class="shell"><code>make hotspot-ide-project</code></pre>
+<p>This creates a file named <code>jvm.vcxproj</code> in <code>ide\hotspot-visualstudio</code> subfolder of the build output folder. The file can be opened in Visual Studio via <code>File -&gt; Open -&gt; Project/Solution</code>.</p>
 <h4 id="compilation-database">Compilation Database</h4>
 <p>The make system can generate generic native code indexing support in the form of a <a href="https://clang.llvm.org/docs/JSONCompilationDatabase.html">Compilation Database</a> that can be used by many different IDEs and source code indexers.</p>
 <pre class="shell"><code>make compile-commands</code></pre>
 <p>It's also possible to generate the Compilation Database for the HotSpot source code only, which is a bit faster as it includes less information.</p>
 <pre class="shell"><code>make compile-commands-hotspot</code></pre>
 <h3 id="ide-support-for-java-code">IDE support for Java code</h3>
-<p>This section is a work in progress.</p>
+<h4 id="intellij-idea">IntelliJ IDEA</h4>
+<p>The JDK project has a script that can be used for indexing the project with IntelliJ. After configuring and building the JDK, an IntelliJ workspace can be generated by running the following command in the top-level folder of the cloned repository:</p>
+<pre class="shell"><code>bash bin/idea.sh</code></pre>
+<p>To use it, choose <code>File -&gt; Open...</code> in IntelliJ and select the folder where you ran the above script.</p>
+<p>Next, configure the project SDK in IntelliJ. Open <code>File -&gt; Project Structure -&gt; Project</code> and select <code>build/&lt;config&gt;/images/jdk</code> as the SDK to use.</p>
+<p>In order to run the tests from the IDE, you can use the JTReg plugin. Instructions for building and using the plugin can be found <a href="https://github.com/openjdk/jtreg/tree/master/plugins/idea">here</a>.</p>
 </body>
 </html>

doc/ide.md

@@ -45,12 +45,17 @@ after the workspace has been generated.
 
 #### Visual Studio
 
-This section is a work in progress.
+The make system can generate a Visual Studio project for the Hotspot
+native source. After configuring, the project is generated using:
 
 ```shell
-make ide-project
+make hotspot-ide-project
 ```
 
+This creates a file named `jvm.vcxproj` in `ide\hotspot-visualstudio`
+subfolder of the build output folder. The file can be opened in Visual Studio
+via `File -> Open -> Project/Solution`.
+
 #### Compilation Database
 
 The make system can generate generic native code indexing support in the form of
@@ -70,4 +75,24 @@ make compile-commands-hotspot
 
 ### IDE support for Java code
 
-This section is a work in progress.
+#### IntelliJ IDEA
+
+The JDK project has a script that can be used for indexing the project
+with IntelliJ. After configuring and building the JDK, an IntelliJ workspace
+can be generated by running the following command in the top-level folder
+of the cloned repository:
+
+```shell
+bash bin/idea.sh
+```
+
+To use it, choose `File -> Open...` in IntelliJ and select the folder where
+you ran the above script.
+
+Next, configure the project SDK in IntelliJ. Open
+`File -> Project Structure -> Project` and select `build/<config>/images/jdk`
+as the SDK to use.
+
+In order to run the tests from the IDE, you can use the JTReg plugin.
+Instructions for building and using the plugin can be found
+[here](https://github.com/openjdk/jtreg/tree/master/plugins/idea).

doc/testing.html

@@ -231,7 +231,7 @@ TEST FAILURE</code></pre>
     JTREG=&quot;JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu
     -Djdk.test.docker.image.version=latest&quot;</code></pre>
 <h3 id="non-us-locale">Non-US locale</h3>
-<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG=&quot;en_US&quot;</code> in the environment before running tests should work. On Windows, setting <code>JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot;</code> helps for most, but not all test cases.</p>
+<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG=&quot;en_US&quot;</code> in the environment before running tests should work. On Windows or MacOS, setting <code>JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot;</code> helps for most, but not all test cases.</p>
 <p>For example:</p>
 <pre><code>$ export LANG=&quot;en_US&quot; &amp;&amp; make test TEST=...
 $ make test JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot; TEST=...</code></pre>
@@ -242,39 +242,14 @@ $ make test JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot; TE
     JTREG=&quot;JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs&quot;</code></pre>
 <p>For more notes about the PKCS11 tests, please refer to test/jdk/sun/security/pkcs11/README.</p>
 <h3 id="client-ui-tests">Client UI Tests</h3>
-<h4 id="system-key-shortcuts">System key shortcuts</h4>
 <p>Some Client UI tests use key sequences which may be reserved by the operating system. Usually that causes the test failure. So it is highly recommended to disable system key shortcuts prior testing. The steps to access and disable system key shortcuts for various platforms are provided below.</p>
-<h5 id="macos">MacOS</h5>
+<h4 id="macos">MacOS</h4>
 <p>Choose Apple menu; System Preferences, click Keyboard, then click Shortcuts; select or deselect desired shortcut.</p>
 <p>For example, test/jdk/javax/swing/TooltipManager/JMenuItemToolTipKeyBindingsTest/JMenuItemToolTipKeyBindingsTest.java fails on MacOS because it uses <code>CTRL + F1</code> key sequence to show or hide tooltip message but the key combination is reserved by the operating system. To run the test correctly the default global key shortcut should be disabled using the steps described above, and then deselect &quot;Turn keyboard access on or off&quot; option which is responsible for <code>CTRL + F1</code> combination.</p>
-<h5 id="linux">Linux</h5>
+<h4 id="linux">Linux</h4>
 <p>Open the Activities overview and start typing Settings; Choose Settings, click Devices, then click Keyboard; set or override desired shortcut.</p>
-<h5 id="windows">Windows</h5>
+<h4 id="windows">Windows</h4>
 <p>Type <code>gpedit</code> in the Search and then click Edit group policy; navigate to User Configuration -&gt; Administrative Templates -&gt; Windows Components -&gt; File Explorer; in the right-side pane look for &quot;Turn off Windows key hotkeys&quot; and double click on it; enable or disable hotkeys.</p>
 <p>Note: restart is required to make the settings take effect.</p>
-<h4 id="robot-api">Robot API</h4>
-<p>Most automated Client UI tests use <code>Robot</code> API to control
-the UI. Usually, the default operating system settings need to be
-adjusted for Robot to work correctly. The detailed steps how to access
-and update these settings for different platforms are provided
-below.</p>
-<h5 id="macos-1">macOS</h5>
-<p><code>Robot</code> is not permitted to control your Mac by default
-since macOS 10.15. To allow it, choose Apple menu -&gt; System Settings,
-click Privacy &amp; Security; then click Accessibility and ensure the
-following apps are allowed to control your computer: <em>Java</em> and
-<em>Terminal</em>. If the tests are run from an IDE, the IDE should be
-granted this permission too.</p>
-<h5 id="windows-1">Windows</h5>
-<p>On Windows if Cygwin terminal is used to run the tests, there is a
-delay in focus transfer. Usually it causes automated UI test failure. To
-disable the delay, type <code>regedit</code> in the Search and then
-select Registry Editor; navigate to the following key:
-<code>HKEY_CURRENT_USER\Control Panel\Desktop</code>; make sure the
-<code>ForegroundLockTimeout</code> value is set to 0.</p>
-<p>Additional information about Client UI tests configuration for
-various operating systems can be obtained at <a
-href="https://wiki.openjdk.org/display/ClientLibs/Automated+client+GUI+testing+system+set+up+requirements">Automated
-client GUI testing system set up requirements</a></p>
 </body>
 </html>

doc/testing.md

@@ -514,7 +514,7 @@ $ make test TEST="jtreg:test/hotspot/jtreg/containers/docker" \
 
 If your locale is non-US, some tests are likely to fail. To work around this
 you can set the locale to US. On Unix platforms simply setting `LANG="en_US"`
-in the environment before running tests should work. On Windows, setting
+in the environment before running tests should work. On Windows or MacOS, setting
 `JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US"` helps for most, but
 not all test cases.
 
@@ -546,14 +546,12 @@ test/jdk/sun/security/pkcs11/README.
 
 ### Client UI Tests
 
-#### System key shortcuts
-
 Some Client UI tests use key sequences which may be reserved by the operating
 system. Usually that causes the test failure. So it is highly recommended to
 disable system key shortcuts prior testing. The steps to access and disable
 system key shortcuts for various platforms are provided below.
 
-##### macOS
+#### MacOS
 
 Choose Apple menu; System Preferences, click Keyboard, then click Shortcuts;
 select or deselect desired shortcut.
@@ -566,12 +564,12 @@ test correctly the default global key shortcut should be disabled using the
 steps described above, and then deselect "Turn keyboard access on or off"
 option which is responsible for `CTRL + F1` combination.
 
-##### Linux
+#### Linux
 
 Open the Activities overview and start typing Settings; Choose Settings, click
 Devices, then click Keyboard; set or override desired shortcut.
 
-##### Windows
+#### Windows
 
 Type `gpedit` in the Search and then click Edit group policy; navigate to User
 Configuration -> Administrative Templates -> Windows Components -> File
@@ -580,33 +578,6 @@ double click on it; enable or disable hotkeys.
 
 Note: restart is required to make the settings take effect.
 
-#### Robot API
-
-Most automated Client UI tests use `Robot` API to control the UI. Usually,
-the default operating system settings need to be adjusted for Robot
-to work correctly. The detailed steps how to access and update these settings
-for different platforms are provided below.
-
-##### macOS
-
-`Robot` is not permitted to control your Mac by default since
-macOS 10.15. To allow it, choose Apple menu -> System Settings, click
-Privacy & Security; then click Accessibility and ensure the following apps are
-allowed to control your computer: *Java* and *Terminal*. If the tests are run
-from an IDE, the IDE should be granted this permission too.
-
-##### Windows
-
-On Windows if Cygwin terminal is used to run the tests, there is a delay in
-focus transfer. Usually it causes automated UI test failure. To disable the
-delay, type `regedit` in the Search and then select Registry Editor; navigate
-to the following key: `HKEY_CURRENT_USER\Control Panel\Desktop`; make sure
-the `ForegroundLockTimeout` value is set to 0.
-
-Additional information about Client UI tests configuration for various operating
-systems can be obtained at [Automated client GUI testing system set up
-requirements](https://wiki.openjdk.org/display/ClientLibs/Automated+client+GUI+testing+system+set+up+requirements)
-
 ---
 # Override some definitions in the global css file that are not optimal for
 # this document.

jb/project/docker/Dockerfile.aarch64

@@ -1,46 +0,0 @@
-# NOTE: This Dockerfile is meant to be used from the mkdocker_aarch64.sh script.
-
-# Pull a concrete version of Linux that does NOT recieve updates after it's
-# been created.  This is so that the image is as stable as possible to make
-# image creation reproducible.
-# NB: this also means there may be no security-related fixes there, need to
-# move the version to the next manually.
-
-# jetbrains/runtime:jbr17env_aarch64
-FROM arm64v8/centos:7
-
-# Install the necessary build tools
-RUN yum -y update; \
-    yum -y install centos-release-scl; \
-    yum -y install devtoolset-10-10.1-0.el7; \
-    yum -y install \
-        alsa-lib-devel-1.1.8-1.el7.aarch64 \
-        autoconf-2.69-11.el7.noarch \
-        automake-1.13.4-3.el7.noarch \
-        bzip2-1.0.6-13.el7.aarch64 \
-        cups-devel-1.6.3-51.el7.aarch64 \
-        file-5.11-37.el7.aarch64 \
-        fontconfig-devel-2.13.0-4.3.el7.aarch64 \
-        freetype-devel-2.8-14.el7_9.1.aarch64 \
-        giflib-devel-4.1.6-9.el7.aarch64 \
-        git-1.8.3.1-24.el7_9.aarch64 \
-        libtool-2.4.2-22.el7_3.aarch64 \
-        libXi-devel-1.7.9-1.el7.aarch64 \
-        libXrandr-devel-1.5.1-2.el7.aarch64 \
-        libXrender-devel-0.9.10-1.el7.aarch64 \
-        libXt-devel-1.1.5-3.el7.aarch64 \
-        libXtst-devel-1.2.3-1.el7.aarch64 \
-        make-3.82-24.el7.aarch64 \
-        rsync-3.1.2-12.el7_9.aarch64 \
-        tar-1.26-35.el7.aarch64 \
-        unzip-6.0-24.el7_9.aarch64 \
-        wayland-devel-1.15.0-1.el7 \
-        zip-3.0-11.el7.aarch64; \
-   yum -y clean all
-
-ENV PATH="/opt/rh/devtoolset-10/root/usr/bin:${PATH}"
-ENV LD_LIBRARY_PATH="/opt/rh/devtoolset-10/root/usr/lib64:/opt/rh/devtoolset-10/root/usr/lib:/opt/rh/devtoolset-10/root/usr/lib64/dyninst:/opt/rh/devtoolset-10/root/usr/lib/dyninst:/opt/rh/devtoolset-10/root/usr/lib64:/opt/rh/devtoolset-10/root/usr/lib"
-ENV PKG_CONFIG_PATH="/opt/rh/devtoolset-10/root/usr/lib64/pkgconfig"
-
-RUN git config --global user.email "teamcity@jetbrains.com" && \
-    git config --global user.name "builduser"

jb/project/docker/Dockerfile.musl_aarch64

@@ -1,22 +0,0 @@
-# NOTE: This Dockerfile is meant to be used from the mkdocker_musl_aarch64.sh script.
-
-# Pull a concrete version of Linux that does NOT recieve updates after it's
-# been created.  This is so that the image is as stable as possible to make
-# image creation reproducible.
-# NB: this also means there may be no security-related fixes there, need to
-# move the version to the next manually.
-FROM arm64v8/alpine:3.12
-
-# Install the necessary build tools
-RUN     apk --no-cache add --update bash grep tar zip bzip2 rsync fontconfig build-base \
-	    git libx11-dev libxext-dev libxrandr-dev libxrender-dev libxt-dev \
-	    libxtst-dev autoconf freetype-dev cups-dev alsa-lib-dev file \
-	    fontconfig fontconfig-dev linux-headers
-
-# Set up boot JDK for building
-COPY boot_jdk_musl_aarch64.tar.gz /jdk17/
-RUN cd /jdk17 && tar --strip-components=1 -xzf boot_jdk_musl_aarch64.tar.gz && rm /jdk17/boot_jdk_musl_aarch64.tar.gz
-ENV BOOT_JDK=/jdk17
-
-RUN git config --global user.email "teamcity@jetbrains.com" && \
-    git config --global user.name "builduser"

jb/project/docker/Dockerfile.musl_x64

@@ -1,22 +0,0 @@
-# NOTE: This Dockerfile is meant to be used from the mkdocker_musl_x64.sh script.
-
-# Pull a concrete version of Linux that does NOT recieve updates after it's
-# been created.  This is so that the image is as stable as possible to make
-# image creation reproducible.
-# NB: this also means there may be no security-related fixes there, need to
-# move the version to the next manually.
-FROM alpine:3.14
-
-# Install the necessary build tools
-RUN     apk --no-cache add --update bash grep tar zip bzip2 rsync fontconfig build-base \
-	    git libx11-dev libxext-dev libxrandr-dev libxrender-dev libxt-dev \
-	    libxtst-dev autoconf freetype-dev cups-dev alsa-lib-dev file \
-	    fontconfig fontconfig-dev linux-headers
-
-# Set up boot JDK for building
-COPY boot_jdk_musl_amd64.tar.gz /jdk17/
-RUN cd /jdk17 && tar --strip-components=1 -xzf boot_jdk_musl_amd64.tar.gz && rm /jdk17/boot_jdk_musl_amd64.tar.gz
-ENV BOOT_JDK=/jdk17
-
-RUN git config --global user.email "teamcity@jetbrains.com" && \
-    git config --global user.name "builduser"

jb/project/docker/Dockerfile.x86

@@ -1,55 +0,0 @@
-# NOTE: This Dockerfile is meant to be used from the mkdocker_x86.sh script.
-
-# Pull a concrete version of Linux that does NOT receive updates after it's
-# been created.  This is so that the image is as stable as possible to make
-# image creation reproducible.
-# NB: this also means there may be no security-related fixes there, need to
-# move the version to the next manually.
-#FROM i386/ubuntu:xenial
-#FROM i386/ubuntu:bionic
-FROM i386/ubuntu:focal
-
-RUN linux32 \
-    apt-get update && apt-get install -y --no-install-recommends apt-utils
-RUN export DEBIAN_FRONTEND=noninteractive \
-    export DEBCONF_NONINTERACTIVE_SEEN=true && \
-    echo 'tzdata tzdata/Areas select Etc' | debconf-set-selections; \
-    echo 'tzdata tzdata/Zones/Etc select UTC' | debconf-set-selections; \
-    linux32 \
-    apt-get -y install \
-        autoconf \
-        build-essential \
-        curl \
-        file \
-        git \
-        libx11-dev \
-        libxext-dev \
-        libxrender-dev \
-        libxrandr-dev \
-        libxtst-dev \
-        libxt-dev \
-        libcups2-dev \
-        libasound2-data \
-#        libpng12-0 \
-        libasound2 \
-        libfreetype6 \
-        libfontconfig1-dev \
-        libasound2-dev \
-        rsync \
-        unzip \
-        zip
-RUN linux32 \
-    apt-get -y install \
-        g++-10 \
-        gcc-10 && \
-    update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-10 100 --slave /usr/bin/g++ g++ /usr/bin/g++-10 && \
-    apt-get clean -qy && \
-    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# Set up boot JDK for building
-COPY boot_jdk_x86.tar.gz /jdk17/
-RUN cd /jdk17 && tar --strip-components=1 -xzf boot_jdk_x86.tar.gz && rm /jdk17/boot_jdk_x86.tar.gz
-ENV BOOT_JDK=/jdk17
-
-RUN git config --global user.email "teamcity@jetbrains.com" && \
-    git config --global user.name "builduser"

jb/project/docker/Dockerfile.x86_64

@@ -1,36 +0,0 @@
-# jetbrains/runtime:jbr17env_x86_64
-FROM centos:7
-RUN yum -y install centos-release-scl; \
-    yum -y install devtoolset-10-10.1-0.el7; \
-    yum -y install \
-        alsa-lib-devel-1.1.8-1.el7 \
-        autoconf-2.69-11.el7 \
-        automake-1.13.4-3.el7 \
-        bzip2-1.0.6-13.el7 \
-        cups-devel-1.6.3-51.el7 \
-        file-5.11-37.el7 \
-        fontconfig-devel-2.13.0-4.3.el7 \
-        freetype-devel-2.8-14.el7_9.1 \
-        giflib-devel-4.1.6-9.el7 \
-        git-1.8.3.1-24.el7_9 \
-        libtool-2.4.2-22.el7_3 \
-        libXi-devel-1.7.9-1.el7 \
-        libXrandr-devel-1.5.1-2.el7 \
-        libXrender-devel-0.9.10-1.el7 \
-        libXt-devel-1.1.5-3.el7 \
-        libXtst-devel-1.2.3-1.el7 \
-        make-3.82-24.el7 \
-        tar-1.26-35.el7 \
-        unzip-6.0-24.el7_9 \
-        wayland-devel-1.15.0-1.el7 \
-        wget-1.14-18.el7_6.1 \
-        which-2.20-7.el7 \
-        zip-3.0-11.el7
-
-RUN mkdir .git && \
-    git config user.email "teamcity@jetbrains.com" && \
-    git config user.name "builduser"
-
-ENV LD_LIBRARY_PATH="/opt/rh/devtoolset-10/root/usr/lib64:/opt/rh/devtoolset-10/root/usr/lib:/opt/rh/devtoolset-10/root/usr/lib64/dyninst:/opt/rh/devtoolset-10/root/usr/lib/dyninst:/opt/rh/devtoolset-10/root/usr/lib64:/opt/rh/devtoolset-10/root/usr/lib"
-ENV PATH="/opt/rh/devtoolset-10/root/usr/bin::${PATH}"
-ENV PKG_CONFIG_PATH="/opt/rh/devtoolset-10/root/usr/lib64/pkgconfig"

jb/project/docker/mkdocker_aarch64.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# This script creates a Docker image suitable for building AArch64 variant
-# of the JetBrains Runtime version 17.
-
-BOOT_JDK_REMOTE_FILE=zulu17.30.15-ca-jdk17.0.1-linux_aarch64.tar.gz
-BOOT_JDK_SHA=4d9c9116eb0cdd2d7fb220d6d27059f4bf1b7e95cc93d5512bd8ce3791af86c7
-BOOT_JDK_LOCAL_FILE=boot_jdk.tar.gz
-
-if [ ! -f $BOOT_JDK_LOCAL_FILE ]; then
-    # Obtain "boot JDK" from outside of the container.
-    wget -nc https://cdn.azul.com/zulu/bin/${BOOT_JDK_REMOTE_FILE} -O $BOOT_JDK_LOCAL_FILE
-else
-    echo "boot JDK \"$BOOT_JDK_LOCAL_FILE\" present, skipping download"
-fi
-
-# Verify that what we've downloaded can be trusted.
-sha256sum -c - <<EOF
-$BOOT_JDK_SHA *$BOOT_JDK_LOCAL_FILE
-EOF
-
-docker build -t jbr17buildenv -f Dockerfile.aarch64 .
-
-# NB: the resulting container can (and should) be used without the network
-# connection (--network none) during build in order to reduce the chance
-# of build contamination.

jb/project/docker/mkdocker_musl_aarch64.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# This script creates a Docker image suitable for building musl AArch64 variant
-# of the JetBrains Runtime version 17.
-
-BOOT_JDK_REMOTE_FILE=zulu17.32.13-ca-jdk17.0.2-linux_musl_aarch64.tar.gz
-BOOT_JDK_SHA=6b920559abafbe9bdef386a20ecf3a2f318bc1f0d8359eb1f95aee26606bbc70
-BOOT_JDK_LOCAL_FILE=boot_jdk_musl_aarch64.tar.gz
-
-if [ ! -f $BOOT_JDK_LOCAL_FILE ]; then
-    # Obtain "boot JDK" from outside of the container.
-    wget -nc https://cdn.azul.com/zulu/bin/${BOOT_JDK_REMOTE_FILE} -O $BOOT_JDK_LOCAL_FILE
-else
-    echo "boot JDK \"$BOOT_JDK_LOCAL_FILE\" present, skipping download"
-fi
-
-# Verify that what we've downloaded can be trusted.
-sha256sum -c - <<EOF
-$BOOT_JDK_SHA *$BOOT_JDK_LOCAL_FILE
-EOF
-
-docker build -t jbr17buildenv -f Dockerfile.musl_aarch64 .
-
-# NB: the resulting container can (and should) be used without the network
-# connection (--network none) during build in order to reduce the chance
-# of build contamination.

jb/project/docker/mkdocker_musl_x64.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# This script creates a Docker image suitable for building musl-x64 variant
-# of the JetBrains Runtime version 17.
-
-BOOT_JDK_REMOTE_FILE=zulu17.32.13-ca-jdk17.0.2-linux_musl_x64.tar.gz
-BOOT_JDK_SHA=bcc5342011bd9f3643372aadbdfa68d47463ff0d8621668a0bdf2910614d95c6
-BOOT_JDK_LOCAL_FILE=boot_jdk_musl_amd64.tar.gz
-
-if [ ! -f $BOOT_JDK_LOCAL_FILE ]; then
-    # Obtain "boot JDK" from outside of the container.
-    wget -nc https://cdn.azul.com/zulu/bin/${BOOT_JDK_REMOTE_FILE} -O $BOOT_JDK_LOCAL_FILE
-else
-    echo "boot JDK \"$BOOT_JDK_LOCAL_FILE\" present, skipping download"
-fi
-
-# Verify that what we've downloaded can be trusted.
-sha256sum -c - <<EOF
-$BOOT_JDK_SHA *$BOOT_JDK_LOCAL_FILE
-EOF
-
-docker build -t jbr17buildenv -f Dockerfile.musl_x64 .
-
-# NB: the resulting container can (and should) be used without the network
-# connection (--network none) during build in order to reduce the chance
-# of build contamination.

jb/project/docker/mkdocker_x86.sh

@@ -1,26 +0,0 @@
-#!/bin/bash -x
-
-# This script creates a Docker image suitable for building x86 variant
-# of the JetBrains Runtime version 17.
-
-BOOT_JDK_REMOTE_FILE=zulu17.34.19-ca-jdk17.0.3-linux_i686.tar.gz
-BOOT_JDK_SHA=1c35c374ba0001e675d6e80819d5be900c4e141636d5e484992a8c550be14481
-BOOT_JDK_LOCAL_FILE=boot_jdk_x86.tar.gz
-
-if [ ! -f $BOOT_JDK_LOCAL_FILE ]; then
-    # Obtain "boot JDK" from outside of the container.
-    wget -nc https://cdn.azul.com/zulu/bin/${BOOT_JDK_REMOTE_FILE} -O $BOOT_JDK_LOCAL_FILE
-else
-    echo "boot JDK \"$BOOT_JDK_LOCAL_FILE\" present, skipping download"
-fi
-
-# Verify that what we've downloaded can be trusted.
-sha256sum -c - <<EOF
-$BOOT_JDK_SHA *$BOOT_JDK_LOCAL_FILE
-EOF
-
-docker build -t jetbrains/runtime:jbr17env_x86 -f Dockerfile.x86 .
-
-# NB: the resulting container can (and should) be used without the network
-# connection (--network none) during build in order to reduce the chance
-# of build contamination.

jb/project/idea-project-files/jdk-clion/.idea/.name

@@ -1 +0,0 @@
-JetBrainsRuntime

jb/project/idea-project-files/jdk-clion/.idea/vcs.xml

@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="IssueNavigationConfiguration">
-    <option name="links">
-      <list>
-        <IssueNavigationLink>
-          <option name="issueRegexp" value="(?:^|\s|\p{Punct})([A-Z]+\-\d+)(?=$|\s|\p{Punct})" />
-          <option name="linkRegexp" value="https://youtrack.jetbrains.com/issue/$1" />
-        </IssueNavigationLink>
-        <IssueNavigationLink>
-          <option name="issueRegexp" value="(?:^|\s|\p{Punct})(?:JDK-)?(\d{7})(?=$|\s|\p{Punct})" />
-          <option name="linkRegexp" value="https://bugs.openjdk.java.net/browse/JDK-$1" />
-        </IssueNavigationLink>
-      </list>
-    </option>
-  </component>
-  <component name="VcsDirectoryMappings">
-    <mapping directory="$PROJECT_DIR$/../.." vcs="Git" />
-  </component>
-</project>

jb/project/idea-project-files/jetbrains.api.iml

@@ -1,13 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<module type="JAVA_MODULE" version="4">
-  <component name="NewModuleRootManager" inherit-compiler-output="true">
-    <exclude-output />
-    <content url="file://$MODULE_DIR$/src/jetbrains.api">
-      <sourceFolder url="file://$MODULE_DIR$/src/jetbrains.api/src" isTestSource="false" />
-      <sourceFolder url="file://$MODULE_DIR$/src/jetbrains.api/templates" isTestSource="false" />
-    </content>
-    <orderEntry type="sourceFolder" forTests="false" />
-    <orderEntry type="inheritedJdk" />
-  </component>
-</module>
-

jb/project/idea-project-files/modules.xml

@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="ProjectModuleManager">
-    <modules>
-      <module fileurl="file://$PROJECT_DIR$/.idea/jdk.iml" filepath="$PROJECT_DIR$/.idea/jdk.iml" />
-      ###MODULE_IMLS###
-      <module fileurl="file://$PROJECT_DIR$/.idea/jetbrains.api.iml" filepath="$PROJECT_DIR$/.idea/jetbrains.api.iml" />
-      <module fileurl="file://$PROJECT_DIR$/.idea/test.iml" filepath="$PROJECT_DIR$/.idea/test.iml" />
-    </modules>
-  </component>
-</project>
-

jb/project/idea-project-files/vcs.xml

@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="IssueNavigationConfiguration">
-    <option name="links">
-      <list>
-        <IssueNavigationLink>
-          <option name="issueRegexp" value="(?:^|\s|\p{Punct})([A-Z]+\-\d+)(?=$|\s|\p{Punct})" />
-          <option name="linkRegexp" value="https://youtrack.jetbrains.com/issue/$1" />
-        </IssueNavigationLink>
-        <IssueNavigationLink>
-          <option name="issueRegexp" value="(?:^|\s|\p{Punct})(?:JDK-)?(\d{7})(?=$|\s|\p{Punct})" />
-          <option name="linkRegexp" value="https://bugs.openjdk.java.net/browse/JDK-$1" />
-        </IssueNavigationLink>
-      </list>
-    </option>
-  </component>
-  <component name="VcsDirectoryMappings">
-    <mapping directory="$PROJECT_DIR$" vcs="Git" />
-  </component>
-</project>

jb/project/java-gradle/build.gradle

@@ -1,135 +0,0 @@
-apply plugin: 'java'
-import org.gradle.internal.os.OperatingSystem
-
-repositories {
-    mavenCentral()
-}
-
-def test_jvm = {
-    if (project.hasProperty('jbsdkhome')) {
-        file(jbsdkhome + (OperatingSystem.current().isWindows()?"/bin/java.exe" : "/bin/java")).absolutePath
-    } else {
-        if (OperatingSystem.current().isMacOsX()) {
-            file('../../../build/macosx-x86_64-normal-server-release/images/jdk-bundle/jdk-11.0.4.jdk/Contents/Home/bin/java').absolutePath
-        } else if (OperatingSystem.current().isLinux()) {
-            file('../../../build/linux-x86_64-normal-server-release/images/jdk/bin/java').absolutePath
-        } else {
-            file('../../../build/windows-x86_64-normal-server-release/images/jdk/bin/java.exe').absolutePath
-        }
-    }
-}
-
-dependencies {
-    testCompile('junit:junit:4.12'){
-        exclude group: 'org.hamcrest'
-    }
-    testCompile 'org.hamcrest:hamcrest-library:1.3'
-    testCompile 'net.java.dev.jna:jna:4.4.0'
-    testCompile 'com.twelvemonkeys.imageio:imageio-tiff:3.3.2'
-    testCompile 'org.apache.commons:commons-lang3:3.0'
-}
-
-def jdk_modules = ["java.base", "java.logging", "java.prefs",
-               "java.se.ee", "java.sql", "java.datatransfer",
-               "java.management", "java.rmi", "java.security.jgss",
-               "java.sql.rowset", "java.desktop", "java.management.rmi",
-               "java.scripting", "java.security.sasl", "java.transaction",
-               "java.instrument", "java.naming", "java.se",
-               "java.smartcardio", "java.xml.crypto"]
-
-def jdk_class_dirs = []
-
-jdk_modules.collect(jdk_class_dirs) {
-    new File("../../../src/" + it + "/share/classes")
-}
-
-if (OperatingSystem.current().isMacOsX())
-    jdk_modules.collect(jdk_class_dirs) {
-        "../../../src/" + it + "/macosx/classes"
-    }
-else if (OperatingSystem.current().isLinux()) {
-    jdk_modules.collect(jdk_class_dirs) {
-        "../../../src/" + it + "/solaris/classes"
-    }
-    jdk_modules.collect(jdk_class_dirs) {
-        "../../../src/" + it + "/unix/classes"
-    }
-} else
-    jdk_modules.collect(jdk_class_dirs) {
-        "../../../src/" + it + "/windows/classes"
-    }
-
-sourceSets.main.java.srcDirs = jdk_class_dirs
-
-sourceSets {
-    test {
-        java {
-            srcDir "../../../test/jdk/jbu"
-        }
-    }
-}
-
-test.dependsOn.clear()
-
-test.dependsOn tasks.compileTestJava
-
-test {
-    systemProperty "jb.java2d.metal", "true"
-    systemProperty "testdata", file('../../../test/jdk/jbu/testdata').absolutePath
-
-//  Generate golden images for DroidFontTest and MixedTextTest
-//    systemProperty "gentestdata", ""
-
-//  Enable Java2D logging (https://confluence.jetbrains.com/display/JRE/Java2D+Rendering+Logging)
-//  systemProperty "sun.java2d.trace", "log"
-//  systemProperty "sun.java2d.trace", "log,pimpl"
-
-    outputs.upToDateWhen { false }
-    executable = test_jvm()
-
-//  Enable async/dtrace profiler
-    jvmArgs  "-XX:+PreserveFramePointer"
-//  Enable native J2D logging (only in debug build)
-//  Can be turned on for J2D by adding "#define DEBUG 1" into jdk/src/share/native/sun/java2d/Trace.h
-
-//    environment 'J2D_TRACE_LEVEL', '4'
-}
-
-def buildDir = project.buildscript.sourceFile.parentFile.parentFile.parentFile.parentFile
-
-def make_cmd = "make"
-if (OperatingSystem.current().isWindows()) {
-    def cyg_make_cmd = new File("c:/cygwin64/bin/make.exe")
-    if (cyg_make_cmd.exists()) make_cmd = cyg_make_cmd.absolutePath
-}
-def test_run = false
-task make_images {
-    doLast {
-        if (!test_run) {
-            def pb = new ProcessBuilder().command(make_cmd.toString(), "-C", buildDir.absolutePath, "images")
-            def proc = pb.redirectErrorStream(true).start()
-            proc.inputStream.eachLine { println it }
-            assert proc.waitFor() == 0
-        }
-    }
-}
-
-task make_clean {
-    doLast {
-        def pb = new ProcessBuilder().command(make_cmd.toString(), "-C", buildDir.absolutePath, "clean")
-        def proc = pb.redirectErrorStream(true).start()
-        proc.inputStream.eachLine { println it }
-        assert proc.waitFor() == 0
-    }
-}
-
-task run_test {
-    doLast {
-        test_run = true
-    }
-}
-
-tasks.cleanTest.dependsOn tasks.run_test
-classes.dependsOn.clear()
-classes.dependsOn tasks.make_images
-tasks.cleanClasses.dependsOn tasks.make_clean

jb/project/tools/common/modules.list

@@ -1,54 +0,0 @@
-java.base,
-java.compiler,
-java.datatransfer,
-java.desktop,
-java.instrument,
-java.logging,
-java.management,
-java.management.rmi,
-java.naming,
-java.net.http,
-java.prefs,
-java.rmi,
-java.scripting,
-java.se,
-java.security.jgss,
-java.security.sasl,
-java.smartcardio,
-java.sql,
-java.sql.rowset,
-java.transaction.xa,
-java.xml,
-java.xml.crypto,
-jdk.accessibility,
-jdk.attach,
-jdk.charsets,
-jdk.compiler,
-jdk.crypto.cryptoki,
-jdk.crypto.ec,
-jdk.dynalink,
-jdk.httpserver,
-jdk.internal.ed,
-jdk.internal.le,
-jdk.internal.vm.ci,
-jdk.javadoc,
-jdk.jdi,
-jdk.jdwp.agent,
-jdk.jfr,
-jdk.jsobject,
-jdk.localedata,
-jdk.management,
-jdk.management.agent,
-jdk.management.jfr,
-jdk.naming.dns,
-jdk.naming.rmi,
-jdk.net,
-jdk.sctp,
-jdk.security.auth,
-jdk.security.jgss,
-jdk.unsupported,
-jdk.unsupported.desktop,
-jdk.xml.dom,
-jdk.zipfs,
-jdk.hotspot.agent,
-jdk.jcmd

jb/project/tools/common/scripts/build-jbr-api.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-
-# $1 - Boot JDK
-# $2 - JBR part of API version
-
-cd "`dirname "$0"`/../../../../.."
-PWD="`pwd`"
-CONF="$PWD/build/jbr-api.conf"
-./configure --with-debug-level=release --with-boot-jdk=$1 || exit $?
-make jbr-api CONF=release MAKEOVERRIDES= "JBR_API_CONF_FILE=$CONF" JBR_API_JBR_VERSION=$2 || exit $?
-. $CONF || exit $?
-echo "##teamcity[buildNumber '$VERSION']"
-cp "$JAR" ./jbr-api-${VERSION}.jar || exit $?
-cp "$SOURCES_JAR" ./jbr-api-${VERSION}-sources.jar || exit $?
-echo "##teamcity[publishArtifacts '$PWD/jbr-api-${VERSION}.jar']"
-echo "##teamcity[publishArtifacts '$PWD/jbr-api-${VERSION}-sources.jar']"

jb/project/tools/common/scripts/common.sh

@@ -1,173 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-function check_bundle_type_maketest() {
-  # check whether last char is 't', if so remove it
-  if [ "${bundle_type: -1}" == "t" ]; then
-    bundle_type="${bundle_type%?}"
-    do_maketest=1
-  else
-    do_maketest=0
-  fi
-}
-
-function getVersionProp() {
-  grep "^${1}" make/conf/version-numbers.conf | cut -d'=' -f2
-}
-
-while getopts ":i?" o; do
-    case "${o}" in
-        i) INC_BUILD=1 ;;
-    esac
-done
-shift $((OPTIND-1))
-
-if [[ $# -lt 2 ]]; then
-  echo "Required at least two arguments: build_number bundle_type"
-  exit 1
-fi
-
-build_number=$1
-bundle_type=$2
-# shellcheck disable=SC2034
-architecture=${3:-x64} # aarch64 or x64
-
-check_bundle_type_maketest
-
-tag_prefix="jbr-"
-OPENJDK_TAG=$(git log --simplify-by-decoration --decorate=short --pretty=short | grep "$tag_prefix" | cut -d "(" -f2 | cut -d ")" -f1 | awk '{print $2}' | sort -t "-" -k 2 -g | tail -n 1 | tr -d ",")
-VERSION_FEATURE=$(getVersionProp "DEFAULT_VERSION_FEATURE")
-VERSION_INTERIM=$(getVersionProp "DEFAULT_VERSION_INTERIM")
-VERSION_UPDATE=$(getVersionProp "DEFAULT_VERSION_UPDATE")
-VERSION_PATCH=$(getVersionProp "DEFAULT_VERSION_PATCH")
-[[ $VERSION_UPDATE = 0 ]] && JBSDK_VERSION="$VERSION_FEATURE" || JBSDK_VERSION="${VERSION_FEATURE}.${VERSION_INTERIM}.${VERSION_UPDATE}"
-[[ $VERSION_PATCH = 0 ]] || JBSDK_VERSION="${VERSION_FEATURE}.${VERSION_INTERIM}.${VERSION_UPDATE}.${VERSION_PATCH}"
-echo "##teamcity[setParameter name='env.JBSDK_VERSION' value='${JBSDK_VERSION}']"
-JDK_BUILD_NUMBER=${JDK_BUILD_NUMBER:=$(echo $OPENJDK_TAG | awk -F "-|[+]" '{print $3}')}
-[ -z $JDK_BUILD_NUMBER ] && JDK_BUILD_NUMBER=1
-echo "##teamcity[setParameter name='env.JDK_UPDATE_NUMBER' value='${JDK_BUILD_NUMBER}']"
-
-VENDOR_NAME="JetBrains s.r.o."
-VENDOR_VERSION_STRING="JBR-${JBSDK_VERSION}+${JDK_BUILD_NUMBER}-${build_number}"
-[ -z "$bundle_type" ] || VENDOR_VERSION_STRING="${VENDOR_VERSION_STRING}-${bundle_type}"
-
-do_reset_changes=0
-do_reset_dcevm=0
-HEAD_REVISION=0
-
-STATIC_CONF_ARGS=""
-common_conf_props_file="jb/project/tools/common/static_conf_args.txt"
-if [[ -f "$common_conf_props_file" ]]; then
-    STATIC_CONF_ARGS=$(<$common_conf_props_file)
-fi
-OS_NAME=$(uname -s)
-# Enable reproducible builds
-TZ=UTC
-export TZ
-SOURCE_DATE_EPOCH="$(git log -1 --pretty=%ct)"
-export SOURCE_DATE_EPOCH
-USER=builduser
-export USER
-
-case "$OS_NAME" in
-    Linux)
-        COPYRIGHT_YEAR="$(date --utc --date=@$SOURCE_DATE_EPOCH +%Y)"
-        BUILD_TIME="$(date --utc --date=@$SOURCE_DATE_EPOCH +%F)"
-        REPRODUCIBLE_TAR_OPTS="--mtime=@$SOURCE_DATE_EPOCH --owner=0 --group=0 --numeric-owner --pax-option=exthdr.name=%d/PaxHeaders/%f,delete=atime,delete=ctime"
-        ;;
-    CYGWIN*)
-        COPYRIGHT_YEAR="$(date --utc --date=@$SOURCE_DATE_EPOCH +%Y)"
-        BUILD_TIME="$(date --utc --date=@$SOURCE_DATE_EPOCH +%F)"
-        REPRODUCIBLE_TAR_OPTS="--mtime=@$SOURCE_DATE_EPOCH --owner=0 --group=0 --numeric-owner --pax-option=exthdr.name=%d/PaxHeaders/%f,delete=atime,delete=ctime"
-        ;;
-    Darwin)
-        COPYRIGHT_YEAR="$(date -u -r $SOURCE_DATE_EPOCH +%Y)"
-        BUILD_TIME="$(date -u -r $SOURCE_DATE_EPOCH +%F)"
-        TOUCH_TIME="$(date -u -r $SOURCE_DATE_EPOCH +%Y%m%d%H%M.%S)"
-        REPRODUCIBLE_TAR_OPTS="--uid 0 --gid 0 --numeric-owner"
-        ;;
-esac
-
-WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS="--with-native-debug-symbols=zipped"
-
-REPRODUCIBLE_BUILD_OPTS="--enable-reproducible-build
-  --with-source-date=$SOURCE_DATE_EPOCH
-  --with-hotspot-build-time=$BUILD_TIME
-  --with-copyright-year=$COPYRIGHT_YEAR
-  --disable-absolute-paths-in-output"
-
-function zip_native_debug_symbols() {
-  image_bundle_path=$(echo $1 | cut -d"/" -f-4)
-  jdk_name=$(echo $1 | cut -d"/" -f5)
-  jbr_diz_name=$2
-
-  [ -d "dizfiles" ] && rm -rf dizfiles
-  mkdir dizfiles
-
-  rsync_target="../../../../dizfiles"
-  [ -z "$jdk_name" ] && rsync_target=$rsync_target"/"$jbr_diz_name
-  (cd $image_bundle_path && find . -name '*.diz' -exec rsync -R {} $rsync_target \;)
-  [ ! -z "$jdk_name" ] && mv dizfiles/$jdk_name dizfiles/$jbr_diz_name
-
-  (cd dizfiles && find $jbr_diz_name -print0 | COPYFILE_DISABLE=1 \
-    tar --no-recursion --null -T - -czf ../"$jbr_diz_name".tar.gz) || do_exit $?
-}
-
-function do_exit() {
-  exit_code=$1
-  [ $do_reset_changes -eq 1 ] && git checkout HEAD jb/project/tools/common/modules.list src/java.desktop/share/classes/module-info.java
-  if [ $do_reset_dcevm -eq 1 ]; then
-    [ ! -z $HEAD_REVISION ] && git reset --hard $HEAD_REVISION
-  fi
-  exit "$exit_code"
-}
-
-function update_jsdk_mods() {
-  __jsdk=$1
-  __jcef_mods=$2
-  __orig_jsdk_mods=$3
-  __updated_jsdk_mods=$4
-  
-  # re-create java.desktop.jmod with updated module-info.class
-  tmp=.java.desktop.$$.tmp
-  mkdir "$tmp" || exit $?
-  "$__jsdk"/bin/jmod extract --dir "$tmp" "$__orig_jsdk_mods"/java.desktop.jmod || exit $?
-  "$__jsdk"/bin/javac \
-      --patch-module java.desktop="$__orig_jsdk_mods"/java.desktop.jmod \
-      --module-path "$__jcef_mods" -d "$tmp"/classes src/java.desktop/share/classes/module-info.java || exit $?
-  "$__jsdk"/bin/jmod \
-      create --class-path "$tmp"/classes --config "$tmp"/conf --header-files "$tmp"/include --legal-notice "$tmp"/legal --libs "$tmp"/lib \
-      java.desktop.jmod || exit $?
-  mv java.desktop.jmod "$__updated_jsdk_mods" || exit $?
-  rm -rf "$tmp"
-  
-  # re-create java.base.jmod with updated hashes
-  tmp=.java.base.$$.tmp
-  mkdir "$tmp" || exit $?
-  hash_modules=$("$__jsdk"/bin/jmod describe "$__orig_jsdk_mods"/java.base.jmod | grep hashes | awk '{print $2}' | tr '\n' '|' | sed s/\|$//) || exit $?
-  "$__jsdk"/bin/jmod extract --dir "$tmp" "$__orig_jsdk_mods"/java.base.jmod || exit $?
-  rm "$__updated_jsdk_mods"/java.base.jmod || exit $? # temp exclude from path
-  "$__jsdk"/bin/jmod \
-      create --module-path "$__updated_jsdk_mods" --hash-modules "$hash_modules" \
-      --class-path "$tmp"/classes --cmds "$tmp"/bin --config "$tmp"/conf --header-files "$tmp"/include --legal-notice "$tmp"/legal --libs "$tmp"/lib \
-      java.base.jmod || exit $?
-  mv java.base.jmod "$__updated_jsdk_mods" || exit $?
-  rm -rf "$tmp"
-}
-
-function get_mods_list() {
-  __mods=$1
-  echo $(ls $__mods) | sed s/\.jmod/,/g | sed s/,$//g | sed s/' '//g
-}
-
-function copy_jmods() {
-  __mods_list=$1
-  __jmods_from=$2
-  __jmods_to=$3
-
-  mkdir -p $__jmods_to
-
-  echo "${__mods_list}," | while read -d, mod; do cp $__jmods_from/$mod.jmod $__jmods_to/; done
-}

jb/project/tools/common/static_conf_args.txt

@@ -1 +0,0 @@
---with-vendor-vm-bug-url=https://youtrack.jetbrains.com/issues/JBR

jb/project/tools/linux/scripts/mkimages_aarch64.sh

@@ -1,165 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script makes test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-# Environment variables:
-#   JDK_BUILD_NUMBER - specifies update release of OpenJDK build or the value of --with-version-build argument
-#               to configure
-#               By default JDK_BUILD_NUMBER is set zero
-#   JCEF_PATH - specifies the path to the directory with JCEF binaries.
-#               By default JCEF binaries should be located in ./jcef_linux_aarch64
-
-source jb/project/tools/common/scripts/common.sh
-
-JCEF_PATH=${JCEF_PATH:=./jcef_linux_aarch64}
-
-function do_configure {
-  sh configure \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build="$JDK_BUILD_NUMBER" \
-    --with-version-opt=b"$build_number" \
-    --with-boot-jdk="$BOOT_JDK" \
-    --enable-cds=yes \
-    $STATIC_CONF_ARGS \
-    $REPRODUCIBLE_BUILD_OPTS \
-    $WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS \
-    || do_exit $?
-}
-
-function is_musl {
-  libc=$(ldd /bin/ls | grep 'musl' | head -1 | cut -d ' ' -f1)
-  if [ -z $libc ]; then
-    # This is not Musl, return 1 == false
-    return 1
-  fi
-  return 0
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  libc_type_suffix=''
-  fastdebug_infix=''
-
-  if is_musl; then libc_type_suffix='musl-' ; fi
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}aarch64-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}aarch64-${fastdebug_infix:-}b${build_number}
-
-
-  echo Running jlink....
-  [ -d "$IMAGES_DIR"/"$__root_dir" ] && rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-  $JSDK/bin/jlink \
-    --module-path "$__modules_path" --no-man-pages --compress=2 \
-    --add-modules "$__modules" --output "$IMAGES_DIR"/"$__root_dir"
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> "$IMAGES_DIR"/"$__root_dir"/release
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' "$IMAGES_DIR"/"$__root_dir"/release > release
-    mv release "$IMAGES_DIR"/"$__root_dir"/release
-    cp $IMAGES_DIR/jdk/lib/src.zip "$IMAGES_DIR"/"$__root_dir"/lib
-    copy_jmods "$__modules" "$__modules_path" "$IMAGES_DIR"/"$__root_dir"/jmods
-    zip_native_debug_symbols $IMAGES_DIR/jdk "${JBR}_diz"
-  fi
-
-  # jmod does not preserve file permissions (JDK-8173610)
-  [ -f "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper ] && chmod a+x "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper
-
-  echo Creating "$JBR".tar.gz ...
-
-  (cd "$IMAGES_DIR" &&
-    find "$__root_dir" -print0 | LC_ALL=C sort -z | \
-    tar $REPRODUCIBLE_TAR_OPTS \
-      --no-recursion --null -T - -cf "$JBR".tar) || do_exit $?
-  mv "$IMAGES_DIR"/"$JBR".tar ./"$JBR".tar
-  [ -f "$JBR".tar.gz ] && rm "$JBR.tar.gz"
-  touch -c -d "@$SOURCE_DATE_EPOCH" "$JBR".tar
-  gzip "$JBR".tar || do_exit $?
-  rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=linux-aarch64-server-release
-
-case "$bundle_type" in
-  "jcef")
-    do_reset_changes=1
-    do_maketest=1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=1
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=linux-aarch64-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  make clean CONF=$RELEASE_NAME || do_exit $?
-fi
-make images CONF=$RELEASE_NAME || do_exit $?
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-echo Fixing permissions
-chmod -R a+r $JSDK
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module_aarch64.patch || do_exit $?
-  update_jsdk_mods $JSDK $JCEF_PATH/jmods $JSDK/jmods $JSDK_MODS_DIR || do_exit $?
-  cp $JCEF_PATH/jmods/* $JSDK_MODS_DIR # $JSDK/jmods is not changed
-
-  jbr_name_postfix="_${bundle_type}"
-  cat $JCEF_PATH/jcef.version >> $JSDK/release
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(xargs < jb/project/tools/common/modules.list | sed s/" "//g) || do_exit $?
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat $JSDK/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\n//g) || do_exit $?
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" $JBRSDK_BUNDLE $JSDK_MODS_DIR "$modules" || do_exit $?
-
-if [ $do_maketest -eq 1 ]; then
-    JBRSDK_TEST=${JBRSDK_BUNDLE}-${JBSDK_VERSION}-linux-${libc_type_suffix}test-aarch64-b${build_number}
-    echo Creating "$JBRSDK_TEST" ...
-    [ $do_reset_changes -eq 1 ] && git checkout HEAD jb/project/tools/common/modules.list src/java.desktop/share/classes/module-info.java
-    make test-image jbr-api CONF=$RELEASE_NAME JBR_API_JBR_VERSION=TEST || do_exit $?
-    cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test"
-    tar -pcf "$JBRSDK_TEST".tar -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-    [ -f "$JBRSDK_TEST.tar.gz" ] && rm "$JBRSDK_TEST.tar.gz"
-    gzip "$JBRSDK_TEST".tar || do_exit $?
-fi
-
-do_exit 0

jb/project/tools/linux/scripts/mkimages_x64.sh

@@ -1,164 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script makes test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-# Environment variables:
-#   JDK_BUILD_NUMBER - specifies update release of OpenJDK build or the value of --with-version-build argument
-#               to configure
-#               By default JDK_BUILD_NUMBER is set zero
-#   JCEF_PATH - specifies the path to the directory with JCEF binaries.
-#               By default JCEF binaries should be located in ./jcef_linux_x64
-
-source jb/project/tools/common/scripts/common.sh
-
-JCEF_PATH=${JCEF_PATH:=./jcef_linux_x64}
-
-function do_configure {
-  sh configure \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build="$JDK_BUILD_NUMBER" \
-    --with-version-opt=b"$build_number" \
-    --with-boot-jdk="$BOOT_JDK" \
-    --enable-cds=yes \
-    $STATIC_CONF_ARGS \
-    $REPRODUCIBLE_BUILD_OPTS \
-    $WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS \
-    || do_exit $?
-}
-
-function is_musl {
-  libc=$(ldd /bin/ls | grep 'musl' | head -1 | cut -d ' ' -f1)
-  if [ -z $libc ]; then
-    # This is not Musl, return 1 == false
-    return 1
-  fi
-  return 0
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  libc_type_suffix=''
-  fastdebug_infix=''
-
-  if is_musl; then libc_type_suffix='musl-' ; fi
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}x64-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}x64-${fastdebug_infix:-}b${build_number}
-
-  echo Running jlink....
-  [ -d "$IMAGES_DIR"/"$__root_dir" ] && rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-  $JSDK/bin/jlink \
-    --module-path "$__modules_path" --no-man-pages --compress=2 \
-    --add-modules "$__modules" --output "$IMAGES_DIR"/"$__root_dir"
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> "$IMAGES_DIR"/"$__root_dir"/release
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' "$IMAGES_DIR"/"$__root_dir"/release > release
-    mv release "$IMAGES_DIR"/"$__root_dir"/release
-    cp $IMAGES_DIR/jdk/lib/src.zip "$IMAGES_DIR"/"$__root_dir"/lib
-    copy_jmods "$__modules" "$__modules_path" "$IMAGES_DIR"/"$__root_dir"/jmods
-    zip_native_debug_symbols $IMAGES_DIR/jdk "${JBR}_diz"
-  fi
-
-  # jmod does not preserve file permissions (JDK-8173610)
-  [ -f "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper ] && chmod a+x "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper
-
-  echo Creating "$JBR".tar.gz ...
-
-  (cd "$IMAGES_DIR" &&
-    find "$__root_dir" -print0 | LC_ALL=C sort -z | \
-    tar $REPRODUCIBLE_TAR_OPTS \
-      --no-recursion --null -T - -cf "$JBR".tar) || do_exit $?
-  mv "$IMAGES_DIR"/"$JBR".tar ./"$JBR".tar
-  [ -f "$JBR".tar.gz ] && rm "$JBR.tar.gz"
-  touch -c -d "@$SOURCE_DATE_EPOCH" "$JBR".tar
-  gzip "$JBR".tar || do_exit $?
-  #rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=linux-x86_64-server-release
-
-case "$bundle_type" in
-  "jcef")
-    do_reset_changes=1
-    do_maketest=1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=1
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=linux-x86_64-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  make clean CONF=$RELEASE_NAME || do_exit $?
-fi
-make images CONF=$RELEASE_NAME || do_exit $?
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-echo Fixing permissions
-chmod -R a+r $JSDK
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module.patch || do_exit $?
-  update_jsdk_mods $JSDK $JCEF_PATH/jmods $JSDK/jmods $JSDK_MODS_DIR || do_exit $?
-  cp $JCEF_PATH/jmods/* $JSDK_MODS_DIR # $JSDK/jmods is not changed
-
-  jbr_name_postfix="_${bundle_type}"
-  cat $JCEF_PATH/jcef.version >> $JSDK/release
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(xargs < jb/project/tools/common/modules.list | sed s/" "//g) || do_exit $?
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat $JSDK/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\n//g) || do_exit $?
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" $JBRSDK_BUNDLE $JSDK_MODS_DIR "$modules" || do_exit $?
-
-if [ $do_maketest -eq 1 ]; then
-    JBRSDK_TEST=${JBRSDK_BUNDLE}-${JBSDK_VERSION}-linux-${libc_type_suffix}test-x64-b${build_number}
-    echo Creating "$JBRSDK_TEST" ...
-    [ $do_reset_changes -eq 1 ] && git checkout HEAD jb/project/tools/common/modules.list src/java.desktop/share/classes/module-info.java
-    make test-image jbr-api CONF=$RELEASE_NAME JBR_API_JBR_VERSION=TEST || do_exit $?
-    cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test"
-    tar -pcf "$JBRSDK_TEST".tar -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-    [ -f "$JBRSDK_TEST.tar.gz" ] && rm "$JBRSDK_TEST.tar.gz"
-    gzip "$JBRSDK_TEST".tar || do_exit $?
-fi
-
-do_exit 0

jb/project/tools/linux/scripts/mkimages_x86.sh

@@ -1,144 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-
-source jb/project/tools/common/scripts/common.sh
-
-function do_configure {
-  linux32 bash configure \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build="$JDK_BUILD_NUMBER" \
-    --with-version-opt=b"$build_number" \
-    --with-boot-jdk="$BOOT_JDK" \
-    $STATIC_CONF_ARGS \
-    --enable-cds=yes \
-    $REPRODUCIBLE_BUILD_OPTS \
-    $WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS \
-    || do_exit $?
-}
-
-function is_musl {
-  libc=$(ldd /bin/ls | grep 'musl' | head -1 | cut -d ' ' -f1)
-  if [ -z $libc ]; then
-    # This is not Musl, return 1 == false
-    return 1
-  fi
-  return 0
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  libc_type_suffix=''
-  fastdebug_infix=''
-
-  if is_musl; then libc_type_suffix='musl-' ; fi
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}x86-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-linux-${libc_type_suffix}x86-${fastdebug_infix:-}b${build_number}
-
-  echo Running jlink....
-  [ -d "$IMAGES_DIR"/"$__root_dir" ] && rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-  $JSDK/bin/jlink \
-    --module-path "$__modules_path" --no-man-pages --compress=2 \
-    --add-modules "$__modules" --output "$IMAGES_DIR"/"$__root_dir"
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> "$IMAGES_DIR"/"$__root_dir"/release
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' "$IMAGES_DIR"/"$__root_dir"/release > release
-    mv release "$IMAGES_DIR"/"$__root_dir"/release
-    cp $IMAGES_DIR/jdk/lib/src.zip "$IMAGES_DIR"/"$__root_dir"/lib
-    copy_jmods "$__modules" "$__modules_path" "$IMAGES_DIR"/"$__root_dir"/jmods
-    zip_native_debug_symbols $IMAGES_DIR/jdk "${JBR}_diz"
-  fi
-
-  # jmod does not preserve file permissions (JDK-8173610)
-  [ -f "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper ] && chmod a+x "$IMAGES_DIR"/"$__root_dir"/lib/jcef_helper
-
-  echo Creating "$JBR".tar.gz ...
-
-  (cd "$IMAGES_DIR" &&
-    find "$__root_dir" -print0 | LC_ALL=C sort -z | \
-    tar $REPRODUCIBLE_TAR_OPTS \
-      --no-recursion --null -T - -cf "$JBR".tar) || do_exit $?
-  mv "$IMAGES_DIR"/"$JBR".tar ./"$JBR".tar
-  [ -f "$JBR".tar.gz ] && rm "$JBR.tar.gz"
-  touch -c -d "@$SOURCE_DATE_EPOCH" "$JBR".tar
-  gzip "$JBR".tar || do_exit $?
-  rm -rf "${IMAGES_DIR:?}"/"$__root_dir"
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=linux-x86-server-release
-
-case "$bundle_type" in
-  "jcef")
-    echo "not implemented" && do_exit 1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=1
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=linux-x86-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  make clean CONF=$RELEASE_NAME || do_exit $?
-fi
-make images CONF=$RELEASE_NAME || do_exit $?
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-echo Fixing permissions
-chmod -R a+r $JSDK
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(grep -v "jdk.internal.vm" jb/project/tools/common/modules.list | xargs | sed s/" "//g) || do_exit $?
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat $JSDK/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\n//g) || do_exit $?
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" $JBRSDK_BUNDLE $JSDK_MODS_DIR "$modules" || do_exit $?
-
-if [ $do_maketest -eq 1 ]; then
-    JBRSDK_TEST=${JBRSDK_BUNDLE}-${JBSDK_VERSION}-linux-${libc_type_suffix}test-x86-b${build_number}
-    echo Creating "$JBRSDK_TEST" ...
-    [ $do_reset_changes -eq 1 ] && git checkout HEAD jb/project/tools/common/modules.list src/java.desktop/share/classes/module-info.java
-    make test-image jbr-api CONF=$RELEASE_NAME JBR_API_JBR_VERSION=TEST || do_exit $?
-    cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test"
-    tar -pcf "$JBRSDK_TEST".tar -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-    [ -f "$JBRSDK_TEST.tar.gz" ] && rm "$JBRSDK_TEST.tar.gz"
-    gzip "$JBRSDK_TEST".tar || do_exit $?
-fi
-
-do_exit 0

jb/project/tools/mac/scripts/codesign.sh

@@ -1,47 +0,0 @@
-#!/bin/bash
-SCRIPT_DIR="$(cd "$(dirname "$0")" >/dev/null && pwd)"
-
-source "$SCRIPT_DIR/jetsign-common.sh" || exit 1
-
-function isMacOsBinary() {
-  file "$1" | grep -q 'Mach-O'
-}
-
-function isSigned() {
-  codesign --verify "$1" >/dev/null 2>&1 && ! grep -q Signature=adhoc < <(codesign --display --verbose "$1" 2>&1)
-}
-
-# last argument is a path to be signed
-pathToBeSigned="$(pwd)/${*: -1}"
-jetSignArgs=("${@:1:$#-1}")
-if [[ ! -f "$pathToBeSigned" ]]; then
-  echo "$pathToBeSigned is missing or not a file"
-  exit 1
-elif isSigned "$pathToBeSigned" && ! isForced "${jetSignArgs[@]}" ; then
-  echo "Already signed: $pathToBeSigned"
-elif [[ "$JETSIGN_CLIENT" == "null" ]]; then
-  echo "JetSign client is missing, cannot proceed with signing"
-  exit 1
-elif ! isMacOsBinary "$pathToBeSigned" && [[ "$pathToBeSigned" != *.sit ]] && [[ "$pathToBeSigned" != *.tar.gz ]]; then
-  echo "$pathToBeSigned won't be signed, assumed not to be a macOS executable"
-else
-  if isMacOsBinary "$pathToBeSigned" && ! isSigned "$pathToBeSigned" ; then
-    echo "Unsigned macOS binary: $pathToBeSigned"
-  fi
-  workDir=$(dirname "$pathToBeSigned")
-  pathSigned="$workDir/signed/${pathToBeSigned##*/}"
-  jetSignExtensions=$(jetSignExtensions "${jetSignArgs[@]}")
-  contentType=$(jetSignContentType "$pathToBeSigned")
-  (
-    cd "$workDir" || exit 1
-    "$JETSIGN_CLIENT" -log-format text -denoted-content-type "$contentType" -extensions "$jetSignExtensions" "$pathToBeSigned"
-    # SRE-1223 (Codesign removes execute bits in executable files) workaround
-    chmod "$(stat -f %A "$pathToBeSigned")" "$pathSigned"
-    if isMacOsBinary "$pathSigned"; then
-      isSigned "$pathSigned"
-    fi
-    rm "$pathToBeSigned"
-    mv "$pathSigned" "$pathToBeSigned"
-    rm -rf "$workDir/signed"
-  )
-fi

jb/project/tools/mac/scripts/entitlements.xml

@@ -1,16 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-    <dict>
-        <key>com.apple.security.cs.allow-jit</key>
-        <true/>
-        <key>com.apple.security.cs.allow-unsigned-executable-memory</key>
-        <true/>
-        <key>com.apple.security.cs.allow-dyld-environment-variables</key>
-        <true/>
-        <key>com.apple.security.cs.disable-library-validation</key>
-        <true/>
-        <key>com.apple.security.cs.disable-executable-page-protection</key>
-        <true/>
-    </dict>
-</plist>

jb/project/tools/mac/scripts/jetsign-common.sh

@@ -1,63 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-function isForced() {
-  for arg in "$@"; do
-    if [[ "$arg" == --force ]]; then
-      return 0
-    fi
-  done
-  return 1
-}
-
-function jetSignExtensions() {
-  args=("$@")
-  ((lastElementIndex=${#args[@]}-1))
-  for index in "${!args[@]}"; do
-    arg=${args[$index]}
-    case "$arg" in
-    --sign | -s)
-      echo -n 'mac_codesign_identity='
-      continue
-      ;;
-    --entitlements)
-      echo -n 'mac_codesign_entitlements='
-      continue
-      ;;
-    --options=runtime)
-      echo -n 'mac_codesign_options=runtime'
-      ;;
-    --force)
-      echo -n 'mac_codesign_force=true'
-      ;;
-    --timestamp | --verbose | -v)
-      continue
-      ;;
-    *)
-      echo -n "$arg"
-      ;;
-    esac
-    if [[ $index != "$lastElementIndex" ]]; then
-      echo -n ","
-    fi
-  done
-}
-
-# See jetbrains.sign.util.FileUtil.contentType
-function jetSignContentType() {
-  case "${1##*/}" in
-  *.sit)
-    echo -n 'application/x-mac-app-zip'
-    ;;
-  *.tar.gz)
-    echo -n 'application/x-mac-app-targz'
-    ;;
-  *.pkg)
-    echo -n 'application/x-mac-pkg'
-    ;;
-  *)
-    echo -n 'application/x-mac-app-bin'
-    ;;
-  esac
-}
-

jb/project/tools/mac/scripts/mkimages.sh

@@ -1,191 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script makes test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-# Environment variables:
-#   JDK_BUILD_NUMBER - specifies update release of OpenJDK build or the value of --with-version-build argument
-#               to configure
-#               By default JDK_BUILD_NUMBER is set zero
-#   JCEF_PATH - specifies the path to the directory with JCEF binaries.
-#               By default JCEF binaries should be located in ./jcef_mac
-#   MACOSX_VERSION_MAX - specifies value for the --with-macosx-version-max parameter. By default it is 10.12.00 for x64
-#               and 11.00.00 for aarch64
-
-source jb/project/tools/common/scripts/common.sh
-
-JCEF_PATH=${JCEF_PATH:=./jcef_mac}
-BOOT_JDK=${BOOT_JDK:=$(/usr/libexec/java_home -v 16)}
-
-function do_configure {
-  if [[ "${architecture}" == *aarch64* ]]; then
-
-    sh configure \
-      $WITH_DEBUG_LEVEL \
-      --with-vendor-name="${VENDOR_NAME}" \
-      --with-vendor-version-string="${VENDOR_VERSION_STRING}" \
-      --with-macosx-bundle-name-base=${VENDOR_VERSION_STRING} \
-      --with-macosx-bundle-id-base="com.jetbrains.jbr" \
-      --with-jvm-features=shenandoahgc \
-      --with-version-pre= \
-      --with-version-build="${JDK_BUILD_NUMBER}" \
-      --with-version-opt=b"${build_number}" \
-      --with-boot-jdk="$BOOT_JDK" \
-      --with-macosx-version-max="${MACOSX_VERSION_MAX:="11.00.00"}" \
-      --disable-hotspot-gtest --disable-javac-server --disable-full-docs --disable-manpages \
-      --enable-cds=no \
-      $STATIC_CONF_ARGS \
-      $REPRODUCIBLE_BUILD_OPTS \
-      $WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS \
-      || do_exit $?
-  else
-    sh configure \
-      $WITH_DEBUG_LEVEL \
-      --with-vendor-name="$VENDOR_NAME" \
-      --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-      --with-macosx-bundle-name-base=${VENDOR_VERSION_STRING} \
-      --with-macosx-bundle-id-base="com.jetbrains.jbr" \
-      --with-jvm-features=shenandoahgc \
-      --with-version-pre= \
-      --with-version-build="$JDK_BUILD_NUMBER" \
-      --with-version-opt=b"$build_number" \
-      --with-boot-jdk="$BOOT_JDK" \
-      --with-macosx-version-max="${MACOSX_VERSION_MAX:="10.12.00"}" \
-      --enable-cds=yes \
-      $STATIC_CONF_ARGS \
-      $REPRODUCIBLE_BUILD_OPTS \
-      $WITH_ZIPPED_NATIVE_DEBUG_SYMBOLS \
-      || do_exit $?
-  fi
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  fastdebug_infix=''
-
-  tmp=.bundle.$$.tmp
-  mkdir "$tmp" || do_exit $?
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-osx-${architecture}-${fastdebug_infix:-}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-osx-${architecture}-${fastdebug_infix:-}b${build_number}
-
-  JRE_CONTENTS=$tmp/$__root_dir/Contents
-  mkdir -p "$JRE_CONTENTS" || do_exit $?
-
-  echo Running jlink...
-  "$JSDK"/bin/jlink \
-    --module-path "$__modules_path" --no-man-pages --compress=2 \
-    --add-modules "$__modules" --output "$JRE_CONTENTS/Home" || do_exit $?
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> "$JRE_CONTENTS/Home/release"
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' $JRE_CONTENTS/Home/release > release
-    mv release $JRE_CONTENTS/Home/release
-    cp $IMAGES_DIR/jdk-bundle/jdk-$JBSDK_VERSION.jdk/Contents/Home/lib/src.zip $JRE_CONTENTS/Home/lib
-    copy_jmods "$__modules" "$__modules_path" "$JRE_CONTENTS"/Home/jmods
-    zip_native_debug_symbols $IMAGES_DIR/jdk-bundle/jdk-$JBSDK_VERSION.jdk "${JBR}_diz"
-  fi
-
-  if [ "$bundle_type" == "jcef" ]; then
-    cat $JCEF_PATH/jcef.version >> "$JRE_CONTENTS/Home/release"
-  fi
-
-  cp -R "$JSDK"/../MacOS "$JRE_CONTENTS"
-  cp "$JSDK"/../Info.plist "$JRE_CONTENTS"
-
-  [ -n "$bundle_type" ] && (cp -a $JCEF_PATH/Frameworks "$JRE_CONTENTS" || do_exit $?)
-
-  echo Creating "$JBR".tar.gz ...
-  # Normalize timestamp
-  find "$tmp"/"$__root_dir" -print0 | xargs -0 touch -c -h -t "$TOUCH_TIME"
-
-  (cd "$tmp" &&
-      find "$__root_dir" -print0 | LC_ALL=C sort -z | \
-      COPYFILE_DISABLE=1 tar $REPRODUCIBLE_TAR_OPTS  --no-recursion --null -T - \
-                             -czf "$JBR".tar.gz --exclude='*.dSYM' --exclude='man') || do_exit $?
-  mv "$tmp"/"$JBR".tar.gz  "$JBR".tar.gz
-  rm -rf "$tmp"
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-CONF_ARCHITECTURE=x86_64
-if [[ "${architecture}" == *aarch64* ]]; then
-  CONF_ARCHITECTURE=aarch64
-fi
-RELEASE_NAME=macosx-${CONF_ARCHITECTURE}-server-release
-
-case "$bundle_type" in
-  "jcef")
-    do_reset_changes=1
-    do_maketest=1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=1
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=macosx-${CONF_ARCHITECTURE}-server-fastdebug
-    JBSDK=macosx-${architecture}-server-release
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  make clean CONF=$RELEASE_NAME || do_exit $?
-fi
-make images CONF=$RELEASE_NAME || do_exit $?
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-
-JSDK=$IMAGES_DIR/jdk-bundle/jdk-$JBSDK_VERSION.jdk/Contents/Home
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module.patch || do_exit $?
-  update_jsdk_mods "$JSDK" "$JCEF_PATH"/jmods "$JSDK"/jmods "$JSDK_MODS_DIR" || do_exit $?
-  cp $JCEF_PATH/jmods/* $JSDK_MODS_DIR # $JSDK/jmods is not changed
-
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(xargs < jb/project/tools/common/modules.list | sed s/" "//g) || do_exit $?
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat "$JSDK"/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\n//g) || do_exit $?
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" "$JBRSDK_BUNDLE" "$JSDK_MODS_DIR" "$modules" || do_exit $?
-
-if [ $do_maketest -eq 1 ]; then
-    JBRSDK_TEST=${JBRSDK_BUNDLE}-${JBSDK_VERSION}-osx-test-${architecture}-b${build_number}
-    echo Creating "$JBRSDK_TEST" ...
-    [ $do_reset_changes -eq 1 ] && git checkout HEAD jb/project/tools/common/modules.list src/java.desktop/share/classes/module-info.java
-    make test-image jbr-api CONF=$RELEASE_NAME JBR_API_JBR_VERSION=TEST || do_exit $?
-    cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test"
-    [ -f "$JBRSDK_TEST.tar.gz" ] && rm "$JBRSDK_TEST.tar.gz"
-    COPYFILE_DISABLE=1 tar -pczf "$JBRSDK_TEST".tar.gz -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-fi
-
-do_exit 0

jb/project/tools/mac/scripts/notarize.sh

@@ -1,40 +0,0 @@
-#!/bin/bash
-
-#immediately exit script with an error if a command fails
-set -euo pipefail
-[[ "${SCRIPT_VERBOSE:-}" == "1" ]] && set -x
-
-APP_PATH=$1
-
-if [[ -z "$APP_PATH" ]]; then
-  echo "Usage: $0 AppPath"
-  exit 1
-fi
-if [[ ! -f "$APP_PATH" ]]; then
-  echo "AppName '$APP_PATH' does not exist or not a file"
-  exit 1
-fi
-
-function log() {
-  echo "$(date '+[%H:%M:%S]') $*"
-}
-
-
-# check required parameters
-: "${APPLE_ISSUER_ID}"
-: "${APPLE_KEY_ID}"
-: "${APPLE_PRIVATE_KEY}"
-
-# shellcheck disable=SC2064
-trap "rm -f \"$PWD/tmp_key\"" INT EXIT RETURN
-echo -n "${APPLE_PRIVATE_KEY}" > tmp_key
-
-log "Notarizing $APP_PATH..."
-xcrun notarytool submit --key tmp_key --key-id "${APPLE_KEY_ID}" --issuer "${APPLE_ISSUER_ID}" "$APP_PATH" 2>&1 | tee "notarytool.submit.out"
-REQUEST_ID="$(grep -e " id: " "notarytool.submit.out" | grep -oE '([0-9a-f-]{36})'| head -n1)"
-
-xcrun notarytool wait "$REQUEST_ID" --key tmp_key --key-id "${APPLE_KEY_ID}" --issuer "${APPLE_ISSUER_ID}" --timeout 6h ||:
-xcrun notarytool log  "$REQUEST_ID" --key tmp_key --key-id "${APPLE_KEY_ID}" --issuer "${APPLE_ISSUER_ID}" developer_log.json ||:
-xcrun notarytool info "$REQUEST_ID" --key tmp_key --key-id "${APPLE_KEY_ID}" --issuer "${APPLE_ISSUER_ID}"
-
-log "Notarizing finished"

jb/project/tools/mac/scripts/productsign.sh

@@ -1,41 +0,0 @@
-#!/bin/bash
-SCRIPT_DIR="$(cd "$(dirname "$0")" >/dev/null && pwd)"
-
-source "$SCRIPT_DIR/jetsign-common.sh" || exit 1
-
-function isSigned() {
-  pkgutil --check-signature "$1" >/dev/null 2>&1 && grep -q "signed by a developer certificate" < <(pkgutil --check-signature "$1" 2>&1)
-}
-
-# second last argument is a path to be signed
-pathToBeSigned="$(pwd)/${*:(-2):1}"
-# last argument is a path to signed file
-pathOut="$(pwd)/${*:(-1)}"
-jetSignArgs=("${@:1:$#-2}")
-if [[ ! -f "$pathToBeSigned" ]]; then
-  echo "$pathToBeSigned is missing or not a file"
-  exit 1
-elif isSigned "$pathToBeSigned" && ! isForced "${jetSignArgs[@]}" ; then
-  echo "Already signed: $pathToBeSigned"
-elif [[ "$JETSIGN_CLIENT" == "null" ]]; then
-  echo "JetSign client is missing, cannot proceed with signing"
-  exit 1
-elif [[ "$pathToBeSigned" != *.pkg ]]; then
-  echo "$pathToBeSigned won't be signed, assumed not to be a macOS package"
-else
-  if ! isSigned "$pathToBeSigned" ; then
-    echo "Unsigned macOS package: $pathToBeSigned"
-  fi
-  workDir=$(dirname "$pathToBeSigned")
-  pathSigned="$workDir/signed/${pathToBeSigned##*/}"
-  jetSignExtensions=$(jetSignExtensions "${jetSignArgs[@]}")
-  contentType=$(jetSignContentType "$pathToBeSigned")
-  (
-    cd "$workDir" || exit 1
-    "$JETSIGN_CLIENT" -log-format text -denoted-content-type "$contentType" -extensions "$jetSignExtensions" "$pathToBeSigned"
-    isSigned "$pathSigned"
-    rm -f "$pathOut"
-    mv "$pathSigned" "$pathOut"
-    rm -rf "$workDir/signed"
-  )
-fi

jb/project/tools/mac/scripts/sign.sh

@@ -1,162 +0,0 @@
-#!/bin/bash
-
-#immediately exit script with an error if a command fails
-set -euo pipefail
-[[ "${SCRIPT_VERBOSE:-}" == "1" ]] && set -x
-
-if [[ $# -lt 5  ]]; then
-  echo "Usage: $0 AppDirectory AppName BundleId CertificateID InstallerCertificateID"
-  exit 1
-fi
-
-APPLICATION_PATH=$1
-PKG_NAME=$2
-BUNDLE_ID=$3
-JB_DEVELOPER_CERT=$4
-JB_INSTALLER_CERT=$5
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" >/dev/null && pwd)"
-
-# Use JetBrains sign utility if it's available
-if [[ "${JETSIGN_CLIENT:=}" == "null" ]] || [[ "$JETSIGN_CLIENT" == "" ]]; then
-  JB_SIGN=false
-  SIGN_UTILITY="codesign"
-  PRODUCTSIGN_UTILITY="productsign"
-else
-  JB_SIGN=true
-  SIGN_UTILITY="$SCRIPT_DIR/codesign.sh"
-  PRODUCTSIGN_UTILITY="$SCRIPT_DIR/productsign.sh"
-fi
-
-if [[ ! -d "$APPLICATION_PATH" ]]; then
-  echo "AppDirectory '$APPLICATION_PATH' does not exist or not a directory"
-  exit 1
-fi
-
-function log() {
-  echo "$(date '+[%H:%M:%S]') $*"
-}
-
-# Cleanup files left from previous sign attempt (if any)
-find "$APPLICATION_PATH" -name '*.cstemp' -exec rm '{}' \;
-
-log "Signing libraries and executables..."
-# -perm +111 searches for executables
-for f in \
-  "Contents/Home/lib" "Contents/MacOS" \
-  "Contents/Home/Frameworks" \
-  "Contents/Frameworks"; do
-  if [ -d "$APPLICATION_PATH/$f" ]; then
-    find "$APPLICATION_PATH/$f" \
-      -type f \( -name "*.jnilib" -o -name "*.dylib" -o -name "*.so" -o -name "*.tbd" -o -name "*.node" -o -perm +111 \) \
-      -exec "$SIGN_UTILITY" --timestamp \
-      -v -s "$JB_DEVELOPER_CERT" --options=runtime --force \
-      --entitlements "$SCRIPT_DIR/entitlements.xml" {} \;
-  fi
-done
-
-log "Signing libraries in jars in $APPLICATION_PATH"
-
-# todo: add set -euo pipefail; into the inner sh -c
-# `-e` prevents `grep -q && printf` loginc
-# with `-o pipefail` there's no input for 'while' loop
-find "$APPLICATION_PATH" -name '*.jar' \
-  -exec sh -c "set -u; unzip -l \"\$0\" | grep -q -e '\.dylib\$' -e '\.jnilib\$' -e '\.so\$' -e '\.tbd\$' -e '^jattach\$' && printf \"\$0\0\" " {} \; |
-  while IFS= read -r -d $'\0' file; do
-    log "Processing libraries in $file"
-
-    rm -rf jarfolder jar.jar
-    mkdir jarfolder
-    filename="${file##*/}"
-    log "Filename: $filename"
-    cp "$file" jarfolder && (cd jarfolder && jar xf "$filename" && rm "$filename")
-
-    find jarfolder \
-      -type f \( -name "*.jnilib" -o -name "*.dylib" -o -name "*.so" -o -name "*.tbd" -o -name "jattach" \) \
-      -exec "$SIGN_UTILITY" --timestamp \
-      --force \
-      -v -s "$JB_DEVELOPER_CERT" --options=runtime \
-      --entitlements "$SCRIPT_DIR/entitlements.xml" {} \;
-
-    (cd jarfolder; zip -q -r -o -0 ../jar.jar .)
-    mv jar.jar "$file"
-  done
-
-rm -rf jarfolder jar.jar
-
-log "Signing other files..."
-# shellcheck disable=SC2043
-for f in \
-  "Contents/Home/bin"; do
-  if [ -d "$APPLICATION_PATH/$f" ]; then
-    find "$APPLICATION_PATH/$f" \
-      -type f \( -name "*.jnilib" -o -name "*.dylib" -o -name "*.so" -o -name "*.tbd" -o -perm +111 \) \
-      -exec "$SIGN_UTILITY" --timestamp \
-      -v -s "$JB_DEVELOPER_CERT" --options=runtime --force \
-      --entitlements "$SCRIPT_DIR/entitlements.xml" {} \;
-  fi
-done
-
-log "Signing whole frameworks..."
-# shellcheck disable=SC2043
-if [ "$JB_SIGN" = true ]; then for f in \
-  "Contents/Home/Frameworks" "Contents/Frameworks"; do
-  if [ -d "$APPLICATION_PATH/$f" ]; then
-    find "$APPLICATION_PATH/$f" \( -name '*.framework' -o -name '*.app' \) -maxdepth 1 | while read -r line
-      do
-        log "Signing '$line':"
-        tar -pczf tmp-to-sign.tar.gz -C "$(dirname "$line")" "$(basename "$line")"
-        "$SIGN_UTILITY" --timestamp \
-            -v -s "$JB_DEVELOPER_CERT" --options=runtime \
-            --force \
-            --entitlements "$SCRIPT_DIR/entitlements.xml" tmp-to-sign.tar.gz
-        rm -rf "$line"
-        tar -xzf tmp-to-sign.tar.gz --directory "$(dirname "$line")"
-        rm -f tmp-to-sign.tar.gz
-      done
-  fi
-done; fi
-
-log "Checking framework signatures..."
-for f in \
-  "Contents/Home/Frameworks" "Contents/Frameworks"; do
-  if [ -d "$APPLICATION_PATH/$f" ]; then
-    find "$APPLICATION_PATH/$f" -name '*.framework'  -maxdepth 1 | while read -r line
-      do
-        log "Checking '$line':"
-        codesign --verify --deep --strict --verbose=4 "$line"
-      done
-  fi
-done
-
-log "Signing whole app..."
-if [ "$JB_SIGN" = true ]; then
-  tar -pczf tmp-to-sign.tar.gz --exclude='man' -C "$(dirname "$APPLICATION_PATH")" "$(basename "$APPLICATION_PATH")"
-  "$SIGN_UTILITY" --timestamp \
-    -v -s "$JB_DEVELOPER_CERT" --options=runtime \
-    --force \
-    --entitlements "$SCRIPT_DIR/entitlements.xml" tmp-to-sign.tar.gz
-  rm -rf "$APPLICATION_PATH"
-  tar -xzf tmp-to-sign.tar.gz --directory "$(dirname "$APPLICATION_PATH")"
-  rm -f tmp-to-sign.tar.gz
-else
-  "$SIGN_UTILITY" --timestamp \
-    -v -s "$JB_DEVELOPER_CERT" --options=runtime \
-    --force \
-    --entitlements "$SCRIPT_DIR/entitlements.xml" "$APPLICATION_PATH"
-fi
-
-BUILD_NAME="$(basename "$APPLICATION_PATH")"
-
-log "Creating $PKG_NAME..."
-rm -rf "$PKG_NAME"
-
-mkdir -p unsigned
-pkgbuild --identifier $BUNDLE_ID --root $APPLICATION_PATH \
-    --install-location /Library/Java/JavaVirtualMachines/${BUILD_NAME} unsigned/${PKG_NAME}
-log "Signing $PKG_NAME..."
-"$PRODUCTSIGN_UTILITY" --timestamp --sign "$JB_INSTALLER_CERT" unsigned/${PKG_NAME} ${PKG_NAME}
-
-log "Verifying java is not broken"
-find "$APPLICATION_PATH" \
-  -type f -name 'java' -perm +111 -exec {} -version \;

jb/project/tools/mac/scripts/signapp.sh

@@ -1,136 +0,0 @@
-#!/bin/bash
-
-#immediately exit script with an error if a command fails
-set -euo pipefail
-[[ "${SCRIPT_VERBOSE:-}" == "1" ]] && set -x
-
-export COPY_EXTENDED_ATTRIBUTES_DISABLE=true
-export COPYFILE_DISABLE=true
-
-INPUT_FILE=$1
-EXPLODED=$2.exploded
-BACKUP_JMODS=$2.backup
-USERNAME=$3
-PASSWORD=$4
-CODESIGN_STRING=$5
-JB_INSTALLER_CERT=$6
-NOTARIZE=$7
-BUNDLE_ID=$8
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" >/dev/null && pwd)"
-
-function log() {
-  echo "$(date '+[%H:%M:%S]') $*"
-}
-
-log "Deleting $EXPLODED ..."
-if test -d "$EXPLODED"; then
-  find "$EXPLODED" -mindepth 1 -maxdepth 1 -exec chmod -R u+wx '{}' \;
-fi
-rm -rf "$EXPLODED"
-mkdir "$EXPLODED"
-rm -rf "$BACKUP_JMODS"
-mkdir "$BACKUP_JMODS"
-
-log "Unzipping $INPUT_FILE to $EXPLODED ..."
-tar -xzvf "$INPUT_FILE" --directory $EXPLODED
-BUILD_NAME="$(ls "$EXPLODED")"
-#sed -i '' s/BNDL/APPL/ $EXPLODED/$BUILD_NAME/Contents/Info.plist
-rm -f $EXPLODED/$BUILD_NAME/Contents/CodeResources
-rm "$INPUT_FILE"
-if test -d $EXPLODED/$BUILD_NAME/Contents/Home/jmods; then
-  mv $EXPLODED/$BUILD_NAME/Contents/Home/jmods $BACKUP_JMODS
-fi
-
-log "$INPUT_FILE extracted and removed"
-
-APP_NAME=$(basename "$INPUT_FILE" | awk -F".tar" '{ print $1 }')
-PKG_NAME="$APP_NAME.pkg"
-APPLICATION_PATH=$EXPLODED/$(ls $EXPLODED)
-
-find "$APPLICATION_PATH/Contents/Home/bin" \
-  -maxdepth 1 -type f -name '*.jnilib' -print0 |
-  while IFS= read -r -d $'\0' file; do
-    if [ -f "$file" ]; then
-      log "Linking $file"
-      b="$(basename "$file" .jnilib)"
-      ln -sf "$b.jnilib" "$(dirname "$file")/$b.dylib"
-    fi
-  done
-
-find "$APPLICATION_PATH/Contents/" \
-  -maxdepth 1 -type f -name '*.txt' -print0 |
-  while IFS= read -r -d $'\0' file; do
-    if [ -f "$file" ]; then
-      log "Moving $file"
-      mv "$file" "$APPLICATION_PATH/Contents/Resources"
-    fi
-  done
-
-non_plist=$(find "$APPLICATION_PATH/Contents/" -maxdepth 1 -type f -and -not -name 'Info.plist' | wc -l)
-if [[ $non_plist -gt 0 ]]; then
-  log "Only Info.plist file is allowed in Contents directory but found $non_plist file(s):"
-  log "$(find "$APPLICATION_PATH/Contents/" -maxdepth 1 -type f -and -not -name 'Info.plist')"
-  exit 1
-fi
-
-if [[ "${JETSIGN_CLIENT:=}" == "null" ]] || [[ "$JETSIGN_CLIENT" == "" ]]; then
-  log "Unlocking keychain..."
-  # Make sure *.p12 is imported into local KeyChain
-  security unlock-keychain -p "$PASSWORD" "/Users/$USERNAME/Library/Keychains/login.keychain"
-fi
-
-attempt=1
-limit=3
-set +e
-while [[ $attempt -le $limit ]]; do
-  log "Signing (attempt $attempt) $APPLICATION_PATH ..."
-  "$SCRIPT_DIR/sign.sh" "$APPLICATION_PATH" "$PKG_NAME" "$BUNDLE_ID" "$CODESIGN_STRING" "$JB_INSTALLER_CERT"
-  ec=$?
-  if [[ $ec -ne 0 ]]; then
-    ((attempt += 1))
-    if [ $attempt -eq $limit ]; then
-      set -e
-    fi
-    log "Signing failed, wait for 30 sec and try to sign again"
-    sleep 30
-  else
-    log "Signing done"
-    codesign -v "$APPLICATION_PATH" -vvvvv
-    log "Check sign done"
-    spctl -a -v $APPLICATION_PATH
-    ((attempt += limit))
-  fi
-done
-
-set -e
-
-if [ "$NOTARIZE" = "yes" ]; then
-  log "Notarizing..."
-  "$SCRIPT_DIR/notarize.sh" "$PKG_NAME"
-  log "Stapling..."
-  xcrun stapler staple "$APPLICATION_PATH" ||:
-  xcrun stapler staple "$PKG_NAME" ||:
-else
-  log "Notarization disabled"
-  log "Stapling disabled"
-fi
-
-log "Zipping $BUILD_NAME to $INPUT_FILE ..."
-(
-  #cd "$EXPLODED"
-  #ditto -c -k --sequesterRsrc --keepParent "$BUILD_NAME" "../$INPUT_FILE"
-  if test -d $BACKUP_JMODS/jmods; then
-    mv $BACKUP_JMODS/jmods $APPLICATION_PATH/Contents/Home
-  fi
-  if [[ "$APPLICATION_PATH" != "$EXPLODED/$BUILD_NAME" ]]; then
-    mv $APPLICATION_PATH $EXPLODED/$BUILD_NAME
-  else
-    echo "No move, source == destination: $APPLICATION_PATH"
-  fi
-
-  tar -pczvf $INPUT_FILE --exclude='man' -C $EXPLODED $BUILD_NAME
-  log "Finished zipping"
-)
-rm -rf "$EXPLODED"
-log "Done"

jb/project/tools/patches/add_jcef_module.patch

@@ -1,30 +0,0 @@
-diff --git jb/project/tools/common/modules.list jb/project/tools/common/modules.list
-index 522acb7cb43..c40e689d5de 100644
---- jb/project/tools/common/modules.list
-+++ jb/project/tools/common/modules.list
-@@ -51,4 +51,7 @@ jdk.unsupported.desktop,
- jdk.xml.dom,
- jdk.zipfs,
- jdk.hotspot.agent,
--jdk.jcmd
-+jdk.jcmd,
-+jcef,
-+gluegen.rt,
-+jogl.all
-diff --git src/java.desktop/share/classes/module-info.java src/java.desktop/share/classes/module-info.java
-index 897647ee368..781d1809493 100644
---- src/java.desktop/share/classes/module-info.java
-+++ src/java.desktop/share/classes/module-info.java
-@@ -116,7 +116,11 @@ module java.desktop {
-     // see make/GensrcModuleInfo.gmk
-     exports sun.awt to
-         jdk.accessibility,
--        jdk.unsupported.desktop;
-+        jdk.unsupported.desktop,
-+        jcef,
-+        jogl.all;
-+
-+    exports java.awt.peer to jcef;
- 
-     exports java.awt.dnd.peer to jdk.unsupported.desktop;
-     exports sun.awt.dnd to jdk.unsupported.desktop;

jb/project/tools/patches/add_jcef_module_aarch64.patch

@@ -1,30 +0,0 @@
-diff --git jb/project/tools/common/modules.list jb/project/tools/common/modules.list
-index 522acb7..c40e689 100644
---- jb/project/tools/common/modules.list
-+++ jb/project/tools/common/modules.list
-@@ -51,4 +51,7 @@ jdk.unsupported.desktop,
- jdk.xml.dom,
- jdk.zipfs,
- jdk.hotspot.agent,
--jdk.jcmd
-+jdk.jcmd,
-+jcef,
-+gluegen.rt,
-+jogl.all
-diff --git src/java.desktop/share/classes/module-info.java src/java.desktop/share/classes/module-info.java
-index 897647e..781d180 100644
---- src/java.desktop/share/classes/module-info.java
-+++ src/java.desktop/share/classes/module-info.java
-@@ -116,7 +116,11 @@ module java.desktop {
-     // see make/GensrcModuleInfo.gmk
-     exports sun.awt to
-         jdk.accessibility,
--        jdk.unsupported.desktop;
-+        jdk.unsupported.desktop,
-+        jcef,
-+        jogl.all;
-+
-+    exports java.awt.peer to jcef;
-
-     exports java.awt.dnd.peer to jdk.unsupported.desktop;
-     exports sun.awt.dnd to jdk.unsupported.desktop;

jb/project/tools/test/check_jbr_size.sh

@@ -1,162 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-
-TC_PRINT=0
-# Always print TeamCity service messages if running under TeamCity
-[[ -n "${TEAMCITY_VERSION:-}" ]] && TC_PRINT=1
-
-while getopts ":t" o; do
-    case "${o}" in
-        t) TC_PRINT=1 ;;
-        *);;
-    esac
-done
-shift $((OPTIND-1))
-
-NEWFILEPATH="$1"
-CONFIGID="$2"
-BUILDID="$3"
-TOKEN="$4"
-
-if [ ! -f "$NEWFILEPATH" ]; then
-  echo "File not found: $NEWFILEPATH"
-  exit 1
-fi
-#
-# Get the size of new artifact
-#
-
-unameOut="$(uname -s)"
-case "${unameOut}" in
-    Linux*)
-      NEWFILESIZE=$(stat -c%s "$NEWFILEPATH")
-      ;;
-    Darwin*)
-      NEWFILESIZE=$(stat -f%z "$NEWFILEPATH")
-      ;;
-    CYGWIN*)
-      NEWFILESIZE=$(stat -c%s "$NEWFILEPATH")
-      ;;
-    MINGW*)
-      NEWFILESIZE=$(stat -c%s "$NEWFILEPATH")
-      ;;
-    *)
-      echo "Unknown machine: ${unameOut}"
-      exit 1
-esac
-FILENAME=$(basename "${NEWFILEPATH}")
-
-#
-# Get pattern of artifact name
-# Base filename pattern: <BUNDLE_TYPE>-<JDK_VERSION>-<OS>-<ARCH>-b<BUILD>.tar.gz: jbr_dcevm-17.0.2-osx-x64-b1234.tar.gz
-# BUNDLE_TYPE: jbr, jbrsdk, jbr_dcevm, jbrsdk_jcef etc.
-# OS_ARCH_PATTERN - <os_architecture>: osx-x64, linux-aarch64, linux-musl-x64, windows-x64 etc.
-
-BUNDLE_TYPE=jbrsdk
-OS_ARCH_PATTERN=""
-FILE_EXTENSION=tar.gz
-
-re='(jbr[a-z_]*).*-[0-9_\.]+-(.+)-b[0-9]+(.+)'
-if [[ $FILENAME =~ $re ]]; then
-  BUNDLE_TYPE=${BASH_REMATCH[1]}
-  OS_ARCH_PATTERN=${BASH_REMATCH[2]}
-  FILE_EXTENSION=${BASH_REMATCH[3]}
-else
-  echo "File name $FILENAME does not match regex $re"
-  exit 1
-fi
-
-function test_started_msg() {
-  if [ $TC_PRINT -eq 1 ]; then
-    echo "##teamcity[testStarted name='$1']"
-  fi
-}
-
-function test_failed_msg() {
-  if [ $TC_PRINT -eq 1 ]; then
-    echo "##teamcity[testFailed name='$1' message='$2']"
-  fi
-}
-
-function test_finished_msg() {
-  if [ $TC_PRINT -eq 1 ]; then
-    echo "##teamcity[testFinished name='$1']"
-  fi
-}
-
-test_name="${BUNDLE_TYPE}_${OS_ARCH_PATTERN//\-/_}${FILE_EXTENSION//\./_}"
-test_started_msg "$test_name"
-
-echo "BUNDLE_TYPE: $BUNDLE_TYPE"
-echo "OS_ARCH_PATTERN: $OS_ARCH_PATTERN"
-echo "FILE_EXTENSION: $FILE_EXTENSION"
-echo "Size of $FILENAME is $NEWFILESIZE bytes"
-
-#
-# Get previous successful build ID
-# Example:
-# CONFIGID=IntellijCustomJdk_Jdk17_Master_LinuxX64jcef
-# BUILDID=12345678
-#
-# expected return value
-# id="123".number="567"
-#
-CURL_RESPONSE=$(curl -sSL --header "Authorization: Bearer $TOKEN" "https://buildserver.labs.intellij.net/app/rest/builds/?locator=buildType:(id:$CONFIGID),status:success,count:1,finishDate:(build:$BUILDID,condition:before)")
-re='id=\"([0-9]+)\".+number=\"([0-9\.]+)\"'
-
-# ID: Previous successful build id
-ID=0
-if [[ $CURL_RESPONSE =~ $re ]]; then
-  ID=${BASH_REMATCH[1]}
-  echo "Previous build ID: $ID"
-  echo "Previous build number: ${BASH_REMATCH[2]}"
-else
-  msg="ERROR: cannot find previous build"
-  echo "$msg"
-  echo "$CURL_RESPONSE"
-  test_failed_msg "$test_name" "$msg"
-  test_finished_msg "$test_name"
-  exit 1
-fi
-
-#
-# Get artifacts from previous successful build
-#
-# expected return value
-# name="jbrsdk_jcef*.tar.gz size="123'
-#
-CURL_RESPONSE=$(curl -sSL --header "Authorization: Bearer $TOKEN" "https://buildserver.labs.intellij.net/app/rest/builds/$ID?fields=id,number,artifacts(file(name,size))")
-echo "Artifacts of the previous build:"
-echo "$CURL_RESPONSE"
-
-# Find binary size (in response) with reg exp
-re="name=\"(${BUNDLE_TYPE}[^\"]+${OS_ARCH_PATTERN}[^\"]+${FILE_EXTENSION})\" size=\"([0-9]+)\""
-
-if [[ $CURL_RESPONSE =~ $re ]]; then
-  prevFileName=${BASH_REMATCH[1]}
-  echo "Previous artifact name: $prevFileName"
-  prevFileSize=${BASH_REMATCH[2]}
-  echo "Previous artifact size: $prevFileSize"
-
-  ((allowedSize=prevFileSize+prevFileSize/20)) # use 5% threshold
-  echo "Allowed size: $allowedSize"
-  if [[ "$NEWFILESIZE" -gt "$allowedSize" ]]; then
-    msg="ERROR: new size is significantly greater than previous size (need to investigate)"
-    echo "$msg"
-    test_failed_msg "$test_name" "$msg"
-    test_finished_msg "$test_name"
-    exit 1
-  else
-    echo "PASSED"
-    test_finished_msg "$test_name"
-  fi
-else
-  msg="ERROR: cannot find string with size in xml response:"
-  echo "Regex: $re"
-  echo "$msg"
-  echo "$CURL_RESPONSE"
-  test_failed_msg "$test_name" "$msg"
-  test_finished_msg "$test_name"
-  exit 1
-fi

jb/project/tools/test/perfcmp.sh

@@ -1,93 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-usage ()
-{
-echo "Usage: perfcmp.sh [options] <test_results_cur> <test_results_ref> <results> <test_prefix> <noHeaders>"
-echo "Options:"
-echo -e " -h, --help\tdisplay this help"
-echo -e " -tc\tprint teacmity statistic"
-echo -e "test_results_cur - the file with  metrics values for the current measuring"
-echo -e "test_results_ref - the file with metrics values for the reference measuring"
-echo -e "results - results of comaprison"
-echo -e "test_prefix - specifys measuring type, makes sense for enabled -tc, by default no prefixes"
-echo -e "noHeaders - by default 1-st line contains headers"
-echo -e ""
-echo -e "test_results_* files content should be in csv format with header and tab separator:"
-echo -e "The 1-st column is the test name"
-echo -e "The 2-st column is the test value"
-echo -e ""
-echo -e "Example:"
-echo -e "Test           Value"
-echo -e "Testname       51.54"
-}
-
-while [ -n "$1" ]
-do
-case "$1" in
--h | --help) usage
-exit 1 ;;
--tc) tc=1
-  shift
-  break  ;;
-*) break;;
-esac
-done
-
-if [[ "$#" < "3" ]]; then
-    echo "Error: Invalid arguments"
-    usage
-    exit 1
-fi
-
-curFile=$1
-refFile=$2
-resFile=$3
-testNamePrefix=$4
-noHeaders=$5
-echo $curFile
-echo $refFile
-echo $resFile
-
-curValues=`cat "$curFile" | cut -f 2 | tr -d '\t'`
-if [ -z $noHeaders ]; then
-  curValuesHeader=`echo "$curValues" | head -n +1`_cur
-  header=`cat "$refFile" | head -n +1 | awk -F'\t' -v x=$curValuesHeader '{print "  "$1"\t"$2"_ref\t"x"\tratio"}'`
-  testContent=`paste -d '\t' $refFile <(echo "$curValues") | tail -n +2`
-else
-  testContent=`paste -d '\t' $refFile <(echo "$curValues") | tail -n +1`
-fi
-
-testContent=`echo "$testContent" | tr "," "." | awk -F'\t' '{
-  if ($3>$2+$2*0.1) {
-    print "* "$1"\t"$2"\t"$3"\t"(($2>0)?$3/$2:"-")
-  } else {
-    print "  "$1"\t"$2"\t"$3"\t"(($2>0)?$3/$2:"-")
-  }
-}'`
-if [ -z $noHeaders ]; then
-  echo "$header" > $resFile
-fi
-echo "$testContent" >> $resFile
-cat "$resFile" | tr '\t' ';' | column -t -s ';' | tee $resFile
-
-if [ -z $tc ]; then
-exit 0
-fi
-
-failed=0
-echo "$testContent" 2>&1 | (
-    while read -r s; do
-        testname=`echo "$s" | cut -f 1 | tr -d "[:space:]" |  tr -d "*"`
-        duration=`echo "$s" | cut -f 3`
-        echo "$s" | cut -c1 | grep -c "*" && failed=1
-        echo \#\#teamcity[testStarted name=\'$testNamePrefix$testname\']
-        echo "===>$s"
-        echo \#\#teamcity[buildStatisticValue key=\'$testNamePrefix$testname\' value=\'$duration\']
-        [ $failed -eq 1 ] && echo \#\#teamcity[testFailed name=\'$testNamePrefix$testname\' message=\'$s\']
-        echo \#\#teamcity[testFinished name=\'$testNamePrefix$testname\' duration=\'$duration\']
-        failed=0
-    done
-)

jb/project/tools/windows/scripts/mkimages_aarch64.sh

@@ -1,146 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script makes test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-# Environment variables:
-#   JDK_BUILD_NUMBER - specifies update release of OpenJDK build or the value of --with-version-build argument
-#               to configure
-#               By default JDK_BUILD_NUMBER is set zero
-#   JCEF_PATH - specifies the path to the directory with JCEF binaries.
-#               By default JCEF binaries should be located in ./jcef_win_aarch64
-
-if [ -z "$BUILD_JDK" ]; then
-  echo "BUILD_JDK environment variable must be specified and point to a JDK built from the current sources" \
-       " and is able to run on the build system. See OpenJDK documentation for --with-build-jdk for more info."
-  exit 1
-fi
-
-source jb/project/tools/common/scripts/common.sh
-
-WORK_DIR=$(pwd)
-JCEF_PATH=${JCEF_PATH:=$WORK_DIR/jcef_win_aarch64}
-NVDA_PATH=${NVDA_PATH:=$WORK_DIR/nvda_controllerClient}
-
-function do_configure {
-  sh ./configure \
-    --enable-option-checking=fatal \
-    --openjdk-target=aarch64-unknown-cygwin \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build=$JDK_BUILD_NUMBER \
-    --with-version-opt=b${build_number} \
-    --with-toolchain-version=$TOOLCHAIN_VERSION \
-    --with-boot-jdk=$BOOT_JDK \
-    --with-build-jdk=$BUILD_JDK \
-    --with-nvdacontrollerclient=$NVDA_PATH \
-    --disable-ccache \
-    --enable-cds=yes \
-    $STATIC_CONF_ARGS \
-    $REPRODUCIBLE_BUILD_OPTS \
-    || do_exit $?
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-aarch64-${fastdebug_infix}b${build_number}
-
-  echo Running jlink ...
-  ${BUILD_JDK}/bin/jlink \
-    --module-path $__modules_path --no-man-pages --compress=2 \
-    --add-modules $__modules --output $__root_dir || do_exit $?
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> $__root_dir/release
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' $__root_dir/release > release
-    mv release $__root_dir/release
-    cp $IMAGES_DIR/jdk/lib/src.zip $__root_dir/lib
-    for dir in $(ls -d $IMAGES_DIR/jdk/*); do
-      rsync -amv --include="*/" --include="*.pdb" --exclude="*" $dir $__root_dir
-    done
-    copy_jmods "$__modules" "$__modules_path" "$__root_dir"/jmods
-  fi
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=windows-aarch64-server-release
-
-case "$bundle_type" in
-  "jcef")
-    do_reset_changes=0
-    do_maketest=1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=0
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=windows-aarch64-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME clean images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME clean images || do_exit $?
-  fi
-else
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME images || do_exit $?
-  fi
-fi
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module_aarch64.patch || do_exit $?
-  update_jsdk_mods "$BUILD_JDK" "$JCEF_PATH"/jmods "$JSDK"/jmods "$JSDK_MODS_DIR" || do_exit $?
-  cp $JCEF_PATH/jmods/* ${JSDK_MODS_DIR} # $JSDK/jmods is not unchanged
-
-  jbr_name_postfix="_${bundle_type}"
-  cat $JCEF_PATH/jcef.version >> $JSDK/release
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(xargs < jb/project/tools/common/modules.list | sed s/" "//g) || do_exit $?
-modules+=",jdk.crypto.mscapi"
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat ${JSDK}/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\r//g | sed s/\\n//g) || do_exit $?
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" "$JBRSDK_BUNDLE" "$JSDK_MODS_DIR" "$modules" || do_exit $?
-
-do_exit 0

jb/project/tools/windows/scripts/mkimages_x64.sh

@@ -1,137 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script makes test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-# Environment variables:
-#   JDK_BUILD_NUMBER - specifies update release of OpenJDK build or the value of --with-version-build argument
-#               to configure
-#               By default JDK_BUILD_NUMBER is set zero
-#   JCEF_PATH - specifies the path to the directory with JCEF binaries.
-#               By default JCEF binaries should be located in ./jcef_win_x64
-
-source jb/project/tools/common/scripts/common.sh
-
-WORK_DIR=$(pwd)
-JCEF_PATH=${JCEF_PATH:=$WORK_DIR/jcef_win_x64}
-NVDA_PATH=${NVDA_PATH:=$WORK_DIR/nvda_controllerClient}
-
-function do_configure {
-  sh ./configure \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build=$JDK_BUILD_NUMBER \
-    --with-version-opt=b${build_number} \
-    --with-toolchain-version=$TOOLCHAIN_VERSION \
-    --with-boot-jdk=$BOOT_JDK \
-    --with-nvdacontrollerclient=$NVDA_PATH \
-    --disable-ccache \
-    --enable-cds=yes \
-    $STATIC_CONF_ARGS \
-    $REPRODUCIBLE_BUILD_OPTS \
-    || do_exit $?
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-x64-${fastdebug_infix}b${build_number}
-
-  echo Running jlink ...
-  ${JSDK}/bin/jlink \
-    --module-path $__modules_path --no-man-pages --compress=2 \
-    --add-modules $__modules --output $__root_dir || do_exit $?
-
-    grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> $__root_dir/release
-    if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' $__root_dir/release > release
-    mv release $__root_dir/release
-    cp $IMAGES_DIR/jdk/lib/src.zip $__root_dir/lib
-    for dir in $(ls -d $IMAGES_DIR/jdk/*); do
-      rsync -amv --include="*/" --include="*.pdb" --exclude="*" $dir $__root_dir
-    done
-    copy_jmods "$__modules" "$__modules_path" "$__root_dir"/jmods
-  fi
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=windows-x86_64-server-release
-
-case "$bundle_type" in
-  "jcef")
-    do_reset_changes=0
-    do_maketest=1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=0
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=windows-x86_64-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME clean images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME clean images || do_exit $?
-  fi
-else
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME images || do_exit $?
-  fi
-fi
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module.patch || do_exit $?
-  update_jsdk_mods "$JSDK" "$JCEF_PATH"/jmods "$JSDK"/jmods "$JSDK_MODS_DIR" || do_exit $?
-  cp $JCEF_PATH/jmods/* ${JSDK_MODS_DIR} # $JSDK/jmods is not unchanged
-
-  jbr_name_postfix="_${bundle_type}"
-  cat $JCEF_PATH/jcef.version >> $JSDK/release
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(xargs < jb/project/tools/common/modules.list | sed s/" "//g) || do_exit $?
-modules+=",jdk.crypto.mscapi"
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat ${JSDK}/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\r//g | sed s/\\n//g)
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" "$JBRSDK_BUNDLE" "$JSDK_MODS_DIR" "$modules" || do_exit $?
-
-do_exit 0

jb/project/tools/windows/scripts/mkimages_x86.sh

@@ -1,131 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# $ ./java --version
-# openjdk 11.0.6 2020-01-14
-# OpenJDK Runtime Environment (build 11.0.6+${JDK_BUILD_NUMBER}-b${build_number})
-# OpenJDK 64-Bit Server VM (build 11.0.6+${JDK_BUILD_NUMBER}-b${build_number}, mixed mode)
-#
-
-source jb/project/tools/common/scripts/common.sh
-
-WORK_DIR=$(pwd)
-NVDA_PATH=${NVDA_PATH:=$WORK_DIR/nvda_controllerClient}
-
-
-function do_configure {
-  sh ./configure \
-    $WITH_DEBUG_LEVEL \
-    --with-vendor-name="$VENDOR_NAME" \
-    --with-vendor-version-string="$VENDOR_VERSION_STRING" \
-    --with-jvm-features=shenandoahgc \
-    --with-version-pre= \
-    --with-version-build=$JDK_BUILD_NUMBER \
-    --with-version-opt=b${build_number} \
-    --with-toolchain-version=$TOOLCHAIN_VERSION \
-    --with-boot-jdk=$BOOT_JDK \
-    --with-nvdacontrollerclient=$NVDA_PATH \
-    --disable-ccache \
-    --enable-cds=yes \
-    $STATIC_CONF_ARGS \
-    $REPRODUCIBLE_BUILD_OPTS \
-    || do_exit $?
-}
-
-function create_image_bundle {
-  __bundle_name=$1
-  __arch_name=$2
-  __modules_path=$3
-  __modules=$4
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-x86-${fastdebug_infix}b${build_number}
-
-  echo Running jlink ...
-  ${JSDK}/bin/jlink \
-    --module-path $__modules_path --no-man-pages --compress=2 \
-    --add-modules $__modules --output $__root_dir || do_exit $?
-
-  grep -v "^JAVA_VERSION" "$JSDK"/release | grep -v "^MODULES" >> $__root_dir/release
-  if [ "$__arch_name" == "$JBRSDK_BUNDLE" ]; then
-    sed 's/JBR/JBRSDK/g' $__root_dir/release > release
-    mv release $__root_dir/release
-    cp $IMAGES_DIR/jdk/lib/src.zip $__root_dir/lib
-    for dir in $(ls -d $IMAGES_DIR/jdk/*); do
-      rsync -amv --include="*/" --include="*.pdb" --exclude="*" $dir $__root_dir
-    done
-    copy_jmods "$__modules" "$__modules_path" "$__root_dir"/jmods
-  fi
-}
-
-WITH_DEBUG_LEVEL="--with-debug-level=release"
-RELEASE_NAME=windows-x86_64-server-release
-
-case "$bundle_type" in
-  "jcef")
-    echo "not implemented" && do_exit 1
-    ;;
-  "nomod" | "")
-    bundle_type=""
-    ;;
-  "fd")
-    do_reset_changes=0
-    WITH_DEBUG_LEVEL="--with-debug-level=fastdebug"
-    RELEASE_NAME=windows-x86_64-server-fastdebug
-    ;;
-esac
-
-if [ -z "${INC_BUILD:-}" ]; then
-  do_configure || do_exit $?
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME clean images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME clean images || do_exit $?
-  fi
-else
-  if [ $do_maketest -eq 1 ]; then
-    make LOG=info CONF=$RELEASE_NAME images test-image jbr-api JBR_API_JBR_VERSION=TEST || do_exit $?
-  else
-    make LOG=info CONF=$RELEASE_NAME images || do_exit $?
-  fi
-fi
-
-IMAGES_DIR=build/$RELEASE_NAME/images
-JSDK=$IMAGES_DIR/jdk
-JSDK_MODS_DIR=$IMAGES_DIR/jmods
-JBRSDK_BUNDLE=jbrsdk
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ]; then
-  git apply -p0 < jb/project/tools/patches/add_jcef_module.patch || do_exit $?
-  update_jsdk_mods "$JSDK" "$JCEF_PATH"/jmods "$JSDK"/jmods "$JSDK_MODS_DIR" || do_exit $?
-  cp $JCEF_PATH/jmods/* ${JSDK_MODS_DIR} # $JSDK/jmods is not unchanged
-
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-# create runtime image bundle
-modules=$(grep -v "jdk.internal.vm" jb/project/tools/common/modules.list | xargs | sed s/" "//g) || do_exit $?
-modules+=",jdk.crypto.mscapi"
-create_image_bundle "jbr${jbr_name_postfix}" "jbr" $JSDK_MODS_DIR "$modules" || do_exit $?
-
-# create sdk image bundle
-modules=$(cat ${JSDK}/release | grep MODULES | sed s/MODULES=//g | sed s/' '/','/g | sed s/\"//g | sed s/\\r//g | sed s/\\n//g)
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "fd" ] || [ "$bundle_type" == "$JBRSDK_BUNDLE" ]; then
-  modules=${modules},$(get_mods_list "$JCEF_PATH"/jmods)
-fi
-create_image_bundle "$JBRSDK_BUNDLE${jbr_name_postfix}" "$JBRSDK_BUNDLE" "$JSDK_MODS_DIR" "$modules" || do_exit $?
-
-do_exit 0

jb/project/tools/windows/scripts/pack_aarch64.sh

@@ -1,57 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script packs test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-
-source jb/project/tools/common/scripts/common.sh
-
-[ "$bundle_type" == "jcef" ] && do_maketest=1
-
-function pack_jbr {
-  __bundle_name=$1
-  __arch_name=$2
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-windows-aarch64-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-aarch64-${fastdebug_infix}b${build_number}
-
-  echo Creating $JBR.tar.gz ...
-  chmod -R ug+rwx,o+rx ${BASE_DIR}/$__root_dir
-  /usr/bin/tar -czf $JBR.tar.gz -C $BASE_DIR $__root_dir || do_exit $?
-}
-
-[ "$bundle_type" == "nomod" ] && bundle_type=""
-
-JBRSDK_BUNDLE=jbrsdk
-RELEASE_NAME=windows-aarch64-server-release
-IMAGES_DIR=build/$RELEASE_NAME/images
-BASE_DIR=.
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "dcevm" ] || [ "$bundle_type" == "fd" ]; then
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-pack_jbr jbr${jbr_name_postfix} jbr
-pack_jbr jbrsdk${jbr_name_postfix} jbrsdk
-
-if [ $do_maketest -eq 1 ]; then
-  JBRSDK_TEST=$JBRSDK_BUNDLE-$JBSDK_VERSION-windows-test-aarch64-b$build_number
-  cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test" || do_exit $?
-  echo Creating $JBRSDK_TEST.tar.gz ...
-  /usr/bin/tar -czf $JBRSDK_TEST.tar.gz -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-fi

jb/project/tools/windows/scripts/pack_x64.sh

@@ -1,57 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               jcef - the release bundles with jcef
-#               fd - the fastdebug bundles which also include the jcef module
-#
-# This script packs test-image along with JDK images when bundle_type is set to "jcef".
-# If the character 't' is added at the end of bundle_type then it also makes test-image along with JDK images.
-#
-
-source jb/project/tools/common/scripts/common.sh
-
-[ "$bundle_type" == "jcef" ] && do_maketest=1
-
-function pack_jbr {
-  __bundle_name=$1
-  __arch_name=$2
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-windows-x64-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-x64-${fastdebug_infix}b${build_number}
-
-  echo Creating $JBR.tar.gz ...
-  chmod -R ug+rwx,o+rx ${BASE_DIR}/$__root_dir
-  /usr/bin/tar -czf $JBR.tar.gz -C $BASE_DIR $__root_dir || do_exit $?
-}
-
-[ "$bundle_type" == "nomod" ] && bundle_type=""
-
-JBRSDK_BUNDLE=jbrsdk
-RELEASE_NAME=windows-x86_64-server-release
-IMAGES_DIR=build/$RELEASE_NAME/images
-BASE_DIR=.
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "dcevm" ] || [ "$bundle_type" == "fd" ]; then
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-pack_jbr jbr${jbr_name_postfix} jbr
-pack_jbr jbrsdk${jbr_name_postfix} jbrsdk
-
-if [ $do_maketest -eq 1 ]; then
-  JBRSDK_TEST=$JBRSDK_BUNDLE-$JBSDK_VERSION-windows-test-x64-b$build_number
-  cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test" || do_exit $?
-  echo Creating $JBRSDK_TEST.tar.gz ...
-  /usr/bin/tar -czf $JBRSDK_TEST.tar.gz -C $IMAGES_DIR --exclude='test/jdk/demos' test || do_exit $?
-fi

jb/project/tools/windows/scripts/pack_x86.sh

@@ -1,53 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-set -x
-
-# The following parameters must be specified:
-#   build_number - specifies the number of JetBrainsRuntime build
-#   bundle_type  - specifies bundle to be built;possible values:
-#               <empty> or nomod - the release bundles without any additional modules (jcef)
-#               fd - the fastdebug bundles which also include the jcef module
-#
-
-source jb/project/tools/common/scripts/common.sh
-
-[ "$bundle_type" == "jcef" ] && echo "not implemented" && do_exit 1
-
-function pack_jbr {
-  __bundle_name=$1
-  __arch_name=$2
-
-  fastdebug_infix=''
-
-  [ "$bundle_type" == "fd" ] && [ "$__arch_name" == "$JBRSDK_BUNDLE" ] && __bundle_name=$__arch_name && fastdebug_infix="fastdebug-"
-  JBR=${__bundle_name}-${JBSDK_VERSION}-windows-x86-${fastdebug_infix}b${build_number}
-  __root_dir=${__bundle_name}-${JBSDK_VERSION}-windows-x86-${fastdebug_infix}b${build_number}
-
-  echo Creating $JBR.tar.gz ...
-  chmod -R ug+rwx,o+rx ${BASE_DIR}/$__root_dir
-  /usr/bin/tar -czf $JBR.tar.gz -C $BASE_DIR $__root_dir || do_exit $?
-}
-
-[ "$bundle_type" == "nomod" ] && bundle_type=""
-
-JBRSDK_BUNDLE=jbrsdk
-RELEASE_NAME=windows-x86_64-server-release
-IMAGES_DIR=build/$RELEASE_NAME/images
-BASE_DIR=.
-
-if [ "$bundle_type" == "jcef" ] || [ "$bundle_type" == "dcevm" ] || [ "$bundle_type" == "fd" ]; then
-  jbr_name_postfix="_${bundle_type}"
-else
-  jbr_name_postfix=""
-fi
-
-pack_jbr jbr${jbr_name_postfix} jbr
-pack_jbr jbrsdk${jbr_name_postfix} jbrsdk
-
-if [ $do_maketest -eq 1 ]; then
-  JBRSDK_TEST=$JBRSDK_BUNDLE-$JBSDK_VERSION-windows-test-x86-b$build_number
-  cp "build/${RELEASE_NAME}/jbr-api/jbr-api.jar" "${IMAGES_DIR}/test" || do_exit $?
-  echo Creating $JBRSDK_TEST.tar.gz ...
-  /usr/bin/tar -czf $JBRSDK_TEST.tar.gz -C $BASE_DIR --exclude='test/jdk/demos' test || do_exit $?
-fi

make/Bundles.gmk

@@ -278,7 +278,16 @@ ifneq ($(filter product-bundles% legacy-bundles, $(MAKECMDGOALS)), )
       $(SYMBOLS_EXCLUDE_PATTERN), \
       $(ALL_JRE_FILES))
 
-  ifeq ($(MACOSX_CODESIGN_MODE), hardened)
+  # On Macosx release builds, when there is a code signing certificate available,
+  # the final bundle layout can be signed.
+  SIGN_BUNDLE := false
+  ifeq ($(call isTargetOs, macosx)+$(DEBUG_LEVEL), true+release)
+    ifneq ($(CODESIGN), )
+      SIGN_BUNDLE := true
+    endif
+  endif
+
+  ifeq ($(SIGN_BUNDLE), true)
     # Macosx release build and code signing available.
 
     ################################################################################

make/CompileCommands.gmk

@@ -29,7 +29,7 @@ include $(SPEC)
 include MakeBase.gmk
 
 # When FIXPATH is set, let it process the file to make sure all paths are usable
-# by system native tools. The FIXPATH tool assumes arguments preceeded by an @
+# by system native tools. The FIXPATH tool assumes arguments preceded by an @
 # character points to a text file containing further arguments (similar to a
 # linker). It replaces any such arguments with a different temporary filename,
 # whose contents has been processed to make any paths native. To obtain a

make/CompileDemos.gmk

@@ -104,7 +104,7 @@ define SetupBuildDemoBody
   ifneq ($$($1_SRC_SUB_DIR), )
     $1_MAIN_SRC := $$($1_SRC_BASE)/$$($1_SRC_SUB_DIR)
   else
-    # for allmost all
+    # for almost all
     $1_MAIN_SRC := $$($1_SRC_BASE)
   endif
 

make/CompileInterimLangtools.gmk

@@ -71,11 +71,11 @@ define SetupInterimModule
       SRC := $(BUILDTOOLS_OUTPUTDIR)/gensrc/$1.interim \
           $$(wildcard $(SUPPORT_OUTPUTDIR)/gensrc/$1) \
           $(TOPDIR)/src/$1/share/classes, \
-      EXCLUDES := sun, \
+      EXCLUDES := sun javax/tools/snippet-files, \
       EXCLUDE_FILES := $(TOPDIR)/src/$1/share/classes/module-info.java \
           Standard.java, \
       EXTRA_FILES := $(BUILDTOOLS_OUTPUTDIR)/gensrc/$1.interim/module-info.java, \
-      COPY := .gif .png .xml .css .js .js.template .txt javax.tools.JavaCompilerTool, \
+      COPY := .gif .png .xml .css .svg .js .js.template .txt javax.tools.JavaCompilerTool, \
       BIN := $(BUILDTOOLS_OUTPUTDIR)/interim_langtools_modules/$1.interim, \
       DISABLED_WARNINGS := module options, \
       JAVAC_FLAGS := \

make/CreateJmods.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2021, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -196,6 +196,11 @@ else # not java.base
   endif
 endif
 
+# Set main class of jdk.httpserver module
+ifeq ($(MODULE), jdk.httpserver)
+    JMOD_FLAGS += --main-class sun.net.httpserver.simpleserver.Main
+endif
+
 # Changes to the jmod tool itself should also trigger a rebuild of all jmods.
 # The variable JMOD_CMD could contain an environment variable assignment before
 # the actual command. Filter that out using wildcard before adding to DEPS.
@@ -228,23 +233,6 @@ else
   JMOD_SOURCE_DATE :=
 endif
 
-ifeq ($(ENABLE_REPRODUCIBLE_BUILD), true)
-  # If boot JDK's jar supported --date, jrt-fs.jar would've been built with
-  # that option already.
-  ifneq ($(BOOT_JDK_JAR_SUPPORTS_DATE), true)
-    ifeq ($(MODULE), java.base)
-      JAR_FILE_TO_FIX := $(SUPPORT_OUTPUTDIR)/modules_libs/java.base/jrt-fs.jar
-      $(eval $(call SetupExecute, fixup_jrtfs_jar, \
-        WARN := Fixing timestamps in modules_libs/java.base/jrt-fs.jar, \
-        DEPS := $(JAR_FILE_TO_FIX) $(JDK_OUTPUTDIR)/bin/jar, \
-        OUTPUT_DIR := $(JMODS_SUPPORT_DIR), \
-        COMMAND := $(BUILD_JAR) --date $(SOURCE_DATE_ISO_8601) --update --file $(JAR_FILE_TO_FIX) @$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/_the.jrt-fs.jar_contents, \
-      ))
-      DEPS += $(fixup_jrtfs_jar_TARGET)
-    endif
-  endif
-endif
-
 # Create jmods in the support dir and then move them into place to keep the
 # module path in $(IMAGES_OUTPUTDIR)/jmods valid at all times.
 $(eval $(call SetupExecute, create_$(JMOD_FILE), \

make/Docs.gmk

@@ -104,14 +104,14 @@ JAVADOC_DISABLED_DOCLINT_PACKAGES := org.w3c.* javax.smartcardio
 
 # The initial set of options for javadoc
 JAVADOC_OPTIONS := -use -keywords -notimestamp \
-    -serialwarn -encoding ISO-8859-1 -docencoding UTF-8 -breakiterator \
+    -encoding ISO-8859-1 -docencoding UTF-8 -breakiterator \
     -splitIndex --system none -javafx --expand-requires transitive \
     --override-methods=summary
 
 # The reference options must stay stable to allow for comparisons across the
 # development cycle.
 REFERENCE_OPTIONS := -XDignore.symbol.file=true -use -keywords -notimestamp \
-    -serialwarn -encoding ISO-8859-1 -breakiterator -splitIndex --system none \
+    -encoding ISO-8859-1 -breakiterator -splitIndex --system none \
     -html5 -javafx --expand-requires transitive
 
 # Should we add DRAFT stamps to the generated javadoc?
@@ -131,7 +131,7 @@ JAVA_PLATFORM := Java Platform
 
 ifeq ($(IS_DRAFT), true)
   DRAFT_MARKER_STR := <br><strong>DRAFT $(VERSION_STRING)</strong>
-  ifeq ($(VERSION_BUILD), 0)
+  ifeq ($(VERSION_BUILD), )
     DRAFT_MARKER_TITLE := $(SPACE)[ad-hoc build]
   else
     DRAFT_MARKER_TITLE := $(SPACE)[build $(VERSION_BUILD)]

make/Doctor.gmk

@@ -0,0 +1,148 @@
+#
+# Copyright (c) 2022, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.  Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+default: all
+
+include $(SPEC)
+include MakeBase.gmk
+
+# Hook to include the corresponding custom file, if present.
+$(eval $(call IncludeCustomExtension, Doctor.gmk))
+
+################################################################################
+#
+# Help user diagnose possible errors and problems with the build environment.
+#
+
+prologue:
+	$(ECHO)
+	$(ECHO) '"make doctor" will help you analyze your build environment. It can highlight'
+	$(ECHO) 'certain well-known problems, but it can never find all possible errors.'
+
+TARGETS += prologue
+
+check-git: prologue
+	$(ECHO)
+	$(ECHO) '* Verifying that configure has picked up git...'
+        ifeq ($(GIT), )
+	  $(ECHO) 'WARNING: "git" is not present. This will disable several checks.'
+	  $(ECHO) '! Correct by installing git and verifying that it is in the PATH'
+        endif
+
+TARGETS += check-git
+
+ifneq ($(GIT), )
+  AUTOCRLF := $(shell $(GIT) config core.autocrlf)
+endif
+
+check-autocrlf: check-git
+        ifneq ($(GIT), )
+          ifeq ($(call isBuildOs, windows), true)
+	    $(ECHO)
+	    $(ECHO) '* Verifying git core.autocrlf value...'
+            ifneq ($(AUTOCRLF), false)
+	      $(ECHO) 'WARNING: core.autocrlf is not "false".  HIGH RISK of build failure!'
+	      $(ECHO) '! Correct by running 'git config --global core.autocrlf false' and re-cloning the repo'
+            endif
+          endif
+        endif
+
+TARGETS += check-autocrlf
+
+check-configure-warnings: check-autocrlf
+	$(ECHO)
+	$(ECHO) '* Checking for warnings from configure...'
+	warning_output=`$(GREP) -e "^\* Memory limit:" -A 300 $(OUTPUTDIR)/configure.log | $(TAIL) -n +3 | $(SED) -e '$(DOLLAR){/^$(DOLLAR)/d;}'` && \
+	if test -n "$$warning_output" ; then \
+	  $(ECHO) ' ---' ; \
+	  $(GREP) -e "^\* Memory limit:" -A 300 $(OUTPUTDIR)/configure.log | $(TAIL) -n +3 | $(SED) -e '$(DOLLAR){/^$(DOLLAR)/d;}' ; \
+	  $(ECHO) ' ---' ; \
+	  $(ECHO) '! Inspect the warnings, fix any problems, and re-run configure' ; \
+	fi
+
+TARGETS += check-configure-warnings
+
+ifneq ($(GIT), )
+  # This might have been set by custom component
+  UNTRACKED_FILES ?= $(shell $(GIT) status --porcelain --ignored | $(CUT) -c 4-)
+endif
+
+check-core-files: check-configure-warnings
+        ifneq ($(GIT), )
+	  $(ECHO)
+	  $(ECHO) '* Checking for left-over core files...'
+	  core_files_found=`echo "$(UNTRACKED_FILES)" | $(TR) ' ' '\n' | $(GREP) core` && \
+	  if test -n "$$core_files_found" ; then \
+	    $(ECHO) 'Found these potential core files. They might interfere with the build process:' ; \
+	    $(ECHO) ' ---' ; \
+	    $(ECHO) $$core_files_found | $(TR) ' ' '\n'; \
+	    $(ECHO) ' ---' ; \
+	    $(ECHO) '! Remove left-over core files' ; \
+	  fi || : # do nothing if grep returns non-0 value
+        endif
+
+TARGETS += check-core-files
+
+check-bad-file-names: check-core-files
+        ifneq ($(GIT), )
+	  $(ECHO)
+	  $(ECHO) '* Checking for untracked files with illegal names...'
+	  core_files_found=`echo "$(UNTRACKED_FILES)" | $(TR) ' ' '\n' | $(GREP) '#'` && \
+	  if test -n "$$core_files_found" ; then \
+	    $(ECHO) 'Found these files with illegal names. They *will* cause build failures:' ; \
+	    $(ECHO) ' ---' ; \
+	    $(ECHO) $$core_files_found | $(TR) ' ' '\n'; \
+	    $(ECHO) ' ---' ; \
+	    $(ECHO) '! Remove all files with '#' in their name from the JDK source tree' ; \
+	  fi || : # do nothing if grep returns non-0 value
+        endif
+
+TARGETS += check-bad-file-names
+
+epilogue: check-bad-file-names
+	$(ECHO)
+	$(ECHO) '* If all else fails, try removing the entire build directory and re-creating'
+	$(ECHO) 'the same configuration using:'
+	$(ECHO) ' ---' ; \
+	$(ECHO) configure_command_line=\$$\(make print-configuration\)
+	$(ECHO) make dist-clean
+	$(ECHO) bash configure \$$configure_command_line
+	$(ECHO) ' ---' ; \
+	$(ECHO)
+	$(ECHO) '* The build README (doc/building.md) is a great source of information,'
+	$(ECHO) 'especially the chapter "Fixing Unexpected Build Failures". Check it out!'
+	$(ECHO)
+	$(ECHO) '* If you still need assistance please contact build-dev@openjdk.java.net.'
+	$(ECHO)
+
+TARGETS += epilogue
+
+################################################################################
+
+doctor: $(TARGETS)
+
+all: doctor
+
+.PHONY: default all doctor $(TARGETS)

make/Global.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2012, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -53,14 +53,17 @@ help:
 	$(info $(_) make docs-jdk-api      # Create just JDK javadocs)
 	$(info $(_) make bootcycle-images  # Build images twice, second time with newly built JDK)
 	$(info $(_) make install           # Install the generated images locally)
-	$(info $(_) make reconfigure       # Rerun configure with the same arguments as last time)
-	$(info $(_) make help              # Give some help on using make)
 	$(info $(_) make check             # Run basic testing (currently tier1))
 	$(info $(_) make test-<test>       # Run test, e.g. test-tier1)
 	$(info $(_) make test TEST=<t>     # Run test(s) given by TEST specification)
 	$(info $(_) make exploded-test TEST=<t> # Run test(s) on the exploded image instead of)
 	$(info $(_)                        # the full jdk image)
 	$(info )
+	$(info Targets for troubleshooting)
+	$(info $(_) make help              # Give some help on using make)
+	$(info $(_) make doctor            # Diagnose build environment problems)
+	$(info $(_) make reconfigure       # Rerun configure with the same arguments as last time)
+	$(info )
 	$(info Targets for cleaning)
 	$(info $(_) make clean             # Remove all files generated by make, but not those)
 	$(info $(_)                        # generated by configure)

make/GraalBuilderImage.gmk

@@ -23,7 +23,7 @@
 # questions.
 #
 
-# This makefile creates a jdk image overlayed with statically linked core
+# This makefile creates a jdk image overlaid with statically linked core
 # libraries.
 
 default: all

make/Hsdis.gmk

@@ -0,0 +1,204 @@
+#
+# Copyright (c) 2020, 2022, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.  Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+default: all
+
+include $(SPEC)
+include MakeBase.gmk
+include JdkNativeCompilation.gmk
+
+################################################################################
+# This makefile compiles and installs the hsdis library
+#
+################################################################################
+
+HSDIS_OUTPUT_DIR := $(SUPPORT_OUTPUTDIR)/hsdis
+REAL_HSDIS_NAME := hsdis-$(OPENJDK_TARGET_CPU_LEGACY_LIB)$(SHARED_LIBRARY_SUFFIX)
+BUILT_HSDIS_LIB := $(HSDIS_OUTPUT_DIR)/$(REAL_HSDIS_NAME)
+
+HSDIS_TOOLCHAIN := TOOLCHAIN_DEFAULT
+HSDIS_TOOLCHAIN_CFLAGS := $(CFLAGS_JDKLIB)
+HSDIS_TOOLCHAIN_LDFLAGS := $(LDFLAGS_JDKLIB)
+
+ifeq ($(HSDIS_BACKEND), capstone)
+  ifeq ($(call isTargetCpuArch, x86), true)
+    CAPSTONE_ARCH := CS_ARCH_X86
+    CAPSTONE_MODE := CS_MODE_$(OPENJDK_TARGET_CPU_BITS)
+  else ifeq ($(call isTargetCpuArch, aarch64), true)
+    CAPSTONE_ARCH := CS_ARCH_ARM64
+    CAPSTONE_MODE := CS_MODE_ARM
+  else
+    $(error No support for Capstone on this platform)
+  endif
+
+  HSDIS_CFLAGS += -DCAPSTONE_ARCH=$(CAPSTONE_ARCH) \
+      -DCAPSTONE_MODE=$(CAPSTONE_MODE)
+endif
+
+ifeq ($(HSDIS_BACKEND), llvm)
+  # Use C++ instead of C
+  HSDIS_TOOLCHAIN_CFLAGS := $(CXXFLAGS_JDKLIB)
+  HSDIS_TOOLCHAIN := TOOLCHAIN_LINK_CXX
+
+  ifeq ($(call isTargetOs, linux), true)
+    LLVM_OS := pc-linux-gnu
+  else ifeq ($(call isTargetOs, macosx), true)
+    LLVM_OS := apple-darwin
+  else ifeq ($(call isTargetOs, windows), true)
+    LLVM_OS := pc-windows-msvc
+  else
+    $(error No support for LLVM on this platform)
+  endif
+
+  HSDIS_CFLAGS += -DLLVM_DEFAULT_TRIPLET='"$(OPENJDK_TARGET_CPU)-$(LLVM_OS)"'
+endif
+
+ifeq ($(HSDIS_BACKEND), binutils)
+  ifeq ($(call isTargetOs, windows), true)
+    # On windows, we need to "fake" a completely different toolchain using gcc
+    # instead of the normal microsoft toolchain. This is quite hacky...
+
+    MINGW_BASE := x86_64-w64-mingw32
+
+    MINGW_SYSROOT = $(shell $(MINGW_BASE)-gcc -print-sysroot)
+    ifeq ($(wildcard $(MINGW_SYSROOT)), )
+      # Use fallback path
+      MINGW_SYSROOT := /usr/$(MINGW_BASE)
+      ifeq ($(wildcard $(MINGW_SYSROOT)), )
+        $(error mingw sysroot not found)
+      endif
+    endif
+
+    $(eval $(call DefineNativeToolchain, TOOLCHAIN_MINGW, \
+        CC := $(MINGW_BASE)-gcc, \
+        LD := $(MINGW_BASE)-ld, \
+        OBJCOPY := $(MINGW_BASE)-objcopy, \
+        RC := $(RC), \
+        SYSROOT_CFLAGS := --sysroot=$(MINGW_SYSROOT), \
+        SYSROOT_LDFLAGS := --sysroot=$(MINGW_SYSROOT), \
+    ))
+
+    MINGW_SYSROOT_LIB_PATH := $(MINGW_SYSROOT)/mingw/lib
+    ifeq ($(wildcard $(MINGW_SYSROOT_LIB_PATH)), )
+      # Try without mingw
+      MINGW_SYSROOT_LIB_PATH := $(MINGW_SYSROOT)/lib
+      ifeq ($(wildcard $(MINGW_SYSROOT_LIB_PATH)), )
+        $(error mingw sysroot lib path not found)
+      endif
+    endif
+
+    MINGW_VERSION = $(shell $(MINGW_BASE)-gcc -v 2>&1 | $(GREP) "gcc version" | $(CUT) -d " " -f 3)
+    MINGW_GCC_LIB_PATH := /usr/lib/gcc/$(MINGW_BASE)/$(MINGW_VERSION)
+    ifeq ($(wildcard $(MINGW_GCC_LIB_PATH)), )
+      # Try using only major version number
+      MINGW_VERSION_MAJOR := $(firstword $(subst ., , $(MINGW_VERSION)))
+      MINGW_GCC_LIB_PATH := /usr/lib/gcc/$(MINGW_BASE)/$(MINGW_VERSION_MAJOR)
+      ifeq ($(wildcard $(MINGW_GCC_LIB_PATH)), )
+        $(error mingw gcc lib path not found)
+      endif
+    endif
+
+    TOOLCHAIN_TYPE := gcc
+    OPENJDK_TARGET_OS := linux
+    CC_OUT_OPTION := -o$(SPACE)
+    LD_OUT_OPTION := -o$(SPACE)
+    GENDEPS_FLAGS := -MMD -MF
+    CFLAGS_DEBUG_SYMBOLS := -g
+    DISABLED_WARNINGS :=
+    DISABLE_WARNING_PREFIX := -Wno-
+    CFLAGS_WARNINGS_ARE_ERRORS := -Werror
+    SHARED_LIBRARY_FLAGS := -shared
+
+    HSDIS_TOOLCHAIN := TOOLCHAIN_MINGW
+    HSDIS_TOOLCHAIN_CFLAGS :=
+    HSDIS_TOOLCHAIN_LDFLAGS := -L$(MINGW_GCC_LIB_PATH) -L$(MINGW_SYSROOT_LIB_PATH)
+    MINGW_DLLCRT := $(MINGW_SYSROOT_LIB_PATH)/dllcrt2.o
+    HSDIS_TOOLCHAIN_LIBS := $(MINGW_DLLCRT) -lmingw32 -lgcc -lgcc_eh -lmoldname \
+        -lmingwex -lmsvcrt -lpthread -ladvapi32 -lshell32 -luser32 -lkernel32
+  else
+    HSDIS_TOOLCHAIN_LIBS := -ldl
+  endif
+endif
+
+$(eval $(call SetupJdkLibrary, BUILD_HSDIS, \
+    NAME := hsdis, \
+    SRC := $(TOPDIR)/src/utils/hsdis/$(HSDIS_BACKEND), \
+    EXTRA_HEADER_DIRS := $(TOPDIR)/src/utils/hsdis, \
+    TOOLCHAIN := $(HSDIS_TOOLCHAIN), \
+    OUTPUT_DIR := $(HSDIS_OUTPUT_DIR), \
+    OBJECT_DIR := $(HSDIS_OUTPUT_DIR), \
+    DISABLED_WARNINGS_gcc := undef format-nonliteral sign-compare, \
+    DISABLED_WARNINGS_clang := undef format-nonliteral, \
+    CFLAGS := $(HSDIS_TOOLCHAIN_CFLAGS) $(HSDIS_CFLAGS), \
+    LDFLAGS := $(HSDIS_TOOLCHAIN_LDFLAGS) $(HSDIS_LDFLAGS) $(SHARED_LIBRARY_FLAGS), \
+    LIBS := $(HSDIS_LIBS) $(HSDIS_TOOLCHAIN_LIBS), \
+))
+
+$(BUILT_HSDIS_LIB): $(BUILD_HSDIS_TARGET)
+	$(install-file)
+
+build: $(BUILD_HSDIS) $(BUILT_HSDIS_LIB)
+
+TARGETS += build
+
+ifeq ($(ENABLE_HSDIS_BUNDLING), false)
+
+  ifeq ($(call isTargetOs, windows), true)
+    JDK_HSDIS_DIR := $(JDK_OUTPUTDIR)/bin
+    IMAGE_HSDIS_DIR := $(JDK_IMAGE_DIR)/bin
+  else
+    JDK_HSDIS_DIR := $(JDK_OUTPUTDIR)/lib
+    IMAGE_HSDIS_DIR := $(JDK_IMAGE_DIR)/lib
+  endif
+
+
+  INSTALLED_HSDIS_JDK := $(JDK_HSDIS_DIR)/$(REAL_HSDIS_NAME)
+  INSTALLED_HSDIS_IMAGE := $(IMAGE_HSDIS_DIR)/$(REAL_HSDIS_NAME)
+
+  $(INSTALLED_HSDIS_JDK): $(BUILT_HSDIS_LIB)
+          ifeq ($(HSDIS_BACKEND), binutils)
+	    $(call LogWarn, NOTE: The resulting build might not be redistributable. Seek legal advice before distributing.)
+          endif
+	$(install-file)
+
+  $(INSTALLED_HSDIS_IMAGE): $(BUILT_HSDIS_LIB)
+	$(install-file)
+
+  install: $(INSTALLED_HSDIS_JDK) $(INSTALLED_HSDIS_IMAGE)
+
+else
+
+  install:
+	$(ECHO) NOTE: make install-hsdis is a no-op with --enable-hsdis-bundling
+
+endif
+
+TARGETS += install
+
+################################################################################
+
+all: $(TARGETS)
+
+.PHONY: all default build install

make/Init.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2012, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -352,7 +352,7 @@ else # HAS_SPEC=true
 	$(call PrintFailureReports)
 	$(call PrintBuildLogFailures)
 	$(call ReportProfileTimes)
-	$(PRINTF) "Hint: See doc/building.html#troubleshooting for assistance.\n\n"
+	$(PRINTF) "HELP: Run 'make doctor' to diagnose build problems.\n\n"
         ifneq ($(COMPARE_BUILD), )
 	  $(call CleanupCompareBuild)
         endif

make/InitSupport.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2021, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -310,17 +310,9 @@ else # $(HAS_SPEC)=true
   # level of reproducible builds
   define SetupReproducibleBuild
     ifeq ($$(SOURCE_DATE), updated)
-      SOURCE_DATE := $$(shell $$(DATE) +"%s")
-    endif
-    export SOURCE_DATE_EPOCH := $$(SOURCE_DATE)
-    ifeq ($$(IS_GNU_DATE), yes)
-      export SOURCE_DATE_ISO_8601 := $$(shell $$(DATE) --utc \
-                                                       --date="@$$(SOURCE_DATE_EPOCH)" \
-                                                       +"%Y-%m-%dT%H:%M:%SZ" 2> /dev/null)
-    else
-      export SOURCE_DATE_ISO_8601 := $$(shell $$(DATE) -u \
-                                                       -j -f "%s" "$$(SOURCE_DATE_EPOCH)" \
-                                                       +"%Y-%m-%dT%H:%M:%SZ" 2> /dev/null)
+      # For static values of SOURCE_DATE (not "updated"), these are set in spec.gmk
+      export SOURCE_DATE_EPOCH := $$(shell $$(DATE) +"%s")
+      export SOURCE_DATE_ISO_8601 := $$(call EpochToISO8601, $$(SOURCE_DATE_EPOCH))
     endif
   endef
 
@@ -469,10 +461,10 @@ else # $(HAS_SPEC)=true
 	    $(PRINTF) "\n=== Make failed targets repeated here ===\n" ; \
 	    $(GREP) "recipe for target .* failed" $(BUILD_LOG) ; \
 	    $(PRINTF) "=== End of repeated output ===\n" ; \
-	    $(PRINTF) "\nHint: Try searching the build log for the name of the first failed target.\n" ; \
+	    $(PRINTF) "\nHELP: Try searching the build log for the name of the first failed target.\n" ; \
 	  else \
 	    $(PRINTF) "\nNo indication of failed target found.\n" ; \
-	    $(PRINTF) "Hint: Try searching the build log for '] Error'.\n" ; \
+	    $(PRINTF) "HELP: Try searching the build log for '] Error'.\n" ; \
 	  fi \
 	)
   endef

make/JBRApi.gmk

@@ -1,93 +0,0 @@
-#
-# Copyright 2000-2023 JetBrains s.r.o.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-include $(SPEC)
-include MakeBase.gmk
-include JavaCompilation.gmk
-
-JBR_API_ROOT_DIR   := $(TOPDIR)/src/jetbrains.api
-JBR_API_TOOLS_DIR  := $(JBR_API_ROOT_DIR)/tools
-JBR_API_SRC_DIR    := $(JBR_API_ROOT_DIR)/src
-JBR_API_OUTPUT_DIR := $(OUTPUTDIR)/jbr-api
-JBR_API_GENSRC_DIR := $(JBR_API_OUTPUT_DIR)/gensrc
-JBR_API_BIN_DIR    := $(JBR_API_OUTPUT_DIR)/bin
-JBR_API_VERSION_PROPERTIES := $(JBR_API_ROOT_DIR)/version.properties
-JBR_API_VERSION_GENSRC     := $(JBR_API_OUTPUT_DIR)/jbr-api.version
-JBR_API_GENSRC_BATCH       := $(JBR_API_VERSION_GENSRC)
-
-JBR_API_SRC_FILES := $(call FindFiles, $(JBR_API_SRC_DIR))
-JBR_API_GENSRC_FILES := $(foreach f, $(call FindFiles, $(JBR_API_SRC_DIR)), \
-    $(JBR_API_GENSRC_DIR)/$(call RelativePath, $f, $(JBR_API_SRC_DIR)))
-
-ifeq ($(JBR_API_JBR_VERSION),)
-  JBR_API_JBR_VERSION := DEVELOPMENT
-  JBR_API_FAIL_ON_HASH_MISMATCH := false
-else
-  .PHONY: $(JBR_API_VERSION_PROPERTIES)
-  JBR_API_FAIL_ON_HASH_MISMATCH := true
-endif
-
-ARCHIVE_BUILD_JBR_API_BIN := $(JBR_API_BIN_DIR)
-$(eval $(call SetupJavaCompilation, BUILD_JBR_API, \
-    SMALL_JAVA := true, \
-    COMPILER := bootjdk, \
-    SRC := $(JBR_API_GENSRC_DIR), \
-    EXTRA_FILES := $(JBR_API_GENSRC_FILES), \
-    BIN := $(JBR_API_BIN_DIR), \
-    JAR := $(JBR_API_OUTPUT_DIR)/jbr-api.jar, \
-))
-
-$(eval $(call SetupJarArchive, BUILD_JBR_API_SOURCES_JAR, \
-    DEPENDENCIES := $(JBR_API_GENSRC_FILES), \
-    SRCS := $(JBR_API_GENSRC_DIR), \
-    JAR := $(JBR_API_OUTPUT_DIR)/jbr-api-sources.jar, \
-    SUFFIXES := .java, \
-    BIN := $(JBR_API_BIN_DIR), \
-))
-
-# Grouped targets may not be supported, so hack dependencies: sources -> version file -> generated sources
-$(JBR_API_VERSION_GENSRC): $(JBR_API_SRC_FILES) $(JBR_API_VERSION_PROPERTIES) $(JBR_API_TOOLS_DIR)/Gensrc.java
-	$(ECHO) Generating sources for JBR API
-	$(JAVA_CMD) $(JAVA_FLAGS_SMALL) "$(JBR_API_TOOLS_DIR)/Gensrc.java" \
-	    "$(TOPDIR)/src" "$(JBR_API_OUTPUT_DIR)" "$(JBR_API_JBR_VERSION)"
-$(JBR_API_GENSRC_FILES): $(JBR_API_VERSION_GENSRC)
-	$(TOUCH) $@
-
-jbr-api-check-version: $(JBR_API_GENSRC_FILES) $(JBR_API_VERSION_PROPERTIES)
-	$(JAVA_CMD) $(JAVA_FLAGS_SMALL) "$(JBR_API_TOOLS_DIR)/CheckVersion.java" \
-	    "$(JBR_API_ROOT_DIR)" "$(JBR_API_GENSRC_DIR)" "$(JBR_API_FAIL_ON_HASH_MISMATCH)"
-
-jbr-api: $(BUILD_JBR_API) $(BUILD_JBR_API_SOURCES_JAR) jbr-api-check-version
-
-.PHONY: jbr-api jbr-api-check-version
-
-ifneq ($(JBR_API_CONF_FILE),)
-  $(JBR_API_CONF_FILE): $(JBR_API_GENSRC_FILES)
-	$(ECHO) "VERSION=`$(CAT) $(JBR_API_VERSION_GENSRC)`" > $(JBR_API_CONF_FILE)
-	$(ECHO) "JAR=$(JBR_API_OUTPUT_DIR)/jbr-api.jar" >> $(JBR_API_CONF_FILE)
-	$(ECHO) "SOURCES_JAR=$(JBR_API_OUTPUT_DIR)/jbr-api-sources.jar" >> $(JBR_API_CONF_FILE)
-  jbr-api: $(JBR_API_CONF_FILE)
-  .PHONY: $(JBR_API_CONF_FILE)
-endif

make/Main.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2021, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -260,6 +260,13 @@ $(eval $(call SetupTarget, hotspot-ide-project, \
 ALL_TARGETS += $(HOTSPOT_VARIANT_TARGETS) $(HOTSPOT_VARIANT_GENSRC_TARGETS) \
     $(HOTSPOT_VARIANT_LIBS_TARGETS)
 
+################################################################################
+# Help and user support
+
+$(eval $(call SetupTarget, doctor, \
+    MAKEFILE := Doctor, \
+))
+
 ################################################################################
 # Generate libs and launcher targets for creating compile_commands.json fragments
 define DeclareCompileCommandsRecipe
@@ -526,6 +533,19 @@ $(eval $(call SetupTarget, update-x11wrappers, \
     DEPS := java.base-copy buildtools-jdk, \
 ))
 
+ifneq ($(HSDIS_BACKEND), none)
+  $(eval $(call SetupTarget, build-hsdis, \
+      MAKEFILE := Hsdis, \
+      TARGET := build, \
+  ))
+
+  $(eval $(call SetupTarget, install-hsdis, \
+      MAKEFILE := Hsdis, \
+      TARGET := install, \
+      DEPS := jdk-image, \
+  ))
+endif
+
 ################################################################################
 # Cross compilation support
 
@@ -849,6 +869,10 @@ else
   $(foreach t, $(filter-out java.base-libs, $(LIBS_TARGETS)), \
       $(eval $t: java.base-libs))
 
+  ifeq ($(ENABLE_HSDIS_BUNDLING), true)
+    java.base-copy: build-hsdis
+  endif
+
   # jdk.accessibility depends on java.desktop
   jdk.accessibility-libs: java.desktop-libs
 
@@ -1325,14 +1349,6 @@ create-main-targets-include:
 	  @$(ECHO) ALL_MAIN_TARGETS := $(sort $(ALL_TARGETS)) > \
 	      $(MAKESUPPORT_OUTPUTDIR)/main-targets.gmk
 
-################################################################################
-# JBR API
-
-$(eval $(call SetupTarget, jbr-api, \
-    MAKEFILE := JBRApi, \
-    TARGET := jbr-api \
-))
-
 ################################################################################
 # Hook to include the corresponding custom file, if present.
 $(eval $(call IncludeCustomExtension, Main-post.gmk))

make/ModuleWrapper.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -35,6 +35,8 @@ default: all
 include $(SPEC)
 include MakeBase.gmk
 
+MODULE_SRC := $(TOPDIR)/src/$(MODULE)
+
 # All makefiles should add the targets to be built to this variable.
 TARGETS :=
 

make/ReleaseFile.gmk

@@ -51,7 +51,6 @@ define create-info-file
   $(if $(VENDOR_VERSION_STRING), \
     $(call info-file-item, "IMPLEMENTOR_VERSION", "$(VENDOR_VERSION_STRING)"))
   $(call info-file-item, "JAVA_VERSION_DATE", "$(VERSION_DATE)")
-  $(call info-file-item, "JAVA_RUNTIME_VERSION", "$(VERSION_STRING)")
   $(call info-file-item, "OS_NAME", "$(RELEASE_FILE_OS_NAME)")
   $(call info-file-item, "OS_ARCH", "$(RELEASE_FILE_OS_ARCH)")
   $(call info-file-item, "LIBC", "$(RELEASE_FILE_LIBC)")

make/RunTests.gmk

@@ -139,7 +139,7 @@ endif
 ################################################################################
 
 # Each factor variable comes in 3 variants. The first one is reserved for users
-# to use on command line. The other two are for predifined configurations in JDL
+# to use on command line. The other two are for predefined configurations in JDL
 # and for machine specific configurations respectively.
 TEST_JOBS_FACTOR ?= 1
 TEST_JOBS_FACTOR_JDL ?= 1
@@ -200,9 +200,10 @@ $(eval $(call SetTestOpt,FAILURE_HANDLER_TIMEOUT,JTREG))
 $(eval $(call ParseKeywordVariable, JTREG, \
     SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR FAILURE_HANDLER_TIMEOUT \
         TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM RUN_PROBLEM_LISTS \
-        RETRY_COUNT REPEAT_COUNT MAX_OUTPUT, \
+        RETRY_COUNT REPEAT_COUNT MAX_OUTPUT $(CUSTOM_JTREG_SINGLE_KEYWORDS), \
     STRING_KEYWORDS := OPTIONS JAVA_OPTIONS VM_OPTIONS KEYWORDS \
-        EXTRA_PROBLEM_LISTS LAUNCHER_OPTIONS, \
+        EXTRA_PROBLEM_LISTS LAUNCHER_OPTIONS \
+        $(CUSTOM_JTREG_STRING_KEYWORDS), \
 ))
 
 ifneq ($(JTREG), )
@@ -523,7 +524,7 @@ define SetupRunGtestTestBody
 	    $$(subst $$(TOPDIR)/, , $$($1_TEST_RESULTS_DIR))))
 	$$(if $$(wildcard $$($1_RESULT_FILE)), \
 	  $$(eval $1_TOTAL := $$(shell $$(AWK) '/==========.* tests? from .* \
-	      test cases? ran/ { print $$$$2 }' $$($1_RESULT_FILE))) \
+	      test (cases?|suites?) ran/ { print $$$$2 }' $$($1_RESULT_FILE))) \
 	  $$(if $$($1_TOTAL), , $$(eval $1_TOTAL := 0)) \
 	  $$(eval $1_PASSED := $$(shell $$(AWK) '/\[  PASSED  \] .* tests?./ \
 	      { print $$$$4 }' $$($1_RESULT_FILE))) \
@@ -781,8 +782,6 @@ define SetupRunJtregTestBody
   # Make it possible to specify the JIB_DATA_DIR for tests using the
   # JIB Artifact resolver
   $1_JTREG_BASIC_OPTIONS += -e:JIB_DATA_DIR
-  # Some tests needs to find a boot JDK using the JDK8_HOME variable.
-  $1_JTREG_BASIC_OPTIONS += -e:JDK8_HOME=$$(BOOT_JDK)
   # If running on Windows, propagate the _NT_SYMBOL_PATH to enable
   # symbol lookup in hserr files
   ifeq ($$(call isTargetOs, windows), true)
@@ -798,15 +797,6 @@ define SetupRunJtregTestBody
     $1_JTREG_BASIC_OPTIONS += -ea -esa
   endif
 
-  ifeq ($$(ASAN_ENABLED), yes)
-    $1_JTREG_BASIC_OPTIONS += -e:ASAN_OPTIONS=handle_segv=0:handle_sigfpe=0:detect_leaks=false
-    $1_JTREG_BASIC_OPTIONS += -e:LD_PRELOAD=libasan.so.5
-  endif
-
-  ifeq ($$(USAN_ENABLED), yes)
-    $1_JTREG_BASIC_OPTIONS += -e:LD_PRELOAD=libubsan.so.1
-  endif
-
   ifneq ($$($1_JTREG_NATIVEPATH), )
     $1_JTREG_BASIC_OPTIONS += -nativepath:$$($1_JTREG_NATIVEPATH)
   endif
@@ -850,6 +840,8 @@ define SetupRunJtregTestBody
     endif
   endif
 
+  $$(eval $$(call SetupRunJtregTestCustom, $1))
+
   clean-workdir-$1:
 	$$(RM) -r $$($1_TEST_SUPPORT_DIR)
 

make/SourceRevision.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2016, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2016, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -50,8 +50,8 @@ else ifneq ($(and $(GIT), $(wildcard $(TOPDIR)/.git)), )
   USE_SCM := true
   SCM_DIR := .git
   ID_COMMAND := $(PRINTF) "git:%s%s\n" \
-      "$$(git log -n1 --format=%H | cut -c1-12)" \
-      "$$(if test -n "$$(git status --porcelain)"; then printf '+'; fi)"
+      "$$($(GIT) log -n1 --format=%H | cut -c1-12)" \
+      "$$(if test -n "$$($(GIT) status --porcelain)"; then printf '+'; fi)"
 endif
 
 ifeq ($(USE_SCM), true)

make/ToolsJdk.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2021, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -44,16 +44,13 @@ TOOL_COMPILEFONTCONFIG = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_cla
     --add-exports java.desktop/sun.awt=ALL-UNNAMED \
     build.tools.compilefontconfig.CompileFontConfig
 
-TOOL_COMPILEPROPERTIES = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
-    build.tools.compileproperties.CompileProperties
-
 TOOL_GENERATECHARACTER = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
     build.tools.generatecharacter.GenerateCharacter
 
 TOOL_CHARACTERNAME = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
     build.tools.generatecharacter.CharacterName
 
-TOOL_DTDBUILDER = $(JAVA_SMALL) -Ddtd_home=$(TOPDIR)/make/data/dtdbuilder \
+TOOL_DTDBUILDER = $(JAVA_SMALL) -Ddtd_home=$(TOPDIR)/src/java.desktop/share/data/dtdbuilder \
     -Djava.awt.headless=true \
     -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes build.tools.dtdbuilder.DTDBuilder
 
@@ -75,6 +72,8 @@ TOOL_MAKEJAVASECURITY = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_clas
     build.tools.makejavasecurity.MakeJavaSecurity
 
 TOOL_GENERATECACERTS = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
+    -Dkeystore.pkcs12.certProtectionAlgorithm=NONE \
+    -Dkeystore.pkcs12.macAlgorithm=NONE \
     build.tools.generatecacerts.GenerateCacerts
 
 TOOL_GENERATEEMOJIDATA = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \

make/UpdateX11Wrappers.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2012, 2019, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -50,7 +50,7 @@ endif
 X11WRAPPERS_OUTPUT := $(SUPPORT_OUTPUTDIR)/x11wrappers
 GENERATOR_SOURCE_FILE := $(X11WRAPPERS_OUTPUT)/src/data_generator.c
 
-GENSRC_X11WRAPPERS_DATADIR := $(TOPDIR)/make/data/x11wrappergen
+GENSRC_X11WRAPPERS_DATADIR := $(TOPDIR)/src/java.desktop/unix/data/x11wrappergen
 WRAPPER_OUTPUT_FILE := $(GENSRC_X11WRAPPERS_DATADIR)/sizes-$(BITS).txt
 
 BITS := $(OPENJDK_TARGET_CPU_BITS)

make/ZipSource.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2022, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2020, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -31,7 +31,6 @@ include JavaCompilation.gmk
 include Modules.gmk
 
 SRC_ZIP_WORK_DIR := $(SUPPORT_OUTPUTDIR)/src
-$(if $(filter $(TOPDIR)/%, $(SUPPORT_OUTPUTDIR)), $(eval SRC_ZIP_BASE := $(TOPDIR)), $(eval SRC_ZIP_BASE := $(SUPPORT_OUTPUTDIR)))
 
 # Hook to include the corresponding custom file, if present.
 $(eval $(call IncludeCustomExtension, ZipSource.gmk))
@@ -46,10 +45,10 @@ ALL_MODULES := $(FindAllModules)
 # again to create src.zip.
 $(foreach m, $(ALL_MODULES), \
   $(foreach d, $(call FindModuleSrcDirs, $m), \
-    $(eval $d_TARGET := $(SRC_ZIP_WORK_DIR)/$(patsubst $(TOPDIR)/%,%,$(patsubst $(SUPPORT_OUTPUTDIR)/%,%,$d))/$m) \
+    $(eval $d_TARGET := $(SRC_ZIP_WORK_DIR)/$(patsubst $(TOPDIR)/%,%,$d)/$m) \
     $(if $(SRC_GENERATED), , \
       $(eval $$($d_TARGET): $d ; \
-          $$(if $(filter $(SRC_ZIP_BASE)/%, $d), $$(link-file-relative), $$(link-file-absolute)) \
+          $$(if $(filter $(TOPDIR)/%, $d), $$(link-file-relative), $$(link-file-absolute)) \
       ) \
     ) \
     $(eval SRC_ZIP_SRCS += $$($d_TARGET)) \

make/autoconf/basic.m4

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2021, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -55,7 +55,6 @@ AC_DEFUN([BASIC_CHECK_LEFTOVER_OVERRIDDEN],
 
 ###############################################################################
 # Setup basic configuration paths, and platform-specific stuff related to PATHs.
-# Make sure to only use tools set up in BASIC_SETUP_FUNDAMENTAL_TOOLS.
 AC_DEFUN_ONCE([BASIC_SETUP_PATHS],
 [
   # Save the current directory this script was started from
@@ -117,6 +116,82 @@ AC_DEFUN([BASIC_EVAL_BUILD_DEVKIT_VARIABLE],
   fi
 ])
 
+###############################################################################
+AC_DEFUN([BASIC_SETUP_XCODE_SYSROOT],
+[
+  AC_MSG_CHECKING([for sdk name])
+  AC_ARG_WITH([sdk-name], [AS_HELP_STRING([--with-sdk-name],
+      [use the Xcode platform SDK of the given name. @<:@macosx@:>@])],
+      [SDK_NAME=$with_sdk_name]
+  )
+  if test "x$SDK_NAME" = x; then
+    SDK_NAME=macosx
+  fi
+  AC_MSG_RESULT([$SDK_NAME])
+
+  if test "x$DEVKIT_ROOT" != x; then
+    # We need to use xcodebuild from the devkit, if provided
+    UTIL_LOOKUP_PROGS(XCODEBUILD, xcodebuild, $DEVKIT_TOOLCHAIN_PATH)
+    if test "x$XCODEBUILD" = x; then
+      AC_MSG_ERROR([No xcodebuild tool found in the provided devkit])
+    fi
+    XCODEBUILD_OUTPUT=`"$XCODEBUILD" -version 2>&1`
+    if test $? -ne 0; then
+      AC_MSG_ERROR([The xcodebuild tool in the devkit reports an error: $XCODEBUILD_OUTPUT])
+    fi
+  else
+    UTIL_LOOKUP_PROGS(XCODEBUILD, xcodebuild)
+    if test "x$XCODEBUILD" != x; then
+      XCODEBUILD_OUTPUT=`"$XCODEBUILD" -version 2>&1`
+      if test $? -ne 0; then
+        AC_MSG_WARN([Ignoring the located xcodebuild tool $XCODEBUILD due to an error: $XCODEBUILD_OUTPUT])
+        XCODEBUILD=
+      fi
+    fi
+  fi
+
+  if test "x$SYSROOT" != x; then
+    if ! test -f "$SYSROOT/System/Library/Frameworks/Foundation.framework/Headers/Foundation.h"; then
+      AC_MSG_ERROR([Invalid sysroot, framework headers not found])
+    fi
+    if test "x$with_sdk_name" != x; then
+      AC_MSG_WARN([--with-sdk-name will be ignored since a sysroot or devkit is provided])
+    fi
+    AC_MSG_NOTICE([Setting sysroot from devkit or --with-sysroot])
+  else
+    if test "x$XCODEBUILD" != x; then
+      SYSROOT=`"$XCODEBUILD" -sdk "$SDK_NAME" -version | $GREP '^Path: ' | $SED 's/Path: //'`
+      if test "x$SYSROOT" = x; then
+        AC_MSG_ERROR([No sysroot found for SDK $SDK_NAME from xcodebuild. Check your Xcode installation.])
+      fi
+      if ! test -f "$SYSROOT/System/Library/Frameworks/Foundation.framework/Headers/Foundation.h"; then
+        AC_MSG_ERROR([Unable to find required framework headers, provide a path to an SDK via --with-sysroot or --with-sdk-name and be sure Xcode is installed properly])
+      fi
+      AC_MSG_NOTICE([Setting sysroot from xcodebuild with SDK $SDK_NAME])
+    else
+      UTIL_LOOKUP_PROGS(XCRUN, xcrun)
+      if test "x$XCRUN" != x; then
+        XCRUN_SDK_PATH=`"$XCRUN" --show-sdk-path -sdk "$SDK_NAME"`
+      fi
+
+      if test "x$XCRUN_SDK_PATH" != x && test -f "$XCRUN_SDK_PATH/System/Library/Frameworks/Foundation.framework/Headers/Foundation.h"; then
+        AC_MSG_NOTICE([Setting sysroot from xcrun with SDK $SDK_NAME])
+        SYSROOT="$XCRUN_SDK_PATH"
+      elif test -f /System/Library/Frameworks/Foundation.framework/Headers/Foundation.h; then
+        AC_MSG_WARN([No devkit provided and no xcodebuild found. Proceeding using system headers.])
+        if test "x$with_sdk_name" != x; then
+          AC_MSG_WARN([--with-sdk-name will be ignored since no xcodebuild could be found])
+        fi
+      else
+        AC_MSG_NOTICE([No devkit provided, no xcodebuild tool and no system headers found in the system.])
+        AC_MSG_NOTICE([Check that Xcode is properly installed, or set a devkit with --with-devkit,])
+        AC_MSG_NOTICE([or override SDK selection using --with-sysroot or --with-sdk-name.])
+        AC_MSG_ERROR([Cannot continue])
+      fi
+    fi
+  fi
+])
+
 ###############################################################################
 AC_DEFUN_ONCE([BASIC_SETUP_DEVKIT],
 [
@@ -173,7 +248,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_DEVKIT],
     UTIL_PREPEND_TO_PATH([TOOLCHAIN_PATH],$DEVKIT_TOOLCHAIN_PATH)
 
     # If DEVKIT_SYSROOT is set, use that, otherwise try a couple of known
-    # places for backwards compatiblity.
+    # places for backwards compatibility.
     if test "x$DEVKIT_SYSROOT" != x; then
       SYSROOT="$DEVKIT_SYSROOT"
     elif test -d "$DEVKIT_ROOT/$host_alias/libc"; then
@@ -194,7 +269,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_DEVKIT],
   # You can force the sysroot if the sysroot encoded into the compiler tools
   # is not correct.
   AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root],
-      [alias for --with-sysroot for backwards compatability])],
+      [alias for --with-sysroot for backwards compatibility])],
       [SYSROOT=$with_sys_root]
   )
 
@@ -213,95 +288,13 @@ AC_DEFUN_ONCE([BASIC_SETUP_DEVKIT],
       [UTIL_PREPEND_TO_PATH([TOOLCHAIN_PATH],$with_toolchain_path)]
   )
 
-  AC_ARG_WITH([xcode-path], [AS_HELP_STRING([--with-xcode-path],
-      [set up toolchain on Mac OS using a path to an Xcode installation])])
-
-  if test "x$with_xcode_path" != x; then
-    if test "x$OPENJDK_BUILD_OS" = "xmacosx"; then
-      UTIL_PREPEND_TO_PATH([TOOLCHAIN_PATH],
-          $with_xcode_path/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin:$with_xcode_path/Contents/Developer/usr/bin)
-    else
-      AC_MSG_WARN([Option --with-xcode-path is only valid on Mac OS, ignoring.])
-    fi
-  fi
-
   AC_ARG_WITH([extra-path], [AS_HELP_STRING([--with-extra-path],
       [prepend these directories to the default path])],
       [UTIL_PREPEND_TO_PATH([EXTRA_PATH],$with_extra_path)]
   )
 
   if test "x$OPENJDK_BUILD_OS" = "xmacosx"; then
-    # If a devkit has been supplied, find xcodebuild in the toolchain_path.
-    # If not, detect if Xcode is installed by running xcodebuild -version
-    # if no Xcode installed, xcodebuild exits with 1
-    # if Xcode is installed, even if xcode-select is misconfigured, then it exits with 0
-    if test "x$DEVKIT_ROOT" != x || test "x$TOOLCHAIN_PATH" != x || /usr/bin/xcodebuild -version >/dev/null 2>&1; then
-      # We need to use xcodebuild in the toolchain dir provided by the user
-      UTIL_LOOKUP_PROGS(XCODEBUILD, xcodebuild, $TOOLCHAIN_PATH)
-      if test x$XCODEBUILD = x; then
-        # fall back on the stub binary in /usr/bin/xcodebuild
-        XCODEBUILD=/usr/bin/xcodebuild
-      fi
-    else
-      # this should result in SYSROOT being empty, unless --with-sysroot is provided
-      # when only the command line tools are installed there are no SDKs, so headers
-      # are copied into the system frameworks
-      XCODEBUILD=
-      AC_SUBST(XCODEBUILD)
-    fi
-
-    AC_MSG_CHECKING([for sdk name])
-    AC_ARG_WITH([sdk-name], [AS_HELP_STRING([--with-sdk-name],
-        [use the platform SDK of the given name. @<:@macosx@:>@])],
-        [SDKNAME=$with_sdk_name]
-    )
-    AC_MSG_RESULT([$SDKNAME])
-
-    # if toolchain path is specified then don't rely on system headers, they may not compile
-    HAVE_SYSTEM_FRAMEWORK_HEADERS=0
-    test -z "$TOOLCHAIN_PATH" && \
-      HAVE_SYSTEM_FRAMEWORK_HEADERS=`test ! -f /System/Library/Frameworks/Foundation.framework/Headers/Foundation.h; echo $?`
-
-    if test -z "$SYSROOT"; then
-      if test -n "$XCODEBUILD"; then
-        # if we don't have system headers, use default SDK name (last resort)
-        if test -z "$SDKNAME" -a $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0; then
-          SDKNAME=${SDKNAME:-macosx}
-        fi
-
-        if test -n "$SDKNAME"; then
-          # Call xcodebuild to determine SYSROOT
-          SYSROOT=`"$XCODEBUILD" -sdk $SDKNAME -version | $GREP '^Path: ' | $SED 's/Path: //'`
-        fi
-      else
-        if test $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0; then
-          AC_MSG_ERROR([No xcodebuild tool and no system framework headers found, use --with-sysroot or --with-sdk-name to provide a path to a valid SDK])
-        fi
-      fi
-    else
-      # warn user if --with-sdk-name was also set
-      if test -n "$with_sdk_name"; then
-        AC_MSG_WARN([Both SYSROOT and --with-sdk-name are set, only SYSROOT will be used])
-      fi
-    fi
-
-    if test $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0 -a -z "$SYSROOT"; then
-      # If no system framework headers, then SYSROOT must be set, or we won't build
-      AC_MSG_ERROR([Unable to determine SYSROOT and no headers found in /System/Library/Frameworks. Check Xcode configuration, --with-sysroot or --with-sdk-name arguments.])
-    fi
-
-    # Perform a basic sanity test
-    if test ! -f "$SYSROOT/System/Library/Frameworks/Foundation.framework/Headers/Foundation.h"; then
-      if test -z "$SYSROOT"; then
-        AC_MSG_ERROR([Unable to find required framework headers, provide a path to an SDK via --with-sysroot or --with-sdk-name and be sure Xcode is installed properly])
-      else
-        AC_MSG_ERROR([Invalid SDK or SYSROOT path, dependent framework headers not found])
-      fi
-    fi
-
-    # set SDKROOT too, Xcode tools will pick it up
-    SDKROOT="$SYSROOT"
-    AC_SUBST(SDKROOT)
+    BASIC_SETUP_XCODE_SYSROOT
   fi
 
   # Prepend the extra path to the global path
@@ -309,9 +302,12 @@ AC_DEFUN_ONCE([BASIC_SETUP_DEVKIT],
 
   AC_MSG_CHECKING([for sysroot])
   AC_MSG_RESULT([$SYSROOT])
+  AC_SUBST(SYSROOT)
+
   AC_MSG_CHECKING([for toolchain path])
   AC_MSG_RESULT([$TOOLCHAIN_PATH])
   AC_SUBST(TOOLCHAIN_PATH)
+
   AC_MSG_CHECKING([for extra path])
   AC_MSG_RESULT([$EXTRA_PATH])
 ])
@@ -451,7 +447,9 @@ AC_DEFUN([BASIC_CHECK_DIR_ON_LOCAL_DISK],
 AC_DEFUN_ONCE([BASIC_CHECK_SRC_PERMS],
 [
   if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-    file_to_test="$TOPDIR/LICENSE"
+    # The choice of file here is somewhat arbitrary, it just needs to be there
+    # in the source tree when configure runs
+    file_to_test="$TOPDIR/Makefile"
     if test `$STAT -c '%a' "$file_to_test"` -lt 400; then
       AC_MSG_ERROR([Bad file permissions on src files. This is usually caused by cloning the repositories with a non cygwin hg in a directory not created in cygwin.])
     fi
@@ -507,7 +505,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_DEFAULT_MAKE_TARGET],
 AC_DEFUN_ONCE([BASIC_SETUP_DEFAULT_LOG],
 [
   AC_ARG_WITH(log, [AS_HELP_STRING([--with-log],
-      [[default vaue for make LOG argument [warn]]])])
+      [[default value for make LOG argument [warn]]])])
   AC_MSG_CHECKING([for default LOG value])
   if test "x$with_log" = x; then
     DEFAULT_LOG=""

make/autoconf/basic_tools.m4

@@ -24,8 +24,8 @@
 #
 
 ###############################################################################
-# Setup the most fundamental tools, used for setting up build platform and
-# path handling.
+# Setup the most fundamental tools that relies on not much else to set up,
+# but is used by much of the early bootstrap code.
 AC_DEFUN_ONCE([BASIC_SETUP_FUNDAMENTAL_TOOLS],
 [
   # Bootstrapping: These tools are needed by UTIL_LOOKUP_PROGS
@@ -37,28 +37,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_FUNDAMENTAL_TOOLS],
   UTIL_CHECK_NONEMPTY(FILE)
   AC_PATH_PROGS(LDD, ldd)
 
-  # Required tools
-  UTIL_REQUIRE_PROGS(ECHO, echo)
-  UTIL_REQUIRE_PROGS(TR, tr)
-  UTIL_REQUIRE_PROGS(UNAME, uname)
-  UTIL_REQUIRE_PROGS(WC, wc)
-
-  # Required tools with some special treatment
-  UTIL_REQUIRE_SPECIAL(GREP, [AC_PROG_GREP])
-  UTIL_REQUIRE_SPECIAL(EGREP, [AC_PROG_EGREP])
-  UTIL_REQUIRE_SPECIAL(SED, [AC_PROG_SED])
-
-  # Tools only needed on some platforms
-  UTIL_LOOKUP_PROGS(PATHTOOL, cygpath wslpath)
-  UTIL_LOOKUP_PROGS(CMD, cmd.exe, $PATH:/cygdrive/c/windows/system32:/mnt/c/windows/system32:/c/windows/system32)
-])
-
-###############################################################################
-# Setup further tools that should be resolved early but after setting up
-# build platform and path handling.
-AC_DEFUN_ONCE([BASIC_SETUP_TOOLS],
-[
-  # Required tools
+  # First are all the fundamental required tools.
   UTIL_REQUIRE_PROGS(BASH, bash)
   UTIL_REQUIRE_PROGS(CAT, cat)
   UTIL_REQUIRE_PROGS(CHMOD, chmod)
@@ -66,6 +45,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_TOOLS],
   UTIL_REQUIRE_PROGS(CUT, cut)
   UTIL_REQUIRE_PROGS(DATE, date)
   UTIL_REQUIRE_PROGS(DIFF, gdiff diff)
+  UTIL_REQUIRE_PROGS(ECHO, echo)
   UTIL_REQUIRE_PROGS(EXPR, expr)
   UTIL_REQUIRE_PROGS(FIND, find)
   UTIL_REQUIRE_PROGS(GUNZIP, gunzip)
@@ -87,18 +67,27 @@ AC_DEFUN_ONCE([BASIC_SETUP_TOOLS],
   UTIL_REQUIRE_PROGS(TAR, gtar tar)
   UTIL_REQUIRE_PROGS(TEE, tee)
   UTIL_REQUIRE_PROGS(TOUCH, touch)
+  UTIL_REQUIRE_PROGS(TR, tr)
+  UTIL_REQUIRE_PROGS(UNAME, uname)
+  UTIL_REQUIRE_PROGS(WC, wc)
   UTIL_REQUIRE_PROGS(XARGS, xargs)
 
-  # Required tools with some special treatment
+  # Then required tools that require some special treatment.
+  UTIL_REQUIRE_SPECIAL(GREP, [AC_PROG_GREP])
+  UTIL_REQUIRE_SPECIAL(EGREP, [AC_PROG_EGREP])
   UTIL_REQUIRE_SPECIAL(FGREP, [AC_PROG_FGREP])
+  UTIL_REQUIRE_SPECIAL(SED, [AC_PROG_SED])
 
   # Optional tools, we can do without them
   UTIL_LOOKUP_PROGS(DF, df)
+  UTIL_LOOKUP_PROGS(GIT, git)
   UTIL_LOOKUP_PROGS(NICE, nice)
   UTIL_LOOKUP_PROGS(READLINK, greadlink readlink)
 
-  # Tools only needed on some platforms
+  # These are only needed on some platforms
+  UTIL_LOOKUP_PROGS(PATHTOOL, cygpath wslpath)
   UTIL_LOOKUP_PROGS(LSB_RELEASE, lsb_release)
+  UTIL_LOOKUP_PROGS(CMD, cmd.exe, $PATH:/cygdrive/c/windows/system32:/mnt/c/windows/system32:/c/windows/system32)
 
   # For compare.sh only
   UTIL_LOOKUP_PROGS(CMP, cmp)
@@ -354,7 +343,6 @@ AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
   UTIL_LOOKUP_PROGS(READELF, greadelf readelf)
   UTIL_LOOKUP_PROGS(DOT, dot)
   UTIL_LOOKUP_PROGS(HG, hg)
-  UTIL_LOOKUP_PROGS(GIT, git)
   UTIL_LOOKUP_PROGS(STAT, stat)
   UTIL_LOOKUP_PROGS(TIME, time)
   UTIL_LOOKUP_PROGS(FLOCK, flock)
@@ -363,7 +351,7 @@ AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
   UTIL_LOOKUP_PROGS(DTRACE, dtrace, $PATH:/usr/sbin)
   UTIL_LOOKUP_PROGS(PATCH, gpatch patch)
   # Check if it's GNU time
-  IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
+  [ IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU [Tt]ime'` ]
   if test "x$IS_GNU_TIME" != x; then
     IS_GNU_TIME=yes
   else
@@ -388,6 +376,41 @@ AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
     UTIL_REQUIRE_PROGS(MIG, mig)
     UTIL_REQUIRE_PROGS(XATTR, xattr)
     UTIL_LOOKUP_PROGS(CODESIGN, codesign)
+
+    # Check for user provided code signing identity.
+    UTIL_ARG_WITH(NAME: macosx-codesign-identity, TYPE: string,
+        DEFAULT: openjdk_codesign, CHECK_VALUE: UTIL_CHECK_STRING_NON_EMPTY,
+        DESC: [specify the macosx code signing identity],
+        CHECKING_MSG: [for macosx code signing identity]
+    )
+    AC_SUBST(MACOSX_CODESIGN_IDENTITY)
+
+    if test "x$CODESIGN" != "x"; then
+      # Verify that the codesign certificate is present
+      AC_MSG_CHECKING([if codesign certificate is present])
+      $RM codesign-testfile
+      $TOUCH codesign-testfile
+      $CODESIGN -s "$MACOSX_CODESIGN_IDENTITY" codesign-testfile 2>&AS_MESSAGE_LOG_FD \
+          >&AS_MESSAGE_LOG_FD || CODESIGN=
+      $RM codesign-testfile
+      if test "x$CODESIGN" = x; then
+        AC_MSG_RESULT([no])
+      else
+        AC_MSG_RESULT([yes])
+        # Verify that the codesign has --option runtime
+        AC_MSG_CHECKING([if codesign has --option runtime])
+        $RM codesign-testfile
+        $TOUCH codesign-testfile
+        $CODESIGN --option runtime -s "$MACOSX_CODESIGN_IDENTITY" codesign-testfile \
+            2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
+        $RM codesign-testfile
+        if test "x$CODESIGN" = x; then
+          AC_MSG_ERROR([codesign does not have --option runtime. macOS 10.13.6 and above is required.])
+        else
+          AC_MSG_RESULT([yes])
+        fi
+      fi
+    fi
     UTIL_REQUIRE_PROGS(SETFILE, SetFile)
   fi
   if ! test "x$OPENJDK_TARGET_OS" = "xwindows"; then

make/autoconf/basic_windows.m4

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -34,9 +34,10 @@ AC_DEFUN([BASIC_SETUP_PATHS_WINDOWS],
       OPENJDK_BUILD_OS_ENV=windows.wsl1
     else
       # This test is not guaranteed, but there is no documented way of
-      # distinguishing between WSL1 and WSL2. Assume only WSL2 has WSL_INTEROP
-      # in /run/WSL
-      if test -d "/run/WSL" ; then
+      # distinguishing between WSL1 and WSL2.
+      # Check whether "Hyper-V" appears in /proc/interrupts because WSL2 runs on Hyper-V.
+      $GREP -q Hyper-V /proc/interrupts
+      if test $? -eq 0; then
         OPENJDK_BUILD_OS_ENV=windows.wsl2
       else
         OPENJDK_BUILD_OS_ENV=windows.wsl1
@@ -184,6 +185,16 @@ AC_DEFUN([BASIC_SETUP_PATHS_WINDOWS],
     AC_MSG_RESULT([unknown])
     AC_MSG_WARN([It seems that your find utility is non-standard.])
   fi
+
+  if test "x$GIT" != x && test -e $TOPDIR/.git; then
+    git_autocrlf=`$GIT config core.autocrlf`
+    if test "x$git_autocrlf" != x && test "x$git_autocrlf" != "xfalse"; then
+      AC_MSG_NOTICE([Your git configuration does not set core.autocrlf to false.])
+      AC_MSG_NOTICE([If you checked out this code using that setting, the build WILL fail.])
+      AC_MSG_NOTICE([To correct, run "git config --global core.autocrlf false" and re-clone the repo.])
+      AC_MSG_WARN([Code is potentially incorrectly cloned. HIGH RISK of build failure!])
+    fi
+  fi
 ])
 
 # Verify that the directory is usable on Windows

make/autoconf/boot-jdk.m4

@@ -27,7 +27,7 @@
 # This file handles detection of the Boot JDK. The Boot JDK detection
 # process has been developed as a response to solve a complex real-world
 # problem. Initially, it was simple, but it has grown as platform after
-# platform, idiosyncracy after idiosyncracy has been supported.
+# platform, idiosyncrasy after idiosyncrasy has been supported.
 #
 # The basic idea is this:
 # 1) You need an acceptable *) JDK to use as a Boot JDK
@@ -300,6 +300,28 @@ AC_DEFUN([BOOTJDK_CHECK_TOOL_IN_BOOTJDK],
     ])
 ])
 
+# Setup CLASSPATH environment variable
+AC_DEFUN([BOOTJDK_SETUP_CLASSPATH],
+[
+  AC_ARG_WITH([classpath], [AS_HELP_STRING([--with-classpath],
+      [Optional classpath to set as CLASSPATH to all Java invocations @<:@none@:>@])])
+
+  if test "x$CLASSPATH" != x; then
+    AC_MSG_WARN([CLASSPATH is set in the environment. This will be ignored. Use --with-classpath instead.])
+  fi
+
+  CLASSPATH=
+
+  if test "x$with_classpath" != x && test "x$with_classpath" != xyes &&
+      test "x$with_classpath" != xno ; then
+    CLASSPATH="$with_classpath"
+    AC_MSG_CHECKING([for classpath to use for all Java invocations])
+    AC_MSG_RESULT([$CLASSPATH])
+  fi
+
+  AC_SUBST(CLASSPATH)
+])
+
 ###############################################################################
 #
 # We need a Boot JDK to bootstrap the build.
@@ -406,6 +428,8 @@ AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK],
     BOOTJDK_USE_LOCAL_CDS=false
     AC_MSG_RESULT([no, -XX:SharedArchiveFile not supported])
   fi
+
+  BOOTJDK_SETUP_CLASSPATH
 ])
 
 AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK_ARGUMENTS],

make/autoconf/build-aux/config.guess

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Copyright (c) 2012, 2021, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2022, Oracle and/or its affiliates. All rights reserved.
 # Copyright (c) 2021, Azul Systems, Inc. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
@@ -29,40 +29,7 @@
 # and fix the broken property, if needed.
 
 DIR=`dirname $0`
-OUT=`. $DIR/autoconf-config.guess 2> /dev/null`
-
-# Handle some cases that autoconf-config.guess is not capable of
-if [ "x$OUT" = x ]; then
-  if [ `uname -s` = Linux ]; then
-    # Test and fix little endian MIPS.
-    if [ `uname -m` = mipsel ]; then
-      OUT=mipsel-unknown-linux-gnu
-    elif [ `uname -m` = mips64el ]; then
-      OUT=mips64el-unknown-linux-gnu
-    # Test and fix little endian PowerPC64.
-    elif [ `uname -m` = ppc64le ]; then
-      OUT=powerpc64le-unknown-linux-gnu
-    # Test and fix LoongArch64.
-    elif [ `uname -m` = loongarch64 ]; then
-      OUT=loongarch64-unknown-linux-gnu
-    # Test and fix RISC-V.
-    elif [ `uname -m` = riscv64 ]; then
-      OUT=riscv64-unknown-linux-gnu
-    fi
-  # Test and fix cygwin machine arch .x86_64
-  elif [[ `uname -s` = CYGWIN* ]]; then
-    if [ `uname -m` = ".x86_64" ]; then
-      OUT=x86_64-unknown-cygwin
-    fi
-  fi
-
-  if [ "x$OUT" = x ]; then
-    # Run autoconf-config.guess again to get the error message.
-    . $DIR/autoconf-config.guess > /dev/null
-  else
-    printf "guessed by custom config.guess... " >&2
-  fi
-fi
+OUT=`. $DIR/autoconf-config.guess`
 
 # Detect C library.
 # Use '-gnu'  suffix on systems that use glibc.
@@ -100,7 +67,7 @@ fi
 
 # Test and fix architecture string on AIX
 # On AIX 'config.guess' returns 'powerpc' as architecture but 'powerpc' is
-# implicitely handled as 32-bit architecture in 'platform.m4' so we check
+# implicitly handled as 32-bit architecture in 'platform.m4' so we check
 # for the kernel mode rewrite it to 'powerpc64' if we'Re running in 64-bit mode.
 # The check could also be done with `/usr/sbin/prtconf | grep "Kernel Type" | grep "64-bit"`
 echo $OUT | grep powerpc-ibm-aix > /dev/null 2> /dev/null
@@ -114,6 +81,45 @@ if test $? = 0; then
   OUT=powerpc$KERNEL_BITMODE`echo $OUT | sed -e 's/[^-]*//'`
 fi
 
+# Test and fix little endian PowerPC64.
+# TODO: should be handled by autoconf-config.guess.
+if [ "x$OUT" = x ]; then
+  if [ `uname -m` = ppc64le ]; then
+    if [ `uname -s` = Linux ]; then
+      OUT=powerpc64le-unknown-linux-gnu
+    fi
+  fi
+fi
+
+# Test and fix little endian MIPS.
+if [ "x$OUT" = x ]; then
+  if [ `uname -s` = Linux ]; then
+    if [ `uname -m` = mipsel ]; then
+      OUT=mipsel-unknown-linux-gnu
+    elif [ `uname -m` = mips64el ]; then
+      OUT=mips64el-unknown-linux-gnu
+    fi
+  fi
+fi
+
+# Test and fix LoongArch64.
+if [ "x$OUT" = x ]; then
+  if [ `uname -s` = Linux ]; then
+    if [ `uname -m` = loongarch64 ]; then
+      OUT=loongarch64-unknown-linux-gnu
+    fi
+  fi
+fi
+
+# Test and fix RISC-V.
+if [ "x$OUT" = x ]; then
+  if [ `uname -s` = Linux ]; then
+    if [ `uname -m` = riscv64 ]; then
+      OUT=riscv64-unknown-linux-gnu
+    fi
+  fi
+fi
+
 # Test and fix cpu on macos-aarch64, uname -p reports arm, buildsys expects aarch64
 echo $OUT | grep arm-apple-darwin > /dev/null 2> /dev/null
 if test $? != 0; then

make/autoconf/build-aux/config.sub

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Copyright (c) 2014, 2020, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2022, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -46,6 +46,13 @@ if echo $* | grep pc-msys >/dev/null ; then
     exit
 fi
 
+# Canonicalize for riscv which autoconf-config.sub doesn't handle
+if echo $* | grep '^riscv\(32\|64\)-linux' >/dev/null ; then
+    result=`echo $@ | sed 's/linux/unknown-linux/'`
+    echo $result
+    exit
+fi
+
 # Filter out everything that doesn't begin with "aarch64-"
 if ! echo $* | grep '^aarch64-' >/dev/null ; then
     . $DIR/autoconf-config.sub "$@"
@@ -78,4 +85,3 @@ result=`echo $result | sed "s/^arm-/aarch64-/"`
 
 echo $result
 exit $exitcode
-