8236405: Formatting issues in Kerberos debug output

Reviewed-by: mullan

.hgtags

@@ -583,3 +583,24 @@ c0023e364b6f130cb1e93747b796d8718d544db1 jdk-14+8
 18f189e69b29f8215a3500b875127ed4fb2d977a jdk-14+9
 ececb6dae777e622abda42c705fd984a42f46b5a jdk-14+10
 bf4c808a4488025a415f867e54c8b088417e08a0 jdk-14+11
+8570f22b9b6ac6bec673899b582150865696e425 jdk-14+12
+fbbe6672ae15deaf350a9e935290a36f57ba9c25 jdk-14+13
+cddef3bde924f3ff4f17f3d369280cf69d0450e5 jdk-14+14
+9c250a7600e12bdb1e611835250af3204d4aa152 jdk-13-ga
+778fc2dcbdaa8981e07e929a2cacef979c72261e jdk-14+15
+d29f0181ba424a95d881aba5eabf2e393abcc70f jdk-14+16
+5c83830390baafb76a1fbe33443c57620bd45fb9 jdk-14+17
+e84d8379815ba0d3e50fb096d28c25894cb50b8c jdk-14+18
+9b67dd88a9313e982ec5f710a7747161bc8f0c23 jdk-14+19
+54ffb15c48399dd59922ee22bb592d815307e77c jdk-14+20
+c16ac7a2eba4e73cb4f7ee9294dd647860eebff0 jdk-14+21
+83810b7d12e7ff761ad3dd91f323a22dad96f108 jdk-14+22
+15936b142f86731afa4b1a2c0fe4a01e806c4944 jdk-14+23
+438337c846fb071900ddb6922bddf8b3e895a514 jdk-14+24
+17d242844fc9e7d18b3eac97426490a9c246119e jdk-14+25
+288777cf0702914e5266bc1e5d380eed9032ca41 jdk-14+26
+2c724dba4c3cf9516b2152e151c9aea66b21b30b jdk-15+0
+91a3f092682fc715d991a87eb6ec6f28886d2035 jdk-14+27
+63e17cf29bed191ea21020b4648c9cdf893f80f5 jdk-15+1
+2069b4bfd23b56b6fc659fba8b75aaaa23debbe0 jdk-14+28
+f33197adda9ad82fdef46ac0f7dc0126204f35b2 jdk-15+2

doc/building.html

@@ -161,6 +161,7 @@
 <p>Even for 32-bit builds, it is recommended to use a 64-bit build machine, and instead create a 32-bit target using <code>--with-target-bits=32</code>.</p>
 <h3 id="building-on-sparc">Building on sparc</h3>
 <p>At a minimum, a machine with 4 cores is advisable, as well as 4 GB of RAM. (The more cores to use, the more memory you need.) At least 8 GB of free disk space is required.</p>
+<p>Note: The sparc port is deprecated.</p>
 <h3 id="building-on-aarch64">Building on aarch64</h3>
 <p>At a minimum, a machine with 8 cores is advisable, as well as 8 GB of RAM. (The more cores to use, the more memory you need.) At least 6 GB of free disk space is required.</p>
 <p>If you do not have access to sufficiently powerful hardware, it is also possible to use <a href="#cross-compiling">cross-compiling</a>.</p>
@@ -225,6 +226,7 @@
 <h3 id="solaris">Solaris</h3>
 <p>See <code>make/devkit/solaris11.1-package-list.txt</code> for a list of recommended packages to install when building on Solaris. The versions specified in this list is the versions used by the daily builds at Oracle, and is likely to work properly.</p>
 <p>Older versions of Solaris shipped a broken version of <code>objcopy</code>. At least version 2.21.1 is needed, which is provided by Solaris 11 Update 1. Objcopy is needed if you want to have external debug symbols. Please make sure you are using at least version 2.21.1 of objcopy, or that you disable external debug symbols.</p>
+<p>Note: The Solaris port is deprecated.</p>
 <h3 id="macos">macOS</h3>
 <p>Apple is using a quite aggressive scheme of pushing OS updates, and coupling these updates with required updates of Xcode. Unfortunately, this makes it difficult for a project such as the JDK to keep pace with a continuously updated machine running macOS. See the section on <a href="#apple-xcode">Apple Xcode</a> on some strategies to deal with this.</p>
 <p>It is recommended that you use at least Mac OS X 10.13 (High Sierra). At the time of writing, the JDK has been successfully compiled on macOS 10.12 (Sierra).</p>
@@ -281,7 +283,7 @@
 <tbody>
 <tr class="odd">
 <td style="text-align: left;">Linux</td>
-<td style="text-align: left;">gcc 8.2.0</td>
+<td style="text-align: left;">gcc 8.3.0</td>
 </tr>
 <tr class="even">
 <td style="text-align: left;">macOS</td>
@@ -293,14 +295,14 @@
 </tr>
 <tr class="even">
 <td style="text-align: left;">Windows</td>
-<td style="text-align: left;">Microsoft Visual Studio 2017 update 15.9.6</td>
+<td style="text-align: left;">Microsoft Visual Studio 2017 update 15.9.16</td>
 </tr>
 </tbody>
 </table>
 <p>All compilers are expected to be able to compile to the C99 language standard, as some C99 features are used in the source code. Microsoft Visual Studio doesn't fully support C99 so in practice shared code is limited to using C99 features that it does support.</p>
 <h3 id="gcc">gcc</h3>
 <p>The minimum accepted version of gcc is 4.8. Older versions will generate a warning by <code>configure</code> and are unlikely to work.</p>
-<p>The JDK is currently known to be able to compile with at least version 7.4 of gcc.</p>
+<p>The JDK is currently known to be able to compile with at least version 8.3 of gcc.</p>
 <p>In general, any version between these two should be usable.</p>
 <h3 id="clang">clang</h3>
 <p>The minimum accepted version of clang is 3.2. Older versions will not be accepted by <code>configure</code>.</p>
@@ -385,10 +387,10 @@ CC: Sun C++ 5.13 SunOS_i386 151846-10 2015/10/30</code></pre>
 <p>On Linux you can also get a JDK from the Linux distribution. On apt-based distros (like Debian and Ubuntu), <code>sudo apt-get install openjdk-&lt;VERSION&gt;-jdk</code> is typically enough to install a JDK &lt;VERSION&gt;. On rpm-based distros (like Fedora and Red Hat), try <code>sudo yum install java-&lt;VERSION&gt;-openjdk-devel</code>.</p>
 <h2 id="external-library-requirements">External Library Requirements</h2>
 <p>Different platforms require different external libraries. In general, libraries are not optional - that is, they are either required or not used.</p>
-<p>If a required library is not detected by <code>configure</code>, you need to provide the path to it. There are two forms of the <code>configure</code> arguments to point to an external library: <code>--with-&lt;LIB&gt;=&lt;path&gt;</code> or <code>--with-&lt;LIB&gt;-include=&lt;path to include&gt; --with-&lt;LIB&gt;-lib=&lt;path to lib&gt;</code>. The first variant is more concise, but require the include files an library files to reside in a default hierarchy under this directory. In most cases, it works fine.</p>
+<p>If a required library is not detected by <code>configure</code>, you need to provide the path to it. There are two forms of the <code>configure</code> arguments to point to an external library: <code>--with-&lt;LIB&gt;=&lt;path&gt;</code> or <code>--with-&lt;LIB&gt;-include=&lt;path to include&gt; --with-&lt;LIB&gt;-lib=&lt;path to lib&gt;</code>. The first variant is more concise, but require the include files and library files to reside in a default hierarchy under this directory. In most cases, it works fine.</p>
 <p>As a fallback, the second version allows you to point to the include directory and the lib directory separately.</p>
 <h3 id="freetype">FreeType</h3>
-<p>FreeType2 from <a href="http://www.freetype.org/">The FreeType Project</a> is not required on any platform. The exception is on Unix-based platforms when configuring such that the build artifacts will reference a system installed library, rather than bundling the JDK’s own copy.</p>
+<p>FreeType2 from <a href="http://www.freetype.org/">The FreeType Project</a> is not required on any platform. The exception is on Unix-based platforms when configuring such that the build artifacts will reference a system installed library, rather than bundling the JDK's own copy.</p>
 <ul>
 <li>To install on an apt-based Linux, try running <code>sudo apt-get install libfreetype6-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running <code>sudo yum install freetype-devel</code>.</li>
@@ -449,7 +451,7 @@ CC: Sun C++ 5.13 SunOS_i386 151846-10 2015/10/30</code></pre>
 <p>To build the JDK, you need a &quot;configuration&quot;, which consists of a directory where to store the build output, coupled with information about the platform, the specific build machine, and choices that affect how the JDK is built.</p>
 <p>The configuration is created by the <code>configure</code> script. The basic invocation of the <code>configure</code> script looks like this:</p>
 <pre><code>bash configure [options]</code></pre>
-<p>This will create an output directory containing the configuration and setup an area for the build result. This directory typically looks like <code>build/linux-x64-normal-server-release</code>, but the actual name depends on your specific configuration. (It can also be set directly, see <a href="#using-multiple-configurations">Using Multiple Configurations</a>). This directory is referred to as <code>$BUILD</code> in this documentation.</p>
+<p>This will create an output directory containing the configuration and setup an area for the build result. This directory typically looks like <code>build/linux-x64-server-release</code>, but the actual name depends on your specific configuration. (It can also be set directly, see <a href="#using-multiple-configurations">Using Multiple Configurations</a>). This directory is referred to as <code>$BUILD</code> in this documentation.</p>
 <p><code>configure</code> will try to figure out what system you are running on and where all necessary build components are. If you have all prerequisites for building installed, it should find everything. If it fails to detect any component automatically, it will exit and inform you about the problem.</p>
 <p>Some command line examples:</p>
 <ul>

doc/building.md

@@ -120,6 +120,8 @@ At a minimum, a machine with 4 cores is advisable, as well as 4 GB of RAM. (The
 more cores to use, the more memory you need.) At least 8 GB of free disk space
 is required.
 
+Note: The sparc port is deprecated.
+
 ### Building on aarch64
 
 At a minimum, a machine with 8 cores is advisable, as well as 8 GB of RAM.
@@ -258,6 +260,8 @@ needed if you want to have external debug symbols. Please make sure you are
 using at least version 2.21.1 of objcopy, or that you disable external debug
 symbols.
 
+Note: The Solaris port is deprecated.
+
 ### macOS
 
 Apple is using a quite aggressive scheme of pushing OS updates, and coupling
@@ -323,10 +327,10 @@ issues.
 
  Operating system   Toolchain version
  ------------------ -------------------------------------------------------
- Linux              gcc 8.2.0
+ Linux              gcc 8.3.0
  macOS              Apple Xcode 10.1 (using clang 10.0.0)
  Solaris            Oracle Solaris Studio 12.6 (with compiler version 5.15)
- Windows            Microsoft Visual Studio 2017 update 15.9.6
+ Windows            Microsoft Visual Studio 2017 update 15.9.16
 
 All compilers are expected to be able to compile to the C99 language standard,
 as some C99 features are used in the source code. Microsoft Visual Studio
@@ -338,7 +342,7 @@ features that it does support.
 The minimum accepted version of gcc is 4.8. Older versions will generate a warning
 by `configure` and are unlikely to work.
 
-The JDK is currently known to be able to compile with at least version 7.4 of
+The JDK is currently known to be able to compile with at least version 8.3 of
 gcc.
 
 In general, any version between these two should be usable.
@@ -473,8 +477,8 @@ If a required library is not detected by `configure`, you need to provide the
 path to it. There are two forms of the `configure` arguments to point to an
 external library: `--with-<LIB>=<path>` or `--with-<LIB>-include=<path to
 include> --with-<LIB>-lib=<path to lib>`. The first variant is more concise,
-but require the include files an library files to reside in a default hierarchy
-under this directory. In most cases, it works fine.
+but require the include files and library files to reside in a default
+hierarchy under this directory. In most cases, it works fine.
 
 As a fallback, the second version allows you to point to the include directory
 and the lib directory separately.
@@ -484,7 +488,7 @@ and the lib directory separately.
 FreeType2 from [The FreeType Project](http://www.freetype.org/) is not required
 on any platform. The exception is on Unix-based platforms when configuring such
 that the build artifacts will reference a system installed library,
-rather than bundling the JDK’s own copy.
+rather than bundling the JDK's own copy.
 
   * To install on an apt-based Linux, try running `sudo apt-get install
     libfreetype6-dev`.
@@ -623,8 +627,8 @@ bash configure [options]
 
 This will create an output directory containing the configuration and setup an
 area for the build result. This directory typically looks like
-`build/linux-x64-normal-server-release`, but the actual name depends on your
-specific configuration. (It can also be set directly, see [Using Multiple
+`build/linux-x64-server-release`, but the actual name depends on your specific
+configuration. (It can also be set directly, see [Using Multiple
 Configurations](#using-multiple-configurations)). This directory is referred to
 as `$BUILD` in this documentation.
 

doc/testing.html

@@ -5,7 +5,7 @@
   <meta name="generator" content="pandoc" />
   <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
   <title>Testing the JDK</title>
-  <style type="text/css">
+  <style>
       code{white-space: pre-wrap;}
       span.smallcaps{font-variant: small-caps;}
       span.underline{text-decoration: underline;}
@@ -21,9 +21,9 @@
 <header id="title-block-header">
 <h1 class="title">Testing the JDK</h1>
 </header>
-<nav id="TOC">
+<nav id="TOC" role="doc-toc">
 <ul>
-<li><a href="#using-make-test-the-run-test-framework">Using &quot;make test&quot; (the run-test framework)</a><ul>
+<li><a href="#using-make-test-the-run-test-framework">Using "make test" (the run-test framework)</a><ul>
 <li><a href="#configuration">Configuration</a></li>
 </ul></li>
 <li><a href="#test-selection">Test selection</a><ul>
@@ -42,10 +42,12 @@
 <li><a href="#notes-for-specific-tests">Notes for Specific Tests</a><ul>
 <li><a href="#docker-tests">Docker Tests</a></li>
 <li><a href="#non-us-locale">Non-US locale</a></li>
+<li><a href="#pkcs11-tests">PKCS11 Tests</a></li>
+<li><a href="#client-ui-tests">Client UI Tests</a></li>
 </ul></li>
 </ul>
 </nav>
-<h2 id="using-make-test-the-run-test-framework">Using &quot;make test&quot; (the run-test framework)</h2>
+<h2 id="using-make-test-the-run-test-framework">Using "make test" (the run-test framework)</h2>
 <p>This new way of running tests is developer-centric. It assumes that you have built a JDK locally and want to test it. Running common test targets is simple, and more complex ad-hoc combination of tests is possible. The user interface is forgiving, and clearly report errors it cannot resolve.</p>
 <p>The main target <code>test</code> uses the jdk-image as the tested product. There is also an alternate target <code>exploded-test</code> that uses the exploded image instead. Not all tests will run successfully on the exploded image, but using this target can greatly improve rebuild times for certain workflows.</p>
 <p>Previously, <code>make test</code> was used to invoke an old system for running tests, and <code>make run-test</code> was used for the new test framework. For backward compatibility with scripts and muscle memory, <code>run-test</code> (and variants like <code>exploded-run-test</code> or <code>run-test-tier1</code>) are kept as aliases.</p>
@@ -63,7 +65,7 @@ $ make exploded-test TEST=tier2</code></pre>
 <p>To be able to run microbenchmarks, <code>configure</code> needs to know where to find the JMH dependency. Use <code>--with-jmh=&lt;path to JMH jars&gt;</code> to point to a directory containing the core JMH and transitive dependencies. The recommended dependencies can be retrieved by running <code>sh make/devkit/createJMHBundle.sh</code>, after which <code>--with-jmh=build/jmh/jars</code> should work.</p>
 <h2 id="test-selection">Test selection</h2>
 <p>All functionality is available using the <code>test</code> make target. In this use case, the test or tests to be executed is controlled using the <code>TEST</code> variable. To speed up subsequent test runs with no source code changes, <code>test-only</code> can be used instead, which do not depend on the source and test image build.</p>
-<p>For some common top-level tests, direct make targets have been generated. This includes all JTReg test groups, the hotspot gtest, and custom tests (if present). This means that <code>make test-tier1</code> is equivalent to <code>make test TEST=&quot;tier1&quot;</code>, but the latter is more tab-completion friendly. For more complex test runs, the <code>test TEST=&quot;x&quot;</code> solution needs to be used.</p>
+<p>For some common top-level tests, direct make targets have been generated. This includes all JTReg test groups, the hotspot gtest, and custom tests (if present). This means that <code>make test-tier1</code> is equivalent to <code>make test TEST="tier1"</code>, but the latter is more tab-completion friendly. For more complex test runs, the <code>test TEST="x"</code> solution needs to be used.</p>
 <p>The test specifications given in <code>TEST</code> is parsed into fully qualified test descriptors, which clearly and unambigously show which tests will be run. As an example, <code>:tier1</code> will expand to <code>jtreg:$(TOPDIR)/test/hotspot/jtreg:tier1 jtreg:$(TOPDIR)/test/jdk:tier1 jtreg:$(TOPDIR)/test/langtools:tier1 jtreg:$(TOPDIR)/test/nashorn:tier1 jtreg:$(TOPDIR)/test/jaxp:tier1</code>. You can always submit a list of fully qualified test descriptors in the <code>TEST</code> variable if you want to shortcut the parser.</p>
 <h3 id="jtreg">JTReg</h3>
 <p>JTReg tests can be selected either by picking a JTReg test group, or a selection of files or directories containing JTReg tests.</p>
@@ -103,8 +105,8 @@ TEST FAILURE</code></pre>
 <p>Additional work data is stored in <code>build/$BUILD/test-support/$TEST_ID</code>. For some frameworks, this directory might contain information that is useful in determining the cause of a failed test.</p>
 <h2 id="test-suite-control">Test suite control</h2>
 <p>It is possible to control various aspects of the test suites using make control variables.</p>
-<p>These variables use a keyword=value approach to allow multiple values to be set. So, for instance, <code>JTREG=&quot;JOBS=1;TIMEOUT_FACTOR=8&quot;</code> will set the JTReg concurrency level to 1 and the timeout factor to 8. This is equivalent to setting <code>JTREG_JOBS=1 JTREG_TIMEOUT_FACTOR=8</code>, but using the keyword format means that the <code>JTREG</code> variable is parsed and verified for correctness, so <code>JTREG=&quot;TMIEOUT_FACTOR=8&quot;</code> would give an error, while <code>JTREG_TMIEOUT_FACTOR=8</code> would just pass unnoticed.</p>
-<p>To separate multiple keyword=value pairs, use <code>;</code> (semicolon). Since the shell normally eats <code>;</code>, the recommended usage is to write the assignment inside qoutes, e.g. <code>JTREG=&quot;...;...&quot;</code>. This will also make sure spaces are preserved, as in <code>JTREG=&quot;VM_OPTIONS=-XshowSettings -Xlog:gc+ref=debug&quot;</code>.</p>
+<p>These variables use a keyword=value approach to allow multiple values to be set. So, for instance, <code>JTREG="JOBS=1;TIMEOUT_FACTOR=8"</code> will set the JTReg concurrency level to 1 and the timeout factor to 8. This is equivalent to setting <code>JTREG_JOBS=1 JTREG_TIMEOUT_FACTOR=8</code>, but using the keyword format means that the <code>JTREG</code> variable is parsed and verified for correctness, so <code>JTREG="TMIEOUT_FACTOR=8"</code> would give an error, while <code>JTREG_TMIEOUT_FACTOR=8</code> would just pass unnoticed.</p>
+<p>To separate multiple keyword=value pairs, use <code>;</code> (semicolon). Since the shell normally eats <code>;</code>, the recommended usage is to write the assignment inside qoutes, e.g. <code>JTREG="...;..."</code>. This will also make sure spaces are preserved, as in <code>JTREG="VM_OPTIONS=-XshowSettings -Xlog:gc+ref=debug"</code>.</p>
 <p>(Other ways are possible, e.g. using backslash: <code>JTREG=JOBS=1\;TIMEOUT_FACTOR=8</code>. Also, as a special technique, the string <code>%20</code> will be replaced with space for certain options, e.g. <code>JTREG=VM_OPTIONS=-XshowSettings%20-Xlog:gc+ref=debug</code>. This can be useful if you have layers of scripts and have trouble getting proper quoting of command line arguments through.)</p>
 <p>As far as possible, the names of the keywords have been standardized between test suites.</p>
 <h3 id="general-keywords-test_opts">General keywords (TEST_OPTS)</h3>
@@ -159,20 +161,22 @@ TEST FAILURE</code></pre>
 <p>Set to <code>true</code> or <code>false</code>. If <code>true</code>, JTReg will use <code>-match:</code> option, otherwise <code>-exclude:</code> will be used. Default is <code>false</code>.</p>
 <h4 id="options">OPTIONS</h4>
 <p>Additional options to the JTReg test framework.</p>
-<p>Use <code>JTREG=&quot;OPTIONS=--help all&quot;</code> to see all available JTReg options.</p>
+<p>Use <code>JTREG="OPTIONS=--help all"</code> to see all available JTReg options.</p>
 <h4 id="java_options-1">JAVA_OPTIONS</h4>
 <p>Additional Java options to JTReg (<code>-javaoption</code>).</p>
 <h4 id="vm_options-1">VM_OPTIONS</h4>
 <p>Additional VM options to JTReg (<code>-vmoption</code>).</p>
 <h4 id="aot_modules-1">AOT_MODULES</h4>
 <p>Generate AOT modules before testing for the specified module, or set of modules. If multiple modules are specified, they should be separated by space (or, to help avoid quoting issues, the special value <code>%20</code>).</p>
+<h4 id="retry_count">RETRY_COUNT</h4>
+<p>Retry failed tests up to a set number of times. Defaults to 0.</p>
 <h3 id="gtest-keywords">Gtest keywords</h3>
 <h4 id="repeat">REPEAT</h4>
 <p>The number of times to repeat the tests (<code>--gtest_repeat</code>).</p>
 <p>Default is 1. Set to -1 to repeat indefinitely. This can be especially useful combined with <code>OPTIONS=--gtest_break_on_failure</code> to reproduce an intermittent problem.</p>
 <h4 id="options-1">OPTIONS</h4>
 <p>Additional options to the Gtest test framework.</p>
-<p>Use <code>GTEST=&quot;OPTIONS=--help&quot;</code> to see all available Gtest options.</p>
+<p>Use <code>GTEST="OPTIONS=--help"</code> to see all available Gtest options.</p>
 <h4 id="aot_modules-2">AOT_MODULES</h4>
 <p>Generate AOT modules before testing for the specified module, or set of modules. If multiple modules are specified, they should be separated by space (or, to help avoid quoting issues, the special value <code>%20</code>).</p>
 <h3 id="microbenchmark-keywords">Microbenchmark keywords</h3>
@@ -199,8 +203,22 @@ TEST FAILURE</code></pre>
 <p>To run these tests correctly, additional parameters for the correct docker image are required on Ubuntu 18.04 by using <code>JAVA_OPTIONS</code>.</p>
 <pre><code>$ make test TEST=&quot;jtreg:test/hotspot/jtreg/containers/docker&quot; JTREG=&quot;JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu -Djdk.test.docker.image.version=latest&quot;</code></pre>
 <h3 id="non-us-locale">Non-US locale</h3>
-<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG=&quot;en_US&quot;</code> in the environment before running tests should work. On Windows, setting <code>JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot;</code> helps for most, but not all test cases. For example:</p>
+<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG="en_US"</code> in the environment before running tests should work. On Windows, setting <code>JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US"</code> helps for most, but not all test cases. For example:</p>
 <pre><code>$ export LANG=&quot;en_US&quot; &amp;&amp; make test TEST=...
 $ make test JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot; TEST=...</code></pre>
+<h3 id="pkcs11-tests">PKCS11 Tests</h3>
+<p>It is highly recommended to use the latest NSS version when running PKCS11 tests. Improper NSS version may lead to unexpected failures which are hard to diagnose. For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail on Ubuntu 18.04 with the default NSS version in the system. To run these tests correctly, the system property <code>test.nss.lib.paths</code> is required on Ubuntu 18.04 to specify the alternative NSS lib directories. For example:</p>
+<pre><code>$ make test TEST=&quot;jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java&quot; JTREG=&quot;JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs&quot;</code></pre>
+<p>For more notes about the PKCS11 tests, please refer to test/jdk/sun/security/pkcs11/README.</p>
+<h3 id="client-ui-tests">Client UI Tests</h3>
+<p>Some Client UI tests use key sequences which may be reserved by the operating system. Usually that causes the test failure. So it is highly recommended to disable system key shortcuts prior testing. The steps to access and disable system key shortcuts for various platforms are provided below.</p>
+<h4 id="macos">MacOS</h4>
+<p>Choose Apple menu; System Preferences, click Keyboard, then click Shortcuts; select or deselect desired shortcut.</p>
+<p>For example, test/jdk/javax/swing/TooltipManager/JMenuItemToolTipKeyBindingsTest/JMenuItemToolTipKeyBindingsTest.java fails on MacOS because it uses <code>CTRL + F1</code> key sequence to show or hide tooltip message but the key combination is reserved by the operating system. To run the test correctly the default global key shortcut should be disabled using the steps described above, and then deselect "Turn keyboard access on or off" option which is responsible for <code>CTRL + F1</code> combination.</p>
+<h4 id="linux">Linux</h4>
+<p>Open the Activities overview and start typing Settings; Choose Settings, click Devices, then click Keyboard; set or override desired shortcut.</p>
+<h4 id="windows">Windows</h4>
+<p>Type <code>gpedit</code> in the Search and then click Edit group policy; navigate to User Configuration -&gt; Administrative Templates -&gt; Windows Components -&gt; File Explorer; in the right-side pane look for "Turn off Windows key hotkeys" and double click on it; enable or disable hotkeys.</p>
+<p>Note: restart is required to make the settings take effect.</p>
 </body>
 </html>

doc/testing.md

@@ -332,6 +332,10 @@ Generate AOT modules before testing for the specified module, or set of
 modules. If multiple modules are specified, they should be separated by space
 (or, to help avoid quoting issues, the special value `%20`).
 
+#### RETRY_COUNT
+
+Retry failed tests up to a set number of times. Defaults to 0.
+
 ### Gtest keywords
 
 #### REPEAT
@@ -407,6 +411,49 @@ For example:
     $ export LANG="en_US" && make test TEST=...
     $ make test JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US" TEST=...
 
+### PKCS11 Tests
+
+It is highly recommended to use the latest NSS version when running PKCS11 tests.
+Improper NSS version may lead to unexpected failures which are hard to diagnose.
+For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail on Ubuntu
+18.04 with the default NSS version in the system.
+To run these tests correctly, the system property `test.nss.lib.paths` is required
+on Ubuntu 18.04 to specify the alternative NSS lib directories.
+For example:
+
+    $ make test TEST="jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java" JTREG="JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs"
+
+For more notes about the PKCS11 tests, please refer to test/jdk/sun/security/pkcs11/README.
+
+### Client UI Tests
+
+Some Client UI tests use key sequences which may be reserved by the operating
+system. Usually that causes the test failure. So it is highly recommended to disable
+system key shortcuts prior testing. The steps to access and disable system key shortcuts
+for various platforms are provided below.
+
+#### MacOS
+Choose Apple menu; System Preferences, click Keyboard, then click Shortcuts;
+select or deselect desired shortcut.
+
+For example, test/jdk/javax/swing/TooltipManager/JMenuItemToolTipKeyBindingsTest/JMenuItemToolTipKeyBindingsTest.java fails
+on MacOS because it uses `CTRL + F1` key sequence to show or hide tooltip message
+but the key combination is reserved by the operating system. To run the test correctly
+the default global key shortcut should be disabled using the steps described above, and then deselect
+"Turn keyboard access on or off" option which is responsible for `CTRL + F1` combination.
+
+#### Linux
+Open the Activities overview and start typing Settings; Choose Settings, click Devices,
+then click Keyboard; set or override desired shortcut.
+
+#### Windows
+Type `gpedit` in the Search and then click Edit group policy; navigate to
+User Configuration -> Administrative Templates -> Windows Components -> File Explorer;
+in the right-side pane look for "Turn off Windows key hotkeys" and double click on it;
+enable or disable hotkeys.
+
+Note: restart is required to make the settings take effect.
+
 ---
 # Override some definitions in the global css file that are not optimal for
 # this document.

make/Bundles.gmk

@@ -50,6 +50,7 @@ $(eval $(call IncludeCustomExtension, Bundles-pre.gmk))
 #     files or directories may contain spaces.
 # BASE_DIRS : Base directories for the root dir in the bundle.
 # SUBDIR : Optional name of root dir in bundle.
+# OUTPUTDIR : Optionally override output dir
 SetupBundleFile = $(NamedParamsMacroTemplate)
 define SetupBundleFileBody
 
@@ -70,8 +71,11 @@ define SetupBundleFileBody
 
   $$(call SetIfEmpty, $1_UNZIP_DEBUGINFO, false)
 
-  $(BUNDLES_OUTPUTDIR)/$$($1_BUNDLE_NAME): $$($1_FILES)
+  $$(call SetIfEmpty, $1_OUTPUTDIR, $$(BUNDLES_OUTPUTDIR))
+
+  $$($1_OUTPUTDIR)/$$($1_BUNDLE_NAME): $$($1_FILES)
 	$$(call MakeTargetDir)
+	$$(call LogWarn, Creating $$($1_BUNDLE_NAME))
         # If any of the files contain a space in the file name, FindFiles
         # will have replaced it with ?. Tar does not accept that so need to
         # switch it back.
@@ -137,7 +141,7 @@ define SetupBundleFileBody
           endif
         endif
 
-  $1 += $(BUNDLES_OUTPUTDIR)/$$($1_BUNDLE_NAME)
+  $1 += $$($1_OUTPUTDIR)/$$($1_BUNDLE_NAME)
 
 endef
 
@@ -152,6 +156,12 @@ ifeq ($(call isTargetOs, macosx)+$(DEBUG_LEVEL), true+release)
   JRE_IMAGE_HOMEDIR := $(JRE_MACOSX_CONTENTS_DIR)/Home
   JDK_BUNDLE_SUBDIR :=
   JRE_BUNDLE_SUBDIR :=
+  # In certain situations, the JDK_IMAGE_DIR points to an image without the
+  # the symbols and demos. If so, the symobls and demos can be found in a
+  # separate image. These variables allow for overriding from a custom makefile.
+  JDK_SYMBOLS_IMAGE_DIR ?= $(JDK_IMAGE_DIR)
+  JDK_DEMOS_IMAGE_DIR ?= $(JDK_IMAGE_DIR)
+  JDK_DEMOS_IMAGE_HOMEDIR ?= $(JDK_DEMOS_IMAGE_DIR)/$(JDK_MACOSX_CONTENTS_SUBDIR)/Home
 else
   JDK_IMAGE_HOMEDIR := $(JDK_IMAGE_DIR)
   JRE_IMAGE_HOMEDIR := $(JRE_IMAGE_DIR)
@@ -161,24 +171,41 @@ else
     JDK_BUNDLE_SUBDIR := $(JDK_BUNDLE_SUBDIR)/$(DEBUG_LEVEL)
     JRE_BUNDLE_SUBDIR := $(JRE_BUNDLE_SUBDIR)/$(DEBUG_LEVEL)
   endif
+  # In certain situations, the JDK_IMAGE_DIR points to an image without the
+  # the symbols and demos. If so, the symobls and demos can be found in a
+  # separate image. These variables allow for overriding from a custom makefile.
+  JDK_SYMBOLS_IMAGE_DIR ?= $(JDK_IMAGE_DIR)
+  JDK_DEMOS_IMAGE_DIR ?= $(JDK_IMAGE_DIR)
+  JDK_DEMOS_IMAGE_HOMEDIR ?= $(JDK_DEMOS_IMAGE_DIR)
 endif
 
 ################################################################################
 
-ifneq ($(filter product-bundles legacy-bundles, $(MAKECMDGOALS)), )
+ifneq ($(filter product-bundles% legacy-bundles, $(MAKECMDGOALS)), )
 
   SYMBOLS_EXCLUDE_PATTERN := %.debuginfo %.diz %.pdb %.map
 
   # There may be files with spaces in the names, so use ShellFindFiles
   # explicitly.
   ALL_JDK_FILES := $(call ShellFindFiles, $(JDK_IMAGE_DIR))
+  ifneq ($(JDK_IMAGE_DIR), $(JDK_SYMBOLS_IMAGE_DIR))
+    ALL_JDK_SYMBOLS_FILES := $(call ShellFindFiles, $(JDK_SYMBOLS_IMAGE_DIR))
+  else
+    ALL_JDK_SYMBOLS_FILES := $(ALL_JDK_FILES)
+  endif
+  ifneq ($(JDK_IMAGE_DIR), $(JDK_DEMOS_IMAGE_DIR))
+    ALL_JDK_DEMOS_FILES := $(call ShellFindFiles, $(JDK_DEMOS_IMAGE_DIR))
+  else
+    ALL_JDK_DEMOS_FILES := $(ALL_JDK_FILES)
+  endif
 
   # Create special filter rules when dealing with unzipped .dSYM directories on
   # macosx
   ifeq ($(call isTargetOs, macosx), true)
     ifeq ($(ZIP_EXTERNAL_DEBUG_SYMBOLS), false)
       JDK_SYMBOLS_EXCLUDE_PATTERN := $(addprefix %, \
-          $(call containing, .dSYM/, $(patsubst $(JDK_IMAGE_DIR)/%, %, $(ALL_JDK_FILES))))
+          $(call containing, .dSYM/, $(patsubst $(JDK_IMAGE_DIR)/%, %, \
+          $(ALL_JDK_SYMBOLS_FILES))))
     endif
   endif
 
@@ -199,12 +226,13 @@ ifneq ($(filter product-bundles legacy-bundles, $(MAKECMDGOALS)), )
           $(filter-out \
               $(JDK_IMAGE_HOMEDIR)/demo/% \
               , \
-              $(ALL_JDK_FILES) \
+              $(ALL_JDK_SYMBOLS_FILES) \
           ) \
       ) \
       $(call FindFiles, $(SYMBOLS_IMAGE_DIR))
 
-  TEST_DEMOS_BUNDLE_FILES := $(filter $(JDK_IMAGE_HOMEDIR)/demo/%, $(ALL_JDK_FILES))
+  TEST_DEMOS_BUNDLE_FILES := $(filter $(JDK_DEMOS_IMAGE_HOMEDIR)/demo/%, \
+      $(ALL_JDK_DEMOS_FILES))
 
   ALL_JRE_FILES := $(call ShellFindFiles, $(JRE_IMAGE_DIR))
 
@@ -241,15 +269,17 @@ ifneq ($(filter product-bundles legacy-bundles, $(MAKECMDGOALS)), )
 
   LEGACY_TARGETS += $(BUILD_JRE_BUNDLE)
 
-  $(eval $(call SetupBundleFile, BUILD_JDK_SYMBOLS_BUNDLE, \
-      BUNDLE_NAME := $(JDK_SYMBOLS_BUNDLE_NAME), \
-      FILES := $(JDK_SYMBOLS_BUNDLE_FILES), \
-      BASE_DIRS := $(JDK_IMAGE_DIR) $(wildcard $(SYMBOLS_IMAGE_DIR)), \
-      SUBDIR := $(JDK_BUNDLE_SUBDIR), \
-      UNZIP_DEBUGINFO := true, \
-  ))
+  ifeq ($(COPY_DEBUG_SYMBOLS), true)
+    $(eval $(call SetupBundleFile, BUILD_JDK_SYMBOLS_BUNDLE, \
+        BUNDLE_NAME := $(JDK_SYMBOLS_BUNDLE_NAME), \
+        FILES := $(JDK_SYMBOLS_BUNDLE_FILES), \
+        BASE_DIRS := $(JDK_SYMBOLS_IMAGE_DIR) $(wildcard $(SYMBOLS_IMAGE_DIR)), \
+        SUBDIR := $(JDK_BUNDLE_SUBDIR), \
+        UNZIP_DEBUGINFO := true, \
+    ))
 
-  PRODUCT_TARGETS += $(BUILD_JDK_SYMBOLS_BUNDLE)
+    PRODUCT_TARGETS += $(BUILD_JDK_SYMBOLS_BUNDLE)
+  endif
 
   # The demo bundle is only created to support client tests. Ideally it should
   # be built with the main test bundle, but since the prerequisites match
@@ -257,7 +287,7 @@ ifneq ($(filter product-bundles legacy-bundles, $(MAKECMDGOALS)), )
   $(eval $(call SetupBundleFile, BUILD_TEST_DEMOS_BUNDLE, \
       BUNDLE_NAME := $(TEST_DEMOS_BUNDLE_NAME), \
       FILES := $(TEST_DEMOS_BUNDLE_FILES), \
-      BASE_DIRS := $(JDK_IMAGE_DIR), \
+      BASE_DIRS := $(JDK_DEMOS_IMAGE_DIR), \
       SUBDIR := $(JDK_BUNDLE_SUBDIR), \
   ))
 
@@ -310,6 +340,27 @@ endif
 
 ################################################################################
 
+ifneq ($(filter static-libs-bundles, $(MAKECMDGOALS)), )
+  STATIC_LIBS_BUNDLE_FILES := $(call FindFiles, $(STATIC_LIBS_IMAGE_DIR))
+
+  ifeq ($(OPENJDK_TARGET_OS)-$(DEBUG_LEVEL), macosx-release)
+    STATIC_LIBS_BUNDLE_SUBDIR := $(JDK_MACOSX_CONTENTS_SUBDIR)/Home
+  else
+    STATIC_LIBS_BUNDLE_SUBDIR := $(JDK_BUNDLE_SUBDIR)
+  endif
+
+  $(eval $(call SetupBundleFile, BUILD_STATIC_LIBS_BUNDLE, \
+      BUNDLE_NAME := $(STATIC_LIBS_BUNDLE_NAME), \
+      FILES := $(STATIC_LIBS_BUNDLE_FILES), \
+      BASE_DIRS := $(STATIC_LIBS_IMAGE_DIR), \
+      SUBDIR := $(STATIC_LIBS_BUNDLE_SUBDIR), \
+  ))
+
+  STATIC_LIBS_TARGETS += $(BUILD_STATIC_LIBS_BUNDLE)
+endif
+
+################################################################################
+
 # Hook to include the corresponding custom file, if present.
 $(eval $(call IncludeCustomExtension, Bundles.gmk))
 
@@ -319,6 +370,8 @@ product-bundles: $(PRODUCT_TARGETS)
 legacy-bundles: $(LEGACY_TARGETS)
 test-bundles: $(TEST_TARGETS)
 docs-bundles: $(DOCS_TARGETS)
+static-libs-bundles: $(STATIC_LIBS_TARGETS)
 jcov-bundles: $(JCOV_TARGETS)
 
-.PHONY: all default product-bundles test-bundles docs-bundles jcov-bundles
+.PHONY: all default product-bundles test-bundles docs-bundles \
+    static-libs-bundles jcov-bundles

make/CompileInterimLangtools.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -49,6 +49,13 @@ $(BUILDTOOLS_OUTPUTDIR)/gensrc/%.interim/module-info.java: \
 TARGETS += $(patsubst %, $(BUILDTOOLS_OUTPUTDIR)/gensrc/%/module-info.java, \
     $(INTERIM_LANGTOOLS_MODULES))
 
+$(eval $(call SetupCopyFiles, COPY_PREVIEW_FEATURES, \
+    FILES := $(TOPDIR)/src/java.base/share/classes/jdk/internal/PreviewFeature.java, \
+    DEST := $(BUILDTOOLS_OUTPUTDIR)/gensrc/java.base.interim/jdk/internal/, \
+))
+
+TARGETS += $(COPY_PREVIEW_FEATURES)
+
 ################################################################################
 # Setup the rules to build interim langtools, which is compiled by the boot
 # javac and can be run on the boot jdk. This will be used to compile the rest of
@@ -72,13 +79,16 @@ define SetupInterimModule
       BIN := $(BUILDTOOLS_OUTPUTDIR)/interim_langtools_modules/$1.interim, \
       ADD_JAVAC_FLAGS := --module-path $(BUILDTOOLS_OUTPUTDIR)/interim_langtools_modules \
           $$(INTERIM_LANGTOOLS_ADD_EXPORTS) \
+          --patch-module java.base=$(BUILDTOOLS_OUTPUTDIR)/gensrc/java.base.interim \
+          --add-exports java.base/jdk.internal=java.compiler.interim \
+          --add-exports java.base/jdk.internal=jdk.compiler.interim \
           -Xlint:-module, \
   ))
 
   $1_DEPS_INTERIM := $$(addsuffix .interim, $$(filter \
       $$(INTERIM_LANGTOOLS_BASE_MODULES), $$(call FindTransitiveDepsForModule, $1)))
 
-  $$(BUILD_$1.interim): $$(foreach d, $$($1_DEPS_INTERIM), $$(BUILD_$$d))
+  $$(BUILD_$1.interim): $$(foreach d, $$($1_DEPS_INTERIM), $$(BUILD_$$d)) $(COPY_PREVIEW_FEATURES)
 
   TARGETS += $$(BUILD_$1.interim)
 endef

make/CompileJavaModules.gmk

@@ -380,6 +380,13 @@ endif
 
 ################################################################################
 
+jdk.incubator.jpackage_COPY += .gif .png .txt .spec .script .prerm .preinst .postrm .postinst .list .sh \
+    .desktop .copyright .control .plist .template .icns .scpt .entitlements .wxs .wxl .wxi .ico .bmp .tiff
+
+jdk.incubator.jpackage_CLEAN += .properties
+
+################################################################################
+
 jdk.jconsole_COPY += .gif .png
 
 jdk.jconsole_CLEAN_FILES += $(wildcard \

make/CompileToolsJdk.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/Coverage.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2018, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/CreateJmods.gmk

@@ -86,16 +86,18 @@ endif
 # from there. These files were explicitly filtered or modified in <module>-copy
 # targets. For the rest, just pick up everything from the source legal dirs.
 LEGAL_NOTICES := \
-    $(SUPPORT_OUTPUTDIR)/modules_legal/common \
+    $(wildcard $(SUPPORT_OUTPUTDIR)/modules_legal/common) \
     $(if $(wildcard $(SUPPORT_OUTPUTDIR)/modules_legal/$(MODULE)), \
       $(wildcard $(SUPPORT_OUTPUTDIR)/modules_legal/$(MODULE)), \
       $(call FindModuleLegalSrcDirs, $(MODULE)) \
     )
 
-LEGAL_NOTICES_PATH := $(call PathList, $(LEGAL_NOTICES))
-DEPS += $(call FindFiles, $(LEGAL_NOTICES))
+ifneq ($(strip $(LEGAL_NOTICES)), )
+  LEGAL_NOTICES_PATH := $(call PathList, $(LEGAL_NOTICES))
+  DEPS += $(call FindFiles, $(LEGAL_NOTICES))
 
-JMOD_FLAGS += --legal-notices $(LEGAL_NOTICES_PATH)
+  JMOD_FLAGS += --legal-notices $(LEGAL_NOTICES_PATH)
+endif
 
 ifeq ($(filter-out jdk.incubator.%, $(MODULE)), )
   JMOD_FLAGS += --do-not-resolve-by-default

make/Docs.gmk

@@ -95,6 +95,7 @@ JAVADOC_TAGS := \
     -tag see \
     -taglet build.tools.taglet.ExtLink \
     -taglet build.tools.taglet.Incubating \
+    -taglet build.tools.taglet.Preview \
     -tagletpath $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
     $(CUSTOM_JAVADOC_TAGS) \
     #
@@ -137,9 +138,9 @@ JAVA_PLATFORM := Java Platform
 ifeq ($(IS_DRAFT), true)
   DRAFT_MARKER_STR := <br><strong>DRAFT $(VERSION_STRING)</strong>
   ifeq ($(VERSION_BUILD), 0)
-    DRAFT_MARKER_TITLE := [ad-hoc build]
+    DRAFT_MARKER_TITLE := $(SPACE)[ad-hoc build]
   else
-    DRAFT_MARKER_TITLE := [build $(VERSION_BUILD)]
+    DRAFT_MARKER_TITLE := $(SPACE)[build $(VERSION_BUILD)]
   endif
   DRAFT_TEXT := This specification is not final and is subject to change. \
       Use is subject to <a href="$(LICENSE_URL)">license terms</a>.
@@ -191,26 +192,26 @@ JAVASE_LONG_NAME := Java<sup>&reg;</sup> Platform, Standard Edition
 ################################################################################
 # Functions
 
-# Helper function for creating a png file from a dot file generated by the
+# Helper function for creating a svg file from a dot file generated by the
 # GenGraphs tool.
 # param 1: SetupJavadocGeneration namespace ($1)
 # param 2: module name
 #
-define setup_gengraph_dot_to_png
+define setup_gengraph_dot_to_svg
   $1_$2_DOT_SRC :=  $$($1_GENGRAPHS_DIR)/$2.dot
-  $1_$2_PNG_TARGET := $$($1_TARGET_DIR)/$2/module-graph.png
+  $1_$2_SVG_TARGET := $$($1_TARGET_DIR)/$2/module-graph.svg
 
-    # For each module needing a graph, create a png file from the dot file
+    # For each module needing a graph, create a svg file from the dot file
     # generated by the GenGraphs tool and store it in the target dir.
-    $$(eval $$(call SetupExecute, gengraphs_png_$1_$2, \
+    $$(eval $$(call SetupExecute, gengraphs_svg_$1_$2, \
         INFO := Running dot for module graphs for $2, \
         DEPS := $$(gengraphs_$1_TARGET), \
-        OUTPUT_FILE := $$($1_$2_PNG_TARGET), \
+        OUTPUT_FILE := $$($1_$2_SVG_TARGET), \
         SUPPORT_DIR := $$($1_GENGRAPHS_DIR), \
-        COMMAND := $$(DOT) -Tpng -o $$($1_$2_PNG_TARGET) $$($1_$2_DOT_SRC), \
+        COMMAND := $$(DOT) -Tsvg -o $$($1_$2_SVG_TARGET) $$($1_$2_DOT_SRC), \
     ))
 
-  $1_MODULEGRAPH_TARGETS += $$($1_$2_PNG_TARGET)
+  $1_MODULEGRAPH_TARGETS += $$($1_$2_SVG_TARGET)
 endef
 
 # Helper function to create the overview.html file to use with the -overview
@@ -281,7 +282,7 @@ define SetupApiDocsGenerationBody
 
   ifeq ($$(ENABLE_FULL_DOCS), true)
     # Tell the ModuleGraph taglet to generate html links to soon-to-be-created
-    # png files with module graphs.
+    # svg files with module graphs.
     $1_JAVA_ARGS += -DenableModuleGraph=true
   endif
 
@@ -303,7 +304,7 @@ define SetupApiDocsGenerationBody
 
   $1_DOC_TITLE := $$($1_LONG_NAME)<br>Version $$(VERSION_SPECIFICATION) API \
       Specification
-  $1_WINDOW_TITLE := $$(subst &amp;,&,$$($1_SHORT_NAME)) $$(DRAFT_MARKER_TITLE)
+  $1_WINDOW_TITLE := $$(subst &amp;,&,$$($1_SHORT_NAME))$$(DRAFT_MARKER_TITLE)
   $1_HEADER_TITLE := <div $$(HEADER_STYLE)><strong>$$($1_SHORT_NAME)</strong> \
       $$(DRAFT_MARKER_STR)</div>
 
@@ -361,8 +362,8 @@ define SetupApiDocsGenerationBody
   $1_JAVADOC_TARGETS := $$(javadoc_$1_TARGET)
 
   ifeq ($$(ENABLE_FULL_DOCS), true)
-    # We have asked ModuleGraph to generate links to png files. Now we must
-    # produce the png files.
+    # We have asked ModuleGraph to generate links to svg files. Now we must
+    # produce the svg files.
 
     # Locate which modules has the @moduleGraph tag in their module-info.java
     $1_MODULES_NEEDING_GRAPH := $$(strip $$(foreach m, $$($1_ALL_MODULES), \
@@ -387,11 +388,11 @@ define SetupApiDocsGenerationBody
             --dot-attributes $$(GENGRAPHS_PROPS), \
     ))
 
-    # For each module needing a graph, create a png file from the dot file
+    # For each module needing a graph, create a svg file from the dot file
     # generated by the GenGraphs tool and store it in the target dir.
     # They will depend on gengraphs_$1_TARGET, and will be added to $1.
     $$(foreach m, $$($1_MODULES_NEEDING_GRAPH), \
-      $$(eval $$(call setup_gengraph_dot_to_png,$1,$$m)) \
+      $$(eval $$(call setup_gengraph_dot_to_svg,$1,$$m)) \
     )
   endif
 endef

make/GenerateLinkOptData.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2016, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2016, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/Help.gmk

@@ -43,7 +43,7 @@ help:
 	$(info $(_) make images            # Create a complete jdk image)
 	$(info $(_)                        # (alias for product-images))
 	$(info $(_) make <name>-image      # Build just the image for any of: )
-	$(info $(_)                        # jdk, test, docs, symbols, legacy-jre)
+	$(info $(_)                        # jdk, test, docs, symbols, legacy-jre, static-libs)
 	$(info $(_) make <phase>           # Build the specified phase and everything it depends on)
 	$(info $(_)                        # (gensrc, java, copy, libs, launchers, gendata, rmic))
 	$(info $(_) make *-only            # Applies to most targets and disables building the)

make/MacBundles.gmk

@@ -61,17 +61,15 @@ ifeq ($(call isTargetOs, macosx), true)
       FILES := $(call FindFiles, $(JRE_IMAGE_DIR)), \
   ))
 
-  $(JDK_MACOSX_CONTENTS_DIR)/MacOS/libjli.dylib:
-	$(call LogInfo, Creating link $(patsubst $(OUTPUTDIR)/%,%,$@))
-	$(call MakeTargetDir)
-	$(RM) $@
-	$(LN) -s ../Home/lib/libjli.dylib $@
+  $(eval $(call SetupCopyFiles, COPY_LIBJLI_JDK, \
+      FILES := $(JDK_IMAGE_DIR)/lib/libjli.dylib, \
+      DEST := $(JDK_MACOSX_CONTENTS_DIR)/MacOS, \
+  ))
 
-  $(JRE_MACOSX_CONTENTS_DIR)/MacOS/libjli.dylib:
-	$(call LogInfo, Creating link $(patsubst $(OUTPUTDIR)/%,%,$@))
-	$(call MakeTargetDir)
-	$(RM) $@
-	$(LN) -s ../Home/lib/libjli.dylib $@
+  $(eval $(call SetupCopyFiles, COPY_LIBJLI_JRE, \
+      FILES := $(JRE_IMAGE_DIR)/lib/libjli.dylib, \
+      DEST := $(JRE_MACOSX_CONTENTS_DIR)/MacOS, \
+  ))
 
   $(eval $(call SetupTextFileProcessing, BUILD_JDK_PLIST, \
       SOURCE_FILES := $(MACOSX_PLIST_SRC)/JDK-Info.plist, \
@@ -97,13 +95,19 @@ ifeq ($(call isTargetOs, macosx), true)
           @@VENDOR@@ => $(BUNDLE_VENDOR) , \
   ))
 
-  jdk-bundle: $(COPY_JDK_IMAGE) $(JDK_MACOSX_CONTENTS_DIR)/MacOS/libjli.dylib \
-      $(BUILD_JDK_PLIST)
+  $(SUPPORT_OUTPUTDIR)/images/_jdk_bundle_attribute_set: $(COPY_JDK_IMAGE)
 	$(SETFILE) -a B $(dir $(JDK_MACOSX_CONTENTS_DIR))
+	$(TOUCH) $@
 
-  jre-bundle: $(COPY_JRE_IMAGE) $(JRE_MACOSX_CONTENTS_DIR)/MacOS/libjli.dylib \
-      $(BUILD_JRE_PLIST)
+  $(SUPPORT_OUTPUTDIR)/images/_jre_bundle_attribute_set: $(COPY_JRE_IMAGE)
 	$(SETFILE) -a B $(dir $(JRE_MACOSX_CONTENTS_DIR))
+	$(TOUCH) $@
+
+  jdk-bundle: $(COPY_JDK_IMAGE) $(COPY_LIBJLI_JDK) \
+      $(BUILD_JDK_PLIST) $(SUPPORT_OUTPUTDIR)/images/_jdk_bundle_attribute_set
+
+  jre-bundle: $(COPY_JRE_IMAGE) $(COPY_LIBJLI_JRE) \
+      $(BUILD_JRE_PLIST) $(SUPPORT_OUTPUTDIR)/images/_jre_bundle_attribute_set
 
 else # Not macosx
 

make/Main.gmk

@@ -77,7 +77,7 @@ interim-rmic:
 
 interim-cldrconverter:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CopyInterimCLDRConverter.gmk)
- 
+
 interim-tzdb:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CopyInterimTZDB.gmk)
 
@@ -133,7 +133,7 @@ GENSRC_TARGETS += $(sort $(GENSRC_MODULEINFO_TARGETS) \
 define DeclareModuleInfoRecipe
   $1-gensrc-moduleinfo:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) \
-	    -f GensrcModuleInfo.gmk MODULE=$1)
+	    -f gensrc/GensrcModuleInfo.gmk MODULE=$1)
 
   $1-gensrc: $1-gensrc-moduleinfo
 endef
@@ -217,6 +217,21 @@ $(eval $(call DeclareRecipesForPhase, LIBS, \
 
 ALL_TARGETS += $(LIBS_TARGETS)
 
+################################################################################
+# Targets for compiling static versions of certain native libraries. These do
+# not end up in the jmods or the normal JDK image, but are instead bundled into
+# a special deliverable.
+$(eval $(call DeclareRecipesForPhase, STATIC_LIBS, \
+    TARGET_SUFFIX := static-libs, \
+    FILE_PREFIX := Lib, \
+    MAKE_SUBDIR := lib, \
+    CHECK_MODULES := $(STATIC_LIBS_MODULES), \
+    USE_WRAPPER := true, \
+    EXTRA_ARGS := STATIC_LIBS=true, \
+))
+
+ALL_TARGETS += $(STATIC_LIBS_TARGETS)
+
 ################################################################################
 # Targets for compiling native executables
 $(eval $(call DeclareRecipesForPhase, LAUNCHER, \
@@ -377,6 +392,9 @@ legacy-jre-image:
 symbols-image:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Images.gmk symbols)
 
+static-libs-image:
+	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f StaticLibsImage.gmk)
+
 mac-jdk-bundle:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f MacBundles.gmk jdk-bundle)
 
@@ -396,7 +414,7 @@ endif
 
 ALL_TARGETS += store-source-revision create-source-revision-tracker bootcycle-images zip-security \
     zip-source jrtfs-jar jdk-image legacy-jre-image \
-    symbols-image mac-jdk-bundle mac-legacy-jre-bundle \
+    symbols-image static-libs-image mac-jdk-bundle mac-legacy-jre-bundle \
     release-file exploded-image-optimize jcov-image
 
 ################################################################################
@@ -614,12 +632,16 @@ test-bundles:
 docs-bundles:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk docs-bundles)
 
+static-libs-bundles:
+	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk static-libs-bundles)
+
 ifeq ($(JCOV_ENABLED), true)
   jcov-bundles:
 	+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk jcov-bundles)
 endif
 
-ALL_TARGETS += product-bundles legacy-bundles test-bundles docs-bundles jcov-bundles
+ALL_TARGETS += product-bundles legacy-bundles test-bundles docs-bundles \
+    static-libs-bundles jcov-bundles
 
 ################################################################################
 # Install targets
@@ -707,6 +729,8 @@ else
   $(foreach m, $(JAVA_MODULES), \
       $(eval $m-java: $(addsuffix -java, $(filter $(JAVA_MODULES), \
       $(call FindDepsForModule,$m)))))
+  # Declare dependencies between the module meta targets
+  $(foreach m, $(ALL_MODULES), $(eval $m: $(call FindDepsForModule,$m)))
 
   # Declare dependencies between <module>-rmic to <module>-java
   $(foreach m, $(RMIC_MODULES), $(eval $m-rmic: $m-java))
@@ -794,6 +818,10 @@ else
   vscode-project-rtags: compile-commands
   vscode-project-ccls: compile-commands
 
+  # The -static-libs targets depend on -java as well as java.base-copy.
+  $(foreach m, $(filter $(JAVA_MODULES), $(STATIC_LIBS_MODULES)), \
+    $(eval $m-static-libs: $m-java java.base-copy))
+
   # Jmods cannot be created until we have the jmod tool ready to run. During
   # a normal build we run it from the exploded image, but when cross compiling
   # it's run from the buildjdk, which is either created at build time or user
@@ -856,6 +884,8 @@ else
   legacy-jre-image: jmods release-file
   symbols-image: $(LIBS_TARGETS) $(LAUNCHER_TARGETS)
 
+  static-libs-image: $(STATIC_LIBS_TARGETS)
+
   mac-jdk-bundle: jdk-image
   mac-legacy-jre-bundle: legacy-jre-image
 
@@ -944,6 +974,8 @@ else
 
   jcov-bundles: jcov-image
 
+  static-libs-bundles: static-libs-image
+
   generate-summary: jmods buildtools-modules
 
   update-x11wrappers: java.base-copy buildtools-jdk
@@ -982,6 +1014,8 @@ rmic: $(RMIC_TARGETS)
 
 libs: $(LIBS_TARGETS)
 
+static-libs: $(STATIC_LIBS_TARGETS)
+
 launchers: $(LAUNCHER_TARGETS)
 
 jmods: $(JMOD_TARGETS)
@@ -1092,10 +1126,10 @@ endif
 all-images: product-images test-image docs-image
 
 # all-bundles packages all our deliverables as tar.gz bundles.
-all-bundles: product-bundles test-bundles docs-bundles
+all-bundles: product-bundles test-bundles docs-bundles static-libs-bundles
 
 ALL_TARGETS += buildtools hotspot hotspot-libs hotspot-gensrc gensrc gendata \
-    copy java rmic libs launchers jmods \
+    copy java rmic libs static-libs launchers jmods \
     jdk.jdwp.agent-gensrc $(ALL_MODULES) demos \
     exploded-image-base exploded-image \
     create-buildjdk docs-jdk-api docs-javase-api docs-reference-api docs-jdk \

make/MainSupport.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -133,7 +133,7 @@ define DeclareRecipeForModuleMakefile
 	      $$(addprefix -I, $$(PHASE_MAKEDIRS) \
 	          $$(addsuffix /$$($1_MAKE_SUBDIR), $$(PHASE_MAKEDIRS)) \
 	      ) \
-	      MODULE=$2 MAKEFILE_PREFIX=$$($1_FILE_PREFIX))
+	      MODULE=$2 MAKEFILE_PREFIX=$$($1_FILE_PREFIX) $$($1_EXTRA_ARGS))
         else
 	  +($(CD) $$(dir $$(firstword $$(wildcard $$(addsuffix \
 	      /$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, $$(PHASE_MAKEDIRS))))) \
@@ -142,7 +142,7 @@ define DeclareRecipeForModuleMakefile
 	      $$(addprefix -I, $$(PHASE_MAKEDIRS) \
 	          $$(addsuffix /$$($1_MAKE_SUBDIR), $$(PHASE_MAKEDIRS)) \
 	      ) \
-	      MODULE=$2 \
+	      MODULE=$2 $$($1_EXTRA_ARGS) \
 	  )
         endif
 
@@ -182,12 +182,13 @@ endef
 # CHECK_MODULES : List of modules to try
 # MULTIPLE_MAKEFILES : Set to true to handle makefiles for the same module and
 #                      phase in multiple repos
+# EXTRA_ARGS : Add extra make args to each makefile call
 # Exported variables:
 # $1_MODULES : All modules that had rules generated
 # $1_TARGETS : All targets generated
 define DeclareRecipesForPhase
-  $(foreach i,2 3 4 5 6 7, $(if $(strip $($i)),$(strip $1)_$(strip $($i)))$(NEWLINE))
-  $(if $(8),$(error Internal makefile error: Too many arguments to \
+  $(foreach i,2 3 4 5 6 7 8, $(if $(strip $($i)),$(strip $1)_$(strip $($i)))$(NEWLINE))
+  $(if $(9),$(error Internal makefile error: Too many arguments to \
       DeclareRecipesForPhase, please update MakeHelper.gmk))
 
   $$(foreach m, $$($(strip $1)_CHECK_MODULES), \

make/ModuleWrapper.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/RunTests.gmk

@@ -98,13 +98,15 @@ endif
 JTREG_FAILURE_HANDLER_DIR := $(TEST_IMAGE_DIR)/failure_handler
 JTREG_FAILURE_HANDLER := $(JTREG_FAILURE_HANDLER_DIR)/jtregFailureHandler.jar
 
+JTREG_FAILURE_HANDLER_TIMEOUT ?= 0
+
 ifneq ($(wildcard $(JTREG_FAILURE_HANDLER)), )
   JTREG_FAILURE_HANDLER_OPTIONS := \
       -timeoutHandlerDir:$(JTREG_FAILURE_HANDLER) \
       -observerDir:$(JTREG_FAILURE_HANDLER) \
       -timeoutHandler:jdk.test.failurehandler.jtreg.GatherProcessInfoTimeoutHandler \
       -observer:jdk.test.failurehandler.jtreg.GatherDiagnosticInfoObserver \
-      -timeoutHandlerTimeout:0
+      -timeoutHandlerTimeout:$(JTREG_FAILURE_HANDLER_TIMEOUT)
 endif
 
 GTEST_LAUNCHER_DIRS := $(patsubst %/gtestLauncher, %, \
@@ -183,13 +185,13 @@ define SetupAotModuleBody
 	    $$(FIXPATH) $$(JDK_UNDER_TEST)/bin/jaotc \
 	        $$($1_JAOTC_OPTS) --output $$@ --module $$($1_MODULE) \
 	)
-	$$(call ExecuteWithLog, $$@.check, \
+	$$(call ExecuteWithLog, $$@.check, ( \
 	    $$(FIXPATH) $$(JDK_UNDER_TEST)/bin/java \
 	        $$($1_VM_OPTIONS) -XX:+UnlockDiagnosticVMOptions -XX:+UnlockExperimentalVMOptions \
 	        -XX:+PrintAOT -XX:+UseAOTStrictLoading \
 	        -XX:AOTLibrary=$$@ -version \
 	         > $$@.verify-aot \
-	)
+	))
 
   $1_AOT_OPTIONS += -XX:+UnlockExperimentalVMOptions
   $1_AOT_OPTIONS += -XX:AOTLibrary=$$($1_AOT_LIB)
@@ -245,11 +247,29 @@ ifeq ($(TEST_JOBS), 0)
       CORES_DIVIDER := 4
     endif
   endif
+  # For some big multi-core machines with low ulimit -u setting we hit the max
+  # threads/process limit. In such a setup the memory/cores-only-guided
+  # TEST_JOBS config is insufficient. From experience a concurrency setting of
+  # 14 works reasonably well for low ulimit values (<= 4096). Thus, use
+  # divider 4096/14. For high ulimit -u values this shouldn't make a difference.
+  ULIMIT_DIVIDER := (4096/14)
+  PROC_ULIMIT := -1
+  ifneq ($(OPENJDK_TARGET_OS), windows)
+    PROC_ULIMIT := $(shell $(ULIMIT) -u)
+    ifeq ($(PROC_ULIMIT), unlimited)
+      PROC_ULIMIT := -1
+    endif
+  endif
   MEMORY_DIVIDER := 2048
   TEST_JOBS := $(shell $(AWK) \
     'BEGIN { \
       c = $(NUM_CORES) / $(CORES_DIVIDER); \
       m = $(MEMORY_SIZE) / $(MEMORY_DIVIDER); \
+      u = $(PROC_ULIMIT); \
+      if (u > -1) { \
+        u = u / $(ULIMIT_DIVIDER); \
+        if (u < c) c = u; \
+      } \
       if (c > m) c = m; \
       c = c * $(TEST_JOBS_FACTOR); \
       c = c * $(TEST_JOBS_FACTOR_JDL); \
@@ -276,10 +296,12 @@ $(eval $(call SetTestOpt,AOT_MODULES,JTREG))
 
 $(eval $(call SetTestOpt,JOBS,JTREG))
 $(eval $(call SetTestOpt,TIMEOUT_FACTOR,JTREG))
+$(eval $(call SetTestOpt,FAILURE_HANDLER_TIMEOUT,JTREG))
 
 $(eval $(call ParseKeywordVariable, JTREG, \
-    SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR TEST_MODE ASSERT VERBOSE RETAIN \
-        MAX_MEM RUN_PROBLEM_LISTS, \
+    SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR FAILURE_HANDLER_TIMEOUT \
+        TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM RUN_PROBLEM_LISTS \
+        RETRY_COUNT, \
     STRING_KEYWORDS := OPTIONS JAVA_OPTIONS VM_OPTIONS KEYWORDS \
         EXTRA_PROBLEM_LISTS AOT_MODULES, \
 ))
@@ -590,7 +612,7 @@ define SetupRunGtestTestBody
 	$$(call LogWarn)
 	$$(call LogWarn, Running test '$$($1_TEST)')
 	$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
-	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/gtest, \
+	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/gtest, ( \
 	    $$(FIXPATH) $$(TEST_IMAGE_DIR)/hotspot/gtest/$$($1_VARIANT)/gtestLauncher \
 	        -jdk $(JDK_UNDER_TEST) $$($1_GTEST_FILTER) \
 	        --gtest_output=xml:$$($1_TEST_RESULTS_DIR)/gtest.xml \
@@ -599,7 +621,7 @@ define SetupRunGtestTestBody
 	        > >($(TEE) $$($1_TEST_RESULTS_DIR)/gtest.txt) \
 	    && $$(ECHO) $$$$? > $$($1_EXITCODE) \
 	    || $$(ECHO) $$$$? > $$($1_EXITCODE) \
-	)
+	))
 
   $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/gtest.txt
 
@@ -679,7 +701,8 @@ define SetupRunMicroTestBody
   endif
 
   ifneq ($$(MICRO_VM_OPTIONS)$$(MICRO_JAVA_OPTIONS), )
-    $1_MICRO_VM_OPTIONS := -jvmArgs $$(MICRO_VM_OPTIONS) $$(MICRO_JAVA_OPTIONS)
+    JMH_JVM_ARGS := $$(MICRO_VM_OPTIONS) $$(MICRO_JAVA_OPTIONS)
+    $1_MICRO_VM_OPTIONS := -jvmArgs $(call ShellQuote,$$(JMH_JVM_ARGS))
   endif
 
   ifneq ($$(MICRO_ITER), )
@@ -702,7 +725,7 @@ define SetupRunMicroTestBody
 	$$(call LogWarn)
 	$$(call LogWarn, Running test '$$($1_TEST)')
 	$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
-	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/micro, \
+	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/micro, ( \
 	    $$(FIXPATH) $$($1_MICRO_TEST_JDK)/bin/java $$($1_MICRO_JAVA_OPTIONS) \
 	        -jar $$($1_MICRO_BENCHMARKS_JAR) \
 	        $$($1_MICRO_ITER) $$($1_MICRO_FORK) $$($1_MICRO_TIME) \
@@ -712,7 +735,7 @@ define SetupRunMicroTestBody
 	        > >($(TEE) $$($1_TEST_RESULTS_DIR)/micro.txt) \
 	    && $$(ECHO) $$$$? > $$($1_EXITCODE) \
 	    || $$(ECHO) $$$$? > $$($1_EXITCODE) \
-	)
+	))
 
   $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/micro.txt
 
@@ -830,6 +853,7 @@ define SetupRunJtregTestBody
   JTREG_VERBOSE ?= fail,error,summary
   JTREG_RETAIN ?= fail,error
   JTREG_RUN_PROBLEM_LISTS ?= false
+  JTREG_RETRY_COUNT ?= 0
 
   ifneq ($$($1_JTREG_MAX_MEM), 0)
     $1_JTREG_BASIC_OPTIONS += -vmoption:-Xmx$$($1_JTREG_MAX_MEM)
@@ -921,26 +945,44 @@ define SetupRunJtregTestBody
   clean-workdir-$1:
 	$$(RM) -r $$($1_TEST_SUPPORT_DIR)
 
+  $1_COMMAND_LINE := \
+      $$(JAVA) $$($1_JTREG_LAUNCHER_OPTIONS) \
+          -Dprogram=jtreg -jar $$(JT_HOME)/lib/jtreg.jar \
+          $$($1_JTREG_BASIC_OPTIONS) \
+          -testjdk:$$(JDK_UNDER_TEST) \
+          -dir:$$(JTREG_TOPDIR) \
+          -reportDir:$$($1_TEST_RESULTS_DIR) \
+          -workDir:$$($1_TEST_SUPPORT_DIR) \
+          -status:$$$${JTREG_STATUS} \
+          $$(JTREG_OPTIONS) \
+          $$(JTREG_FAILURE_HANDLER_OPTIONS) \
+          $$(JTREG_COV_OPTIONS) \
+          $$($1_TEST_NAME) \
+      && $$(ECHO) $$$$? > $$($1_EXITCODE) \
+      || $$(ECHO) $$$$? > $$($1_EXITCODE)
+
+
+  ifneq ($$(JTREG_RETRY_COUNT), 0)
+    $1_COMMAND_LINE := \
+        for i in {0..$$(JTREG_RETRY_COUNT)}; do \
+          if [ "$$$$i" != 0 ]; then \
+            $$(PRINTF) "\nRetrying Jtreg run. Attempt: $$$$i\n"; \
+          fi; \
+          $$($1_COMMAND_LINE); \
+          if [ "`$$(CAT) $$($1_EXITCODE)`" = "0" ]; then \
+            break; \
+          fi; \
+          export JTREG_STATUS="-status:error,fail"; \
+        done
+  endif
+
   run-test-$1: pre-run-test clean-workdir-$1 $$($1_AOT_TARGETS)
 	$$(call LogWarn)
 	$$(call LogWarn, Running test '$$($1_TEST)')
 	$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
-	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/jtreg, \
-	    $$(COV_ENVIRONMENT) \
-	    $$(JAVA) $$($1_JTREG_LAUNCHER_OPTIONS) \
-	        -Dprogram=jtreg -jar $$(JT_HOME)/lib/jtreg.jar \
-	        $$($1_JTREG_BASIC_OPTIONS) \
-	        -testjdk:$$(JDK_UNDER_TEST) \
-	        -dir:$$(JTREG_TOPDIR) \
-	        -reportDir:$$($1_TEST_RESULTS_DIR) \
-	        -workDir:$$($1_TEST_SUPPORT_DIR) \
-	        $$(JTREG_OPTIONS) \
-	        $$(JTREG_FAILURE_HANDLER_OPTIONS) \
-	        $$(JTREG_COV_OPTIONS) \
-	        $$($1_TEST_NAME) \
-	    && $$(ECHO) $$$$? > $$($1_EXITCODE) \
-	    || $$(ECHO) $$$$? > $$($1_EXITCODE) \
-	)
+	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/jtreg, ( \
+            $$(COV_ENVIRONMENT) $$($1_COMMAND_LINE) \
+	))
 
   $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/text/stats.txt
 
@@ -1016,12 +1058,12 @@ define SetupRunSpecialTestBody
 	$$(call LogWarn)
 	$$(call LogWarn, Running test '$$($1_TEST)')
 	$$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR))
-	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/test-execution, \
+	$$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/test-execution, ( \
 	    $$($1_TEST_COMMAND_LINE) \
 	        > >($(TEE) $$($1_TEST_RESULTS_DIR)/test-output.txt) \
 	    && $$(ECHO) $$$$? > $$($1_EXITCODE) \
 	    || $$(ECHO) $$$$? > $$($1_EXITCODE) \
-	)
+	))
 
   $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/gtest.txt
 

make/RunTestsPrebuilt.gmk

@@ -230,7 +230,7 @@ else ifeq ($(OPENJDK_TARGET_OS), macosx)
   NUM_CORES := $(shell /usr/sbin/sysctl -n hw.ncpu)
   MEMORY_SIZE := $(shell $(EXPR) `/usr/sbin/sysctl -n hw.memsize` / 1024 / 1024)
 else ifeq ($(OPENJDK_TARGET_OS), solaris)
-  NUM_CORES := $(shell LC_MESSAGES=C /usr/sbin/psrinfo -v | $(GREP) -c on-line)
+  NUM_CORES := $(shell /usr/sbin/psrinfo -v | $(GREP) -c on-line)
   MEMORY_SIZE := $(shell \
       /usr/sbin/prtconf 2> /dev/null | $(GREP) "^Memory [Ss]ize" | $(AWK) '{print $$3}' \
   )

make/RunTestsPrebuiltSpec.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2017, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2017, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -27,6 +27,9 @@
 # Fake minimalistic spec file for RunTestsPrebuilt.gmk.
 ################################################################################
 
+# Make sure all shell commands are executed with the C locale
+export LC_ALL := C
+
 define VerifyVariable
   ifeq ($$($1), )
     $$(info Error: Variable $1 is missing, needed by RunTestPrebuiltSpec.gmk)
@@ -172,6 +175,7 @@ UNZIP := unzip
 EXPR := expr
 FILE := file
 HG := hg
+ULIMIT := ulimit
 
 # On Solaris gnu versions of some tools are required.
 ifeq ($(OPENJDK_BUILD_OS), solaris)

make/StaticLibsImage.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -23,30 +23,32 @@
 # questions.
 #
 
-include LibCommon.gmk
+# This makefile creates an image of the optional static versions of certain JDK
+# libraries.
+
+default: all
+
+include $(SPEC)
+include MakeBase.gmk
+include Modules.gmk
 
 ################################################################################
 
-$(eval $(call SetupJdkLibrary, BUILD_LIBUNPACK, \
-    NAME := unpack, \
-    EXTRA_SRC := common-unpack, \
-    TOOLCHAIN := TOOLCHAIN_LINK_CXX, \
-    OPTIMIZATION := LOW, \
-    CFLAGS := $(CXXFLAGS_JDKLIB) \
-        -DNO_ZLIB -DUNPACK_JNI -DFULL, \
-    CFLAGS_release := -DPRODUCT, \
-    EXTRA_HEADER_DIRS := $(call GetJavaHeaderDir, java.base), \
-    DISABLED_WARNINGS_gcc := implicit-fallthrough, \
-    DISABLED_WARNINGS_clang := format-nonliteral, \
-    LDFLAGS := $(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK) \
-        $(call SET_SHARED_LIBRARY_ORIGIN), \
-    LDFLAGS_windows := -map:$(SUPPORT_OUTPUTDIR)/native/$(MODULE)/unpack.map -debug, \
-    LIBS_unix := -ljvm $(LIBCXX) -ljava, \
-    LIBS_windows := jvm.lib $(WIN_JAVA_LIB), \
-))
+TARGETS :=
 
-$(BUILD_LIBUNPACK): $(call FindLib, java.base, java)
-
-TARGETS += $(BUILD_LIBUNPACK)
+$(foreach m, $(STATIC_LIBS_MODULES), \
+  $(eval $(call SetupCopyFiles, COPY_STATIC_LIBS_$m, \
+      FLATTEN := true, \
+      SRC := $(SUPPORT_OUTPUTDIR)/native/$m, \
+      DEST := $(STATIC_LIBS_IMAGE_DIR)/lib, \
+      FILES := $(filter %$(STATIC_LIBRARY_SUFFIX), \
+          $(call FindFiles, $(SUPPORT_OUTPUTDIR)/native/$m/*/static)), \
+  )) \
+  $(eval TARGETS += $$(COPY_STATIC_LIBS_$m)) \
+)
 
 ################################################################################
+
+all: $(TARGETS)
+
+.PHONY: all

make/TestImage.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2017, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/ToolsJdk.gmk

@@ -106,6 +106,9 @@ TOOL_OSX_TOBIN = $(JAVA_SMALL) -Djava.awt.headless=true -cp $(BUILDTOOLS_OUTPUTD
 TOOL_CLDRCONVERTER = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
     build.tools.cldrconverter.CLDRConverter
 
+TOOL_INTPOLY = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
+    build.tools.intpoly.FieldGen
+
 TOOL_GENERATELSREQUIVMAPS = $(JAVA_SMALL) -cp $(BUILDTOOLS_OUTPUTDIR)/jdk_tools_classes \
     build.tools.generatelsrequivmaps.EquivMapsGenerator
 

make/UpdateBuildDocs.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2017, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -45,29 +45,13 @@ GLOBAL_SPECS_DEFAULT_CSS_FILE := $(TOPDIR)/make/data/docs-resources/resources/jd
 
 DOCS_DIR := $(TOPDIR)/doc
 
-$(eval $(call SetupProcessMarkdown, building, \
-  FILES := $(DOCS_DIR)/building.md, \
+$(eval $(call SetupProcessMarkdown, md_docs, \
+  FILES := $(call FindFiles, $(DOCS_DIR), *.md), \
   DEST := $(DOCS_DIR), \
   CSS := $(GLOBAL_SPECS_DEFAULT_CSS_FILE), \
   OPTIONS := --toc, \
 ))
-TARGETS += $(building)
-
-$(eval $(call SetupProcessMarkdown, testing, \
-  FILES := $(DOCS_DIR)/testing.md, \
-  DEST := $(DOCS_DIR), \
-  CSS := $(GLOBAL_SPECS_DEFAULT_CSS_FILE), \
-  OPTIONS := --toc, \
-))
-TARGETS += $(testing)
-
-$(eval $(call SetupProcessMarkdown, ide, \
-  FILES := $(DOCS_DIR)/ide.md, \
-  DEST := $(DOCS_DIR), \
-  CSS := $(GLOBAL_SPECS_DEFAULT_CSS_FILE), \
-  OPTIONS := --toc, \
-))
-TARGETS += $(ide)
+TARGETS += $(md_docs)
 
 ################################################################################
 

make/ZipSecurity.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/autoconf/basics.m4

@@ -205,6 +205,34 @@ AC_DEFUN([BASIC_PREPEND_TO_PATH],
   fi
 ])
 
+################################################################################
+# This will make a path absolute. Assumes it's already a unix path. Also
+# resolves ~ to homedir.
+AC_DEFUN([BASIC_ABSOLUTE_PATH],
+[
+  if test "x[$]$1" != x; then
+    new_path="[$]$1"
+
+    # Use eval to expand a potential ~. This technique does not work if there
+    # are spaces in the path (which is valid at this point on Windows), so only
+    # try to apply it if there is an actual ~ first in the path.
+    if [ [[ "$new_path" = "~"* ]] ]; then
+      eval new_path="$new_path"
+      if test ! -f "$new_path" && test ! -d "$new_path"; then
+        AC_MSG_ERROR([The new_path of $1, which resolves as "$new_path", is not found.])
+      fi
+    fi
+
+    if test -d "$new_path"; then
+      $1="`cd "$new_path"; $THEPWDCMD -L`"
+    else
+      dir="`$DIRNAME "$new_path"`"
+      base="`$BASENAME "$new_path"`"
+      $1="`cd "$dir"; $THEPWDCMD -L`/$base"
+    fi
+  fi
+])
+
 ###############################################################################
 # This will make sure the given variable points to a full and proper
 # path. This means:
@@ -217,7 +245,6 @@ AC_DEFUN([BASIC_PREPEND_TO_PATH],
 AC_DEFUN([BASIC_FIXUP_PATH],
 [
   # Only process if variable expands to non-empty
-
   if test "x[$]$1" != x; then
     if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
       BASIC_FIXUP_PATH_CYGWIN($1)
@@ -234,19 +261,8 @@ AC_DEFUN([BASIC_FIXUP_PATH],
         AC_MSG_ERROR([Spaces are not allowed in this path.])
       fi
 
-      # Use eval to expand a potential ~
-      eval path="$path"
-      if test ! -f "$path" && test ! -d "$path"; then
-        AC_MSG_ERROR([The path of $1, which resolves as "$path", is not found.])
-      fi
-
-      if test -d "$path"; then
-        $1="`cd "$path"; $THEPWDCMD -L`"
-      else
-        dir="`$DIRNAME "$path"`"
-        base="`$BASENAME "$path"`"
-        $1="`cd "$dir"; $THEPWDCMD -L`/$base"
-      fi
+      BASIC_ABSOLUTE_PATH(path)
+      $1="$path"
     fi
   fi
 ])
@@ -411,7 +427,7 @@ AC_DEFUN_ONCE([BASIC_INIT],
   # Save the path variable before it gets changed
   ORIGINAL_PATH="$PATH"
   AC_SUBST(ORIGINAL_PATH)
-  DATE_WHEN_CONFIGURED=`LANG=C date`
+  DATE_WHEN_CONFIGURED=`date`
   AC_SUBST(DATE_WHEN_CONFIGURED)
   AC_MSG_NOTICE([Configuration created at $DATE_WHEN_CONFIGURED.])
 ])
@@ -473,31 +489,43 @@ AC_DEFUN([BASIC_SETUP_TOOL],
       # for unknown variables in the end.
       CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
 
+      tool_override=[$]$1
+      AC_MSG_NOTICE([User supplied override $1="$tool_override"])
+
       # Check if we try to supply an empty value
-      if test "x[$]$1" = x; then
-        AC_MSG_NOTICE([Setting user supplied tool $1= (no value)])
+      if test "x$tool_override" = x; then
         AC_MSG_CHECKING([for $1])
         AC_MSG_RESULT([disabled])
       else
+        # Split up override in command part and argument part
+        tool_and_args=($tool_override)
+        [ tool_command=${tool_and_args[0]} ]
+        [ unset 'tool_and_args[0]' ]
+        [ tool_args=${tool_and_args[@]} ]
+
         # Check if the provided tool contains a complete path.
-        tool_specified="[$]$1"
-        tool_basename="${tool_specified##*/}"
-        if test "x$tool_basename" = "x$tool_specified"; then
+        tool_basename="${tool_command##*/}"
+        if test "x$tool_basename" = "x$tool_command"; then
           # A command without a complete path is provided, search $PATH.
-          AC_MSG_NOTICE([Will search for user supplied tool $1=$tool_basename])
+          AC_MSG_NOTICE([Will search for user supplied tool "$tool_basename"])
           AC_PATH_PROG($1, $tool_basename)
           if test "x[$]$1" = x; then
-            AC_MSG_ERROR([User supplied tool $tool_basename could not be found])
+            AC_MSG_ERROR([User supplied tool $1="$tool_basename" could not be found])
           fi
         else
           # Otherwise we believe it is a complete path. Use it as it is.
-          AC_MSG_NOTICE([Will use user supplied tool $1=$tool_specified])
-          AC_MSG_CHECKING([for $1])
-          if test ! -x "$tool_specified"; then
+          AC_MSG_NOTICE([Will use user supplied tool "$tool_command"])
+          AC_MSG_CHECKING([for $tool_command])
+          if test ! -x "$tool_command"; then
             AC_MSG_RESULT([not found])
-            AC_MSG_ERROR([User supplied tool $1=$tool_specified does not exist or is not executable])
+            AC_MSG_ERROR([User supplied tool $1="$tool_command" does not exist or is not executable])
           fi
-          AC_MSG_RESULT([$tool_specified])
+           $1="$tool_command"
+          AC_MSG_RESULT([found])
+        fi
+        if test "x$tool_args" != x; then
+          # If we got arguments, re-append them to the command after the fixup.
+          $1="[$]$1 $tool_args"
         fi
       fi
     fi
@@ -545,6 +573,26 @@ AC_DEFUN([BASIC_REQUIRE_SPECIAL],
   BASIC_CHECK_NONEMPTY($1)
 ])
 
+###############################################################################
+# Like BASIC_REQUIRE_PROGS but also allows for bash built-ins
+# $1: variable to set
+# $2: executable name (or list of names) to look for
+# $3: [path]
+AC_DEFUN([BASIC_REQUIRE_BUILTIN_PROGS],
+[
+  BASIC_SETUP_TOOL($1, [AC_PATH_PROGS($1, $2, , $3)])
+  if test "x[$]$1" = x; then
+    AC_MSG_NOTICE([Required tool $2 not found in PATH, checking built-in])
+    if help $2 > /dev/null 2>&1; then
+      AC_MSG_NOTICE([Found $2 as shell built-in. Using it])
+      $1="$2"
+    else
+      AC_MSG_ERROR([Required tool $2 also not found as built-in.])
+    fi
+  fi
+  BASIC_CHECK_NONEMPTY($1)
+])
+
 ###############################################################################
 # Setup the most fundamental tools that relies on not much else to set up,
 # but is used by much of the early bootstrap code.
@@ -1134,6 +1182,8 @@ AC_DEFUN([BASIC_CHECK_TAR],
     TAR_TYPE="bsd"
   elif test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
     TAR_TYPE="solaris"
+  elif test "x$OPENJDK_BUILD_OS" = "xaix"; then
+    TAR_TYPE="aix"
   fi
   AC_MSG_CHECKING([what type of tar was found])
   AC_MSG_RESULT([$TAR_TYPE])
@@ -1147,6 +1197,11 @@ AC_DEFUN([BASIC_CHECK_TAR],
       # When using gnu tar for Solaris targets, need to use compatibility mode
       TAR_CREATE_EXTRA_PARAM="--format=ustar"
     fi
+  elif test "x$TAR_TYPE" = "aix"; then
+    # -L InputList of aix tar: name of file listing the files and directories
+    # that need to be   archived or extracted
+    TAR_INCLUDE_PARAM="L"
+    TAR_SUPPORTS_TRANSFORM="false"
   else
     TAR_INCLUDE_PARAM="I"
     TAR_SUPPORTS_TRANSFORM="false"
@@ -1232,12 +1287,23 @@ AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
     BASIC_REQUIRE_PROGS(MIG, mig)
     BASIC_REQUIRE_PROGS(XATTR, xattr)
     BASIC_PATH_PROGS(CODESIGN, codesign)
+
     if test "x$CODESIGN" != "x"; then
-      # Verify that the openjdk_codesign certificate is present
-      AC_MSG_CHECKING([if openjdk_codesign certificate is present])
+      # Check for user provided code signing identity.
+      # If no identity was provided, fall back to "openjdk_codesign".
+      AC_ARG_WITH([macosx-codesign-identity], [AS_HELP_STRING([--with-macosx-codesign-identity],
+        [specify the code signing identity])],
+        [MACOSX_CODESIGN_IDENTITY=$with_macosx_codesign_identity],
+        [MACOSX_CODESIGN_IDENTITY=openjdk_codesign]
+      )
+
+      AC_SUBST(MACOSX_CODESIGN_IDENTITY)
+
+      # Verify that the codesign certificate is present
+      AC_MSG_CHECKING([if codesign certificate is present])
       $RM codesign-testfile
       $TOUCH codesign-testfile
-      $CODESIGN -s openjdk_codesign codesign-testfile 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
+      $CODESIGN -s "$MACOSX_CODESIGN_IDENTITY" codesign-testfile 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
       $RM codesign-testfile
       if test "x$CODESIGN" = x; then
         AC_MSG_RESULT([no])
@@ -1249,6 +1315,9 @@ AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
   elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
     BASIC_REQUIRE_PROGS(ELFEDIT, elfedit)
   fi
+  if ! test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+    BASIC_REQUIRE_BUILTIN_PROGS(ULIMIT, ulimit)
+  fi
 ])
 
 ###############################################################################

make/autoconf/basics_windows.m4

@@ -148,6 +148,8 @@ AC_DEFUN([BASIC_FIXUP_PATH_CYGWIN],
   path="[$]$1"
   new_path=`$CYGPATH -u "$path"`
 
+  BASIC_ABSOLUTE_PATH(new_path)
+
   # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
   # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
   # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
@@ -181,6 +183,8 @@ AC_DEFUN([BASIC_FIXUP_PATH_MSYS],
     new_path=`cmd //c echo $path`
   fi
 
+  BASIC_ABSOLUTE_PATH(new_path)
+
   BASIC_MAKE_WINDOWS_SPACE_SAFE_MSYS([$new_path])
   BASIC_WINDOWS_REWRITE_AS_UNIX_PATH(new_path)
   if test "x$path" != "x$new_path"; then
@@ -199,6 +203,8 @@ AC_DEFUN([BASIC_FIXUP_PATH_WSL],
   new_path="[$]$1"
   BASIC_WINDOWS_REWRITE_AS_UNIX_PATH([new_path])
 
+  BASIC_ABSOLUTE_PATH(new_path)
+
   # Call helper function which possibly converts this using DOS-style short mode.
   # If so, the updated path is stored in $new_path.
   BASIC_MAKE_WINDOWS_SPACE_SAFE_WSL([$new_path])

make/autoconf/boot-jdk.m4

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -345,7 +345,7 @@ AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK],
 
   # When compiling code to be executed by the Boot JDK, force compatibility with the
   # oldest supported bootjdk.
-  BOOT_JDK_SOURCETARGET="-source 9 -target 9"
+  BOOT_JDK_SOURCETARGET="-source 13 -target 13"
   AC_SUBST(BOOT_JDK_SOURCETARGET)
 
   AC_SUBST(JAVAC_FLAGS)

make/autoconf/build-performance.m4

@@ -35,7 +35,7 @@ AC_DEFUN([BPERF_CHECK_CORES],
     FOUND_CORES=yes
   elif test -x /usr/sbin/psrinfo; then
     # Looks like a Solaris system
-    NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
+    NUM_CORES=`/usr/sbin/psrinfo -v | grep -c on-line`
     FOUND_CORES=yes
   elif test -x /usr/sbin/sysctl; then
     # Looks like a MacOSX system

make/autoconf/buildjdk-spec.gmk.in

@@ -91,7 +91,7 @@ DISABLE_WARNING_PREFIX := @BUILD_CC_DISABLE_WARNING_PREFIX@
 # Save speed and disk space by not enabling debug symbols for the buildjdk
 ENABLE_DEBUG_SYMBOLS := false
 
-# Control wether Hotspot builds gtest tests
+# Control whether Hotspot builds gtest tests
 BUILD_GTEST := false
 
 JVM_VARIANTS := server

make/autoconf/compare.sh.in

@@ -67,7 +67,6 @@ export STRIP="@STRIP@ @STRIPFLAGS@"
 export TAR="@TAR@"
 export TEE="@TEE@"
 export UNIQ="@UNIQ@"
-export UNPACK200="@FIXPATH@ @BOOT_JDK@/bin/unpack200"
 export UNARCHIVE="@UNZIP@ -q -o"
 
 export TOPDIR="@TOPDIR@"

make/autoconf/configure

@@ -43,6 +43,9 @@ fi
 export CONFIG_SHELL=$BASH
 export _as_can_reexec=no
 
+# Make sure all shell commands are executed with the C locale
+export LC_ALL=C
+
 if test "x$CUSTOM_CONFIG_DIR" != x; then
   custom_hook=$CUSTOM_CONFIG_DIR/custom-hook.m4
   if test ! -e $custom_hook; then

make/autoconf/configure.ac

@@ -1,5 +1,5 @@
-SRC#
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+#
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/autoconf/flags-cflags.m4

@@ -121,11 +121,7 @@ AC_DEFUN([FLAGS_SETUP_DEBUG_SYMBOLS],
     # -g0 enables debug symbols without disabling inlining.
     CFLAGS_DEBUG_SYMBOLS="-g0 -xs"
   elif test "x$TOOLCHAIN_TYPE" = xxlc; then
-    if test "x$XLC_USES_CLANG" = xtrue; then
-      CFLAGS_DEBUG_SYMBOLS="-g1"
-    else
-      CFLAGS_DEBUG_SYMBOLS="-g"
-    fi
+    CFLAGS_DEBUG_SYMBOLS="-g1"
   elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
     CFLAGS_DEBUG_SYMBOLS="-Z7 -d2Zi+"
   fi
@@ -174,11 +170,11 @@ AC_DEFUN([FLAGS_SETUP_WARNINGS],
       DISABLE_WARNING_PREFIX="-erroff="
       CFLAGS_WARNINGS_ARE_ERRORS="-errwarn=%all"
 
-      WARNINGS_ENABLE_ALL_CFLAGS="-v"
-      WARNINGS_ENABLE_ALL_CXXFLAGS="+w"
+      WARNINGS_ENABLE_ALL_CFLAGS="-v -fd -xtransition"
+      WARNINGS_ENABLE_ALL_CXXFLAGS="+w +w2"
 
-      DISABLED_WARNINGS_C=""
-      DISABLED_WARNINGS_CXX=""
+      DISABLED_WARNINGS_C="E_OLD_STYLE_FUNC_DECL E_OLD_STYLE_FUNC_DEF E_SEMANTICS_OF_OP_CHG_IN_ANSI_C E_NO_REPLACEMENT_IN_STRING E_DECLARATION_IN_CODE"
+      DISABLED_WARNINGS_CXX="inllargeuse inllargeint notused wemptydecl notemsource"
       ;;
 
     gcc)
@@ -194,20 +190,7 @@ AC_DEFUN([FLAGS_SETUP_WARNINGS],
       WARNINGS_ENABLE_ALL_CXXFLAGS="$WARNINGS_ENABLE_ALL_CFLAGS $WARNINGS_ENABLE_ADDITIONAL_CXX"
 
       DISABLED_WARNINGS="unused-parameter unused"
-
-      # Repeate the check for the BUILD_CC and BUILD_CXX. Need to also reset
-      # CFLAGS since any target specific flags will likely not work with the
-      # build compiler
-      CC_OLD="$CC"
-      CXX_OLD="$CXX"
-      CC="$BUILD_CC"
-      CXX="$BUILD_CXX"
-      CFLAGS_OLD="$CFLAGS"
-      CFLAGS=""
       BUILD_CC_DISABLE_WARNING_PREFIX="-Wno-"
-      CC="$CC_OLD"
-      CXX="$CXX_OLD"
-      CFLAGS="$CFLAGS_OLD"
       ;;
 
     clang)
@@ -424,6 +407,17 @@ AC_DEFUN([FLAGS_SETUP_CFLAGS],
 
   FLAGS_SETUP_CFLAGS_CPU_DEP([TARGET])
 
+  # Repeat the check for the BUILD_CC and BUILD_CXX. Need to also reset CFLAGS
+  # since any target specific flags will likely not work with the build compiler.
+  CC_OLD="$CC"
+  CXX_OLD="$CXX"
+  CFLAGS_OLD="$CFLAGS"
+  CXXFLAGS_OLD="$CXXFLAGS"
+  CC="$BUILD_CC"
+  CXX="$BUILD_CXX"
+  CFLAGS=""
+  CXXFLAGS=""
+
   FLAGS_OS=$OPENJDK_BUILD_OS
   FLAGS_OS_TYPE=$OPENJDK_BUILD_OS_TYPE
   FLAGS_CPU=$OPENJDK_BUILD_CPU
@@ -434,6 +428,11 @@ AC_DEFUN([FLAGS_SETUP_CFLAGS],
   FLAGS_CPU_LEGACY_LIB=$OPENJDK_BUILD_CPU_LEGACY_LIB
 
   FLAGS_SETUP_CFLAGS_CPU_DEP([BUILD], [OPENJDK_BUILD_], [BUILD_])
+
+  CC="$CC_OLD"
+  CXX="$CXX_OLD"
+  CFLAGS="$CFLAGS_OLD"
+  CXXFLAGS="$CXXFLAGS_OLD"
 ])
 
 ################################################################################
@@ -533,6 +532,11 @@ AC_DEFUN([FLAGS_SETUP_CFLAGS_HELPER],
   if test "x$TOOLCHAIN_TYPE" = xgcc; then
     TOOLCHAIN_CFLAGS_JVM="$TOOLCHAIN_CFLAGS_JVM -fcheck-new -fstack-protector"
     TOOLCHAIN_CFLAGS_JDK="-pipe -fstack-protector"
+    # reduce lib size on s390x in link step, this needs also special compile flags
+    if test "x$OPENJDK_TARGET_CPU" = xs390x; then
+      TOOLCHAIN_CFLAGS_JVM="$TOOLCHAIN_CFLAGS_JVM -ffunction-sections -fdata-sections"
+      TOOLCHAIN_CFLAGS_JDK="$TOOLCHAIN_CFLAGS_JDK -ffunction-sections -fdata-sections"
+    fi
     # technically NOT for CXX (but since this gives *worse* performance, use
     # no-strict-aliasing everywhere!)
     TOOLCHAIN_CFLAGS_JDK_CONLY="-fno-strict-aliasing"
@@ -601,7 +605,7 @@ AC_DEFUN([FLAGS_SETUP_CFLAGS_HELPER],
     LANGSTD_CFLAGS="-xc99=all,no_lib"
   elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
     # MSVC doesn't support C99/C11 explicitly, unless you compile as C++:
-    # LANGSTD_CFLAGS="/TP"
+    # LANGSTD_CFLAGS="-TP"
     # but that requires numerous changes to the sources files. So we are limited
     # to C89/C90 plus whatever extensions Visual Studio has decided to implement.
     # This is the lowest bar for shared code.
@@ -698,6 +702,20 @@ AC_DEFUN([FLAGS_SETUP_CFLAGS_HELPER],
       OS_CFLAGS_JVM="$OS_CFLAGS_JVM -DNEEDS_LIBRT"
     fi
   fi
+
+  # Extra flags needed when building optional static versions of certain
+  # JDK libraries.
+  STATIC_LIBS_CFLAGS="-DSTATIC_BUILD=1"
+  if test "x$TOOLCHAIN_TYPE" = xgcc || test "x$TOOLCHAIN_TYPE" = xclang; then
+    STATIC_LIBS_CFLAGS="$STATIC_LIBS_CFLAGS -ffunction-sections -fdata-sections"
+  fi
+  if test "x$TOOLCHAIN_TYPE" = xgcc; then
+    # Disable relax-relocation to enable compatibility with older linkers
+    RELAX_RELOCATIONS_FLAG="-Xassembler -mrelax-relocations=no"
+    FLAGS_COMPILER_CHECK_ARGUMENTS(ARGUMENT: [${RELAX_RELOCATIONS_FLAG}],
+        IF_TRUE: [STATIC_LIBS_CFLAGS="$STATIC_LIBS_CFLAGS ${RELAX_RELOCATIONS_FLAG}"])
+  fi
+  AC_SUBST(STATIC_LIBS_CFLAGS)
 ])
 
 ################################################################################

make/autoconf/flags-ldflags.m4

@@ -70,10 +70,14 @@ AC_DEFUN([FLAGS_SETUP_LDFLAGS_HELPER],
     fi
 
     # Add -z defs, to forbid undefined symbols in object files.
-    BASIC_LDFLAGS="$BASIC_LDFLAGS -Wl,-z,defs"
-
-    BASIC_LDFLAGS_JVM_ONLY="-Wl,-O1 -Wl,-z,relro"
+    # add relro (mark relocations read only) for all libs
+    BASIC_LDFLAGS="$BASIC_LDFLAGS -Wl,-z,defs -Wl,-z,relro"
+    # s390x : remove unused code+data in link step
+    if test "x$OPENJDK_TARGET_CPU" = xs390x; then
+      BASIC_LDFLAGS="$BASIC_LDFLAGS -Wl,--gc-sections -Wl,--print-gc-sections"
+    fi
 
+    BASIC_LDFLAGS_JVM_ONLY="-Wl,-O1"
 
   elif test "x$TOOLCHAIN_TYPE" = xclang; then
     BASIC_LDFLAGS_JVM_ONLY="-mno-omit-leaf-frame-pointer -mstack-alignment=16 \
@@ -120,9 +124,6 @@ AC_DEFUN([FLAGS_SETUP_LDFLAGS_HELPER],
     if test "x$OPENJDK_TARGET_OS" = xlinux; then
       if test x$DEBUG_LEVEL = xrelease; then
         DEBUGLEVEL_LDFLAGS_JDK_ONLY="$DEBUGLEVEL_LDFLAGS_JDK_ONLY -Wl,-O1"
-      else
-        # mark relocations read only on (fast/slow) debug builds
-        DEBUGLEVEL_LDFLAGS_JDK_ONLY="-Wl,-z,relro"
       fi
       if test x$DEBUG_LEVEL = xslowdebug; then
         # do relocations at load

make/autoconf/hotspot.m4

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -25,11 +25,11 @@
 
 # All valid JVM features, regardless of platform
 VALID_JVM_FEATURES="compiler1 compiler2 zero minimal dtrace jvmti jvmci \
-    graal vm-structs jni-check services management cmsgc epsilongc g1gc parallelgc serialgc shenandoahgc zgc nmt cds \
+    graal vm-structs jni-check services management epsilongc g1gc parallelgc serialgc shenandoahgc zgc nmt cds \
     static-build link-time-opt aot jfr"
 
 # Deprecated JVM features (these are ignored, but with a warning)
-DEPRECATED_JVM_FEATURES="trace"
+DEPRECATED_JVM_FEATURES="trace cmsgc"
 
 # All valid JVM variants
 VALID_JVM_VARIANTS="server client minimal core zero custom"
@@ -326,10 +326,6 @@ AC_DEFUN_ONCE([HOTSPOT_SETUP_JVM_FEATURES],
     AC_MSG_ERROR([Specified JVM feature 'jvmci' requires feature 'compiler2' or 'compiler1'])
   fi
 
-  if HOTSPOT_CHECK_JVM_FEATURE(cmsgc) && ! HOTSPOT_CHECK_JVM_FEATURE(serialgc); then
-    AC_MSG_ERROR([Specified JVM feature 'cmsgc' requires feature 'serialgc'])
-  fi
-
   # Enable JFR by default, except for Zero, linux-sparcv9 and on minimal.
   if ! HOTSPOT_CHECK_JVM_VARIANT(zero); then
     if test "x$OPENJDK_TARGET_OS" != xaix; then
@@ -349,9 +345,28 @@ AC_DEFUN_ONCE([HOTSPOT_SETUP_JVM_FEATURES],
   fi
 
   # Only enable ZGC on supported platforms
+  if (test "x$OPENJDK_TARGET_OS" = "xwindows" && test "x$OPENJDK_TARGET_CPU" = "xx86_64"); then
+    AC_MSG_CHECKING([if zgc can be built on windows])
+    AC_COMPILE_IFELSE(
+      [AC_LANG_PROGRAM([[#include <windows.h>]],
+        [[struct MEM_EXTENDED_PARAMETER x;]])
+      ],
+      [
+        AC_MSG_RESULT([yes])
+        CAN_BUILD_ZGC_ON_WINDOWS="yes"
+      ],
+      [
+        AC_MSG_RESULT([no, missing required APIs])
+        CAN_BUILD_ZGC_ON_WINDOWS="no"
+      ]
+    )
+  fi
+
   AC_MSG_CHECKING([if zgc can be built])
   if (test "x$OPENJDK_TARGET_OS" = "xlinux" && test "x$OPENJDK_TARGET_CPU" = "xx86_64") || \
-     (test "x$OPENJDK_TARGET_OS" = "xlinux" && test "x$OPENJDK_TARGET_CPU" = "xaarch64"); then
+     (test "x$OPENJDK_TARGET_OS" = "xlinux" && test "x$OPENJDK_TARGET_CPU" = "xaarch64") || \
+     (test "x$CAN_BUILD_ZGC_ON_WINDOWS" = "xyes") || \
+     (test "x$OPENJDK_TARGET_OS" = "xmacosx" && test "x$OPENJDK_TARGET_CPU" = "xx86_64"); then
     AC_MSG_RESULT([yes])
   else
     DISABLED_JVM_FEATURES="$DISABLED_JVM_FEATURES zgc"
@@ -490,7 +505,7 @@ AC_DEFUN_ONCE([HOTSPOT_SETUP_JVM_FEATURES],
   fi
 
   # All variants but minimal (and custom) get these features
-  NON_MINIMAL_FEATURES="$NON_MINIMAL_FEATURES cmsgc g1gc parallelgc serialgc epsilongc shenandoahgc jni-check jvmti management nmt services vm-structs zgc"
+  NON_MINIMAL_FEATURES="$NON_MINIMAL_FEATURES g1gc parallelgc serialgc epsilongc shenandoahgc jni-check jvmti management nmt services vm-structs zgc"
 
   # Disable CDS on AIX.
   if test "x$OPENJDK_TARGET_OS" = "xaix"; then

make/autoconf/jdk-options.m4

@@ -599,7 +599,14 @@ AC_DEFUN_ONCE([JDKOPT_ENABLE_DISABLE_GENERATE_CLASSLIST],
     AC_MSG_RESULT([yes, forced])
     ENABLE_GENERATE_CLASSLIST="true"
     if test "x$ENABLE_GENERATE_CLASSLIST_POSSIBLE" = "xfalse"; then
-      AC_MSG_WARN([Generation of classlist might not be possible with JVM Variants $JVM_VARIANTS and enable-cds=$ENABLE_CDS])
+      if test "x$ENABLE_CDS" = "xfalse"; then
+        # In GenerateLinkOptData.gmk, DumpLoadedClassList is used to generate the
+        # classlist file. It never will work in this case since the VM will report
+        # an error for DumpLoadedClassList when CDS is disabled.
+        AC_MSG_ERROR([Generation of classlist is not possible with enable-cds=false])
+      else
+        AC_MSG_WARN([Generation of classlist might not be possible with JVM Variants $JVM_VARIANTS and enable-cds=$ENABLE_CDS])
+      fi
     fi
   elif test "x$enable_generate_classlist" = "xno"; then
     AC_MSG_RESULT([no, forced])

make/autoconf/jdk-version.m4

@@ -162,7 +162,9 @@ AC_DEFUN_ONCE([JDKVER_SETUP_JDK_VERSION_NUMBERS],
     AC_MSG_ERROR([--with-vendor-vm-bug-url must have a value])
   elif [ ! [[ $with_vendor_vm_bug_url =~ ^[[:print:]]*$ ]] ]; then
     AC_MSG_ERROR([--with-vendor-vm-bug-url contains non-printing characters: $with_vendor_vm_bug_url])
-  else
+  elif test "x$with_vendor_vm_bug_url" != x; then
+    # Only set VENDOR_URL_VM_BUG if '--with-vendor-vm-bug-url' was used and is not empty.
+    # Otherwise we will use the value from "version-numbers" included above.
     VENDOR_URL_VM_BUG="$with_vendor_vm_bug_url"
   fi
   AC_SUBST(VENDOR_URL_VM_BUG)

make/autoconf/platform.m4

@@ -558,6 +558,22 @@ AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET],
   PLATFORM_SET_MODULE_TARGET_OS_VALUES
   PLATFORM_SET_RELEASE_FILE_OS_VALUES
   PLATFORM_SETUP_LEGACY_VARS
+  PLATFORM_CHECK_DEPRECATION
+])
+
+AC_DEFUN([PLATFORM_CHECK_DEPRECATION],
+[
+  AC_ARG_ENABLE(deprecated-ports, [AS_HELP_STRING([--enable-deprecated-ports@<:@=yes/no@:>@],
+       [Suppress the error when configuring for a deprecated port @<:@no@:>@])])
+
+  if test "x$OPENJDK_TARGET_OS" = xsolaris || (test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc && test "x$with_jvm_variants" != xzero); then
+    if test "x$enable_deprecated_ports" = "xyes"; then
+      AC_MSG_WARN([The Solaris and SPARC ports are deprecated and may be removed in a future release.])
+    else
+      AC_MSG_ERROR(m4_normalize([The Solaris and SPARC ports are deprecated and may be removed in a
+        future release. Use --enable-deprecated-ports=yes to suppress this error.]))
+    fi
+  fi
 ])
 
 AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION],

make/autoconf/spec.gmk.in

@@ -51,6 +51,9 @@ COMMA:=,
 # What make to use for main processing, after bootstrapping top-level Makefile.
 MAKE := @MAKE@
 
+# Make sure all shell commands are executed with the C locale
+export LC_ALL := C
+
 # The default make arguments
 MAKE_ARGS = $(MAKE_LOG_FLAGS) -r -R -I $(TOPDIR)/make/common SPEC=$(SPEC) \
     MAKE_LOG_FLAGS="$(MAKE_LOG_FLAGS)" $(MAKE_LOG_VARS)
@@ -286,7 +289,7 @@ JVM_FEATURES_custom := @JVM_FEATURES_custom@
 VALID_JVM_FEATURES := @VALID_JVM_FEATURES@
 VALID_JVM_VARIANTS := @VALID_JVM_VARIANTS@
 
-# Control wether Hotspot builds gtest tests
+# Control whether Hotspot builds gtest tests
 BUILD_GTEST := @BUILD_GTEST@
 
 # Allow overriding the default hotspot library path
@@ -373,6 +376,8 @@ ENABLE_LIBFFI_BUNDLING:=@ENABLE_LIBFFI_BUNDLING@
 LIBFFI_LIB_FILE:=@LIBFFI_LIB_FILE@
 GRAALUNIT_LIB := @GRAALUNIT_LIB@
 
+STATIC_LIBS_CFLAGS := @STATIC_LIBS_CFLAGS@
+
 JMH_CORE_JAR := @JMH_CORE_JAR@
 JMH_GENERATOR_JAR := @JMH_GENERATOR_JAR@
 JMH_JOPT_SIMPLE_JAR := @JMH_JOPT_SIMPLE_JAR@
@@ -410,6 +415,9 @@ MACOSX_VERSION_MIN=@MACOSX_VERSION_MIN@
 # The highest allowed version of macosx
 MACOSX_VERSION_MAX=@MACOSX_VERSION_MAX@
 
+# The macosx code signing identity to use
+MACOSX_CODESIGN_IDENTITY=@MACOSX_CODESIGN_IDENTITY@
+
 # Toolchain type: gcc, clang, solstudio, lxc, microsoft...
 TOOLCHAIN_TYPE:=@TOOLCHAIN_TYPE@
 TOOLCHAIN_VERSION := @TOOLCHAIN_VERSION@
@@ -762,6 +770,7 @@ JIB_HOME:=@JIB_HOME@
 XCODEBUILD=@XCODEBUILD@
 DTRACE := @DTRACE@
 FIXPATH:=@FIXPATH@
+ULIMIT:=@ULIMIT@
 
 TAR_TYPE:=@TAR_TYPE@
 TAR_CREATE_EXTRA_PARAM:=@TAR_CREATE_EXTRA_PARAM@
@@ -889,6 +898,10 @@ DOCS_IMAGE_DIR = $(IMAGES_OUTPUTDIR)/$(DOCS_IMAGE_SUBDIR)
 # Output docs directly into image
 DOCS_OUTPUTDIR := $(DOCS_IMAGE_DIR)
 
+# Static libs image
+STATIC_LIBS_IMAGE_SUBDIR := static-libs
+STATIC_LIBS_IMAGE_DIR := $(IMAGES_OUTPUTDIR)/$(STATIC_LIBS_IMAGE_SUBDIR)
+
 # Macosx bundles directory definitions
 JDK_MACOSX_BUNDLE_SUBDIR=jdk-bundle
 JRE_MACOSX_BUNDLE_SUBDIR=jre-bundle
@@ -917,6 +930,7 @@ JDK_SYMBOLS_BUNDLE_NAME := jdk-$(BASE_NAME)_bin$(DEBUG_PART)-symbols.tar.gz
 TEST_DEMOS_BUNDLE_NAME := jdk-$(BASE_NAME)_bin-tests-demos$(DEBUG_PART).tar.gz
 TEST_BUNDLE_NAME := jdk-$(BASE_NAME)_bin-tests$(DEBUG_PART).tar.gz
 DOCS_BUNDLE_NAME := jdk-$(BASE_NAME)_doc-api-spec$(DEBUG_PART).tar.gz
+STATIC_LIBS_BUNDLE_NAME := jdk-$(BASE_NAME)_bin-static-libs$(DEBUG_PART).tar.gz
 JCOV_BUNDLE_NAME := jdk-jcov-$(BASE_NAME)_bin$(DEBUG_PART).$(JDK_BUNDLE_EXTENSION)
 
 JDK_BUNDLE := $(BUNDLES_OUTPUTDIR)/$(JDK_BUNDLE_NAME)

make/autoconf/toolchain.m4

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -286,7 +286,8 @@ AC_DEFUN_ONCE([TOOLCHAIN_DETERMINE_TOOLCHAIN_TYPE],
     $ECHO "$XLCLANG_VERSION_OUTPUT" | $GREP "IBM XL C/C++ for AIX" > /dev/null
     if test $? -eq 0; then
       AC_MSG_NOTICE([xlclang++ output: $XLCLANG_VERSION_OUTPUT])
-      XLC_USES_CLANG=true
+    else
+      AC_MSG_ERROR([xlclang++ version output check failed, output: $XLCLANG_VERSION_OUTPUT])
     fi
   fi
 
@@ -294,21 +295,13 @@ AC_DEFUN_ONCE([TOOLCHAIN_DETERMINE_TOOLCHAIN_TYPE],
   TOOLCHAIN_CC_BINARY_gcc="gcc"
   TOOLCHAIN_CC_BINARY_microsoft="cl$EXE_SUFFIX"
   TOOLCHAIN_CC_BINARY_solstudio="cc"
-  TOOLCHAIN_CC_BINARY_xlc="xlc_r"
+  TOOLCHAIN_CC_BINARY_xlc="xlclang"
 
   TOOLCHAIN_CXX_BINARY_clang="clang++"
   TOOLCHAIN_CXX_BINARY_gcc="g++"
   TOOLCHAIN_CXX_BINARY_microsoft="cl$EXE_SUFFIX"
   TOOLCHAIN_CXX_BINARY_solstudio="CC"
-  TOOLCHAIN_CXX_BINARY_xlc="xlC_r"
-
-  if test "x$OPENJDK_TARGET_OS" = xaix; then
-    if test "x$XLC_USES_CLANG" = xtrue; then
-      AC_MSG_NOTICE([xlclang++ detected, using it])
-      TOOLCHAIN_CC_BINARY_xlc="xlclang"
-      TOOLCHAIN_CXX_BINARY_xlc="xlclang++"
-    fi
-  fi
+  TOOLCHAIN_CXX_BINARY_xlc="xlclang++"
 
   # Use indirect variable referencing
   toolchain_var_name=TOOLCHAIN_DESCRIPTION_$TOOLCHAIN_TYPE
@@ -488,7 +481,7 @@ AC_DEFUN([TOOLCHAIN_EXTRACT_COMPILER_VERSION],
     COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
         $SED -e 's/ *Copyright .*//'`
     COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
-        $SED -e 's/^.* \(@<:@1-9@:>@\.@<:@0-9.@:>@*\)@<:@^0-9.@:>@.*$/\1/'`
+        $SED -e 's/^.* \(@<:@1-9@:>@<:@0-9@:>@*\.@<:@0-9.@:>@*\)@<:@^0-9.@:>@.*$/\1/'`
   elif test  "x$TOOLCHAIN_TYPE" = xclang; then
     # clang --version output typically looks like
     #    Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)

make/autoconf/toolchain_windows.m4

@@ -209,6 +209,8 @@ AC_DEFUN([TOOLCHAIN_FIND_VISUAL_STUDIO_BAT_FILE],
   eval SDK_INSTALL_DIR="\${VS_SDK_INSTALLDIR_${VS_VERSION}}"
   eval VS_ENV_ARGS="\${VS_ENV_ARGS_${VS_VERSION}}"
   eval VS_TOOLSET_SUPPORTED="\${VS_TOOLSET_SUPPORTED_${VS_VERSION}}"
+    
+  VS_ENV_CMD="" 
 
   # When using --with-tools-dir, assume it points to the correct and default
   # version of Visual Studio or that --with-toolchain-version was also set.
@@ -227,8 +229,6 @@ AC_DEFUN([TOOLCHAIN_FIND_VISUAL_STUDIO_BAT_FILE],
     fi
   fi
 
-  VS_ENV_CMD=""
-
   if test "x$VS_COMNTOOLS" != x; then
     TOOLCHAIN_CHECK_POSSIBLE_VISUAL_STUDIO_ROOT([${VS_VERSION}],
         [$VS_COMNTOOLS/../..], [$VS_COMNTOOLS_VAR variable])
@@ -808,7 +808,7 @@ AC_DEFUN([TOOLCHAIN_SETUP_VS_RUNTIME_DLLS],
   if test "x$USE_UCRT" = "xtrue"; then
     AC_MSG_CHECKING([for UCRT DLL dir])
     if test "x$with_ucrt_dll_dir" != x; then
-      if test -z "$(ls -d $with_ucrt_dll_dir/*.dll 2> /dev/null)"; then
+      if test -z "$(ls -d "$with_ucrt_dll_dir/"*.dll 2> /dev/null)"; then
         AC_MSG_RESULT([no])
         AC_MSG_ERROR([Could not find any dlls in $with_ucrt_dll_dir])
       else

make/autoconf/version-numbers

@@ -23,20 +23,21 @@
 # questions.
 #
 
-# Default version numbers to use unless overridden by configure
+# Default version, product, and vendor information to use,
+# unless overridden by configure
 
-DEFAULT_VERSION_FEATURE=14
+DEFAULT_VERSION_FEATURE=15
 DEFAULT_VERSION_INTERIM=0
 DEFAULT_VERSION_UPDATE=0
 DEFAULT_VERSION_PATCH=0
 DEFAULT_VERSION_EXTRA1=0
 DEFAULT_VERSION_EXTRA2=0
 DEFAULT_VERSION_EXTRA3=0
-DEFAULT_VERSION_DATE=2020-03-17
-DEFAULT_VERSION_CLASSFILE_MAJOR=58  # "`$EXPR $DEFAULT_VERSION_FEATURE + 44`"
+DEFAULT_VERSION_DATE=2020-09-15
+DEFAULT_VERSION_CLASSFILE_MAJOR=59  # "`$EXPR $DEFAULT_VERSION_FEATURE + 44`"
 DEFAULT_VERSION_CLASSFILE_MINOR=0
-DEFAULT_ACCEPTABLE_BOOT_VERSIONS="12 13 14"
-DEFAULT_JDK_SOURCE_TARGET_VERSION=14
+DEFAULT_ACCEPTABLE_BOOT_VERSIONS="13 14 15"
+DEFAULT_JDK_SOURCE_TARGET_VERSION=15
 DEFAULT_PROMOTED_VERSION_PRE=ea
 
 LAUNCHER_NAME=openjdk
@@ -47,6 +48,7 @@ COMPANY_NAME=N/A
 HOTSPOT_VM_DISTRO="OpenJDK"
 VENDOR_URL=https://openjdk.java.net/
 VENDOR_URL_BUG=https://bugreport.java.com/bugreport/
+VENDOR_URL_VM_BUG=https://bugreport.java.com/bugreport/crash.jsp
 
 # Might need better names for these
 MACOSX_BUNDLE_NAME_BASE="OpenJDK"

make/common/JavaCompilation.gmk

@@ -122,7 +122,7 @@ define add_file_to_clean
     $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) : $2
 	$$(call LogInfo, Cleaning $$(patsubst $(OUTPUTDIR)/%,%, $$@))
 	$$(call MakeTargetDir)
-	export LC_ALL=C ; ( $(CAT) $$< && $(ECHO) "" ) \
+	( $(CAT) $$< && $(ECHO) "" ) \
 	    | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' \
 	        -e 's/\([^\\]\)!/\1\\!/g' -e 's/^[ 	]*#.*/#/g' \
 	    | $(SED) -f "$(TOPDIR)/make/common/support/unicode2x.sed" \
@@ -222,7 +222,7 @@ define SetupJavaCompilationBody
     ) \
   )
   $$(call MakeDir,$$($1_BIN))
-  # Order src files according to the order of the src dirs. Correct odering is
+  # Order src files according to the order of the src dirs. Correct ordering is
   # needed for correct overriding between different source roots.
   $1_ALL_SRC_RAW := $$(call FindFiles, $$($1_SRC))
   $1_ALL_SRCS := $$($1_EXTRA_FILES) \

make/common/JdkNativeCompilation.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2018, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -47,7 +47,8 @@ FindSrcDirsForComponent += \
       $(TOPDIR)/src/$(strip $1)/$(OPENJDK_TARGET_OS_TYPE)/native/$(strip $2) \
       $(TOPDIR)/src/$(strip $1)/share/native/$(strip $2)))
 
-# Find a library
+# Find a library. Used for declaring dependencies on libraries in different
+# modules.
 # Param 1 - module name
 # Param 2 - library name
 # Param 3 - optional subdir for library
@@ -69,6 +70,12 @@ ifeq ($(GENERATE_COMPILE_COMMANDS_ONLY), true)
   FindLib =
   FindStaticLib =
 endif
+# If building static versions of libraries, make these return empty to avoid
+# declaring dependencies.
+ifeq ($(STATIC_LIBS), true)
+  FindLib =
+  FindStaticLib =
+endif
 
 GetJavaHeaderDir = \
   $(wildcard $(SUPPORT_OUTPUTDIR)/headers/$(strip $1))

make/common/MakeBase.gmk

@@ -564,8 +564,8 @@ endif
 # Param 1 - The path to base the name of the log file / command line file on
 # Param 2 - The command to run
 ExecuteWithLog = \
-  $(call LogCmdlines, Exececuting: [$(strip $2)]) \
-  $(call MakeDir, $(dir $(strip $1))) \
+  $(call LogCmdlines, Executing: [$(strip $2)]) \
+  $(call MakeDir, $(dir $(strip $1)) $(MAKESUPPORT_OUTPUTDIR)/failure-logs) \
   $(call WriteFile, $2, $(strip $1).cmdline) \
   ( $(RM) $(strip $1).log && $(strip $2) > >($(TEE) -a $(strip $1).log) 2> >($(TEE) -a $(strip $1).log >&2) || \
       ( exitcode=$(DOLLAR)? && \

make/common/Modules.gmk

@@ -58,6 +58,7 @@ BOOT_MODULES += \
     java.rmi \
     java.security.sasl \
     java.xml \
+    jdk.incubator.foreign \
     jdk.internal.vm.ci \
     jdk.jfr \
     jdk.management \
@@ -128,7 +129,7 @@ endif
 
 JRE_TOOL_MODULES += \
     jdk.jdwp.agent \
-    jdk.pack \
+    jdk.incubator.jpackage \
     jdk.scripting.nashorn.shell \
     #
 
@@ -149,6 +150,7 @@ DOCS_MODULES += \
     jdk.editpad \
     jdk.hotspot.agent \
     jdk.httpserver \
+    jdk.incubator.jpackage \
     jdk.jartool \
     jdk.javadoc \
     jdk.jcmd \
@@ -161,6 +163,7 @@ DOCS_MODULES += \
     jdk.jsobject \
     jdk.jshell \
     jdk.jstatd \
+    jdk.incubator.foreign \
     jdk.localedata \
     jdk.management \
     jdk.management.agent \
@@ -168,7 +171,6 @@ DOCS_MODULES += \
     jdk.naming.dns \
     jdk.naming.rmi \
     jdk.net \
-    jdk.pack \
     jdk.rmic \
     jdk.scripting.nashorn \
     jdk.sctp \
@@ -198,6 +200,21 @@ HOTSPOT_MODULES := \
     jdk.internal.vm.compiler.management \
     #
 
+# The native dynamic libraries in these modules will also get built into static
+# libraries for consumption by downstream projects that need to statically link
+# the JDK libraries. Those static libraries are not part of the main JDK
+# distribution. 
+STATIC_LIBS_MODULES := \
+    java.base \
+    jdk.crypto.ec \
+    jdk.security.auth \
+    java.prefs \
+    java.security.jgss \
+    java.smartcardio \
+    jdk.crypto.cryptoki \
+    jdk.net \
+    #
+
 ################################################################################
 # Some platforms don't have the serviceability agent
 
@@ -227,6 +244,13 @@ ifeq ($(ENABLE_AOT), false)
   MODULES_FILTER += jdk.aot
 endif
 
+################################################################################
+# jpackage is only on windows, macosx, and linux
+
+ifeq ($(call isTargetOs, windows macosx linux), false)
+  MODULES_FILTER += jdk.incubator.jpackage
+endif
+
 ################################################################################
 # Module list macros
 

make/common/NativeCompilation.gmk

@@ -397,6 +397,7 @@ endef
 #   ARFLAGS the archiver flags to be used
 #   OBJECT_DIR the directory where we store the object files
 #   OUTPUT_DIR the directory where the resulting binary is put
+#   SYMBOLS_DIR the directory where the debug symbols are put, defaults to OUTPUT_DIR
 #   INCLUDES only pick source from these directories
 #   EXCLUDES do not pick source from these directories
 #   INCLUDE_FILES only compile exactly these files!
@@ -453,6 +454,28 @@ define SetupNativeCompilationBody
     endif
   endif
 
+  $$(call SetIfEmpty, $1_COMPILE_WITH_DEBUG_SYMBOLS, $$(COMPILE_WITH_DEBUG_SYMBOLS))
+
+  # STATIC_LIBS is set from Main.gmk when building static versions of certain
+  # native libraries.
+  ifeq ($(STATIC_LIBS), true)
+    $1_TYPE := STATIC_LIBRARY
+    # The static versions need to be redirected to different output dirs, both
+    # to not interfere with the main build as well as to not end up inside the
+    # jmods.
+    $1_OBJECT_DIR := $$($1_OBJECT_DIR)/static
+    $1_OUTPUT_DIR := $$($1_OBJECT_DIR)
+    # For release builds where debug symbols are configured to be moved to
+    # separate debuginfo files, disable debug symbols for static libs instead.
+    # We don't currently support this configuration and we don't want symbol
+    # information in release builds unless explicitly asked to provide it.
+    ifeq ($(DEBUG_LEVEL), release)
+      ifeq ($(COPY_DEBUG_SYMBOLS), true)
+        $1_COMPILE_WITH_DEBUG_SYMBOLS := false
+      endif
+    endif
+  endif
+
   ifeq ($$($1_TYPE), EXECUTABLE)
     $1_PREFIX :=
     ifeq ($$($1_SUFFIX), )
@@ -511,8 +534,6 @@ define SetupNativeCompilationBody
   $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_CFLAGS))
   $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_LDFLAGS))
 
-  # Make sure the dirs exist.
-  $$(call MakeDir, $$($1_OBJECT_DIR) $$($1_OUTPUT_DIR))
   $$(foreach d, $$($1_SRC), $$(if $$(wildcard $$d), , \
       $$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))
 
@@ -592,6 +613,9 @@ define SetupNativeCompilationBody
     $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
     $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)_release)
   endif
+  ifeq ($(STATIC_LIBS), true)
+    $1_EXTRA_CFLAGS += $$(STATIC_LIBS_CFLAGS)
+  endif
 
   # Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS.
   $1_EXTRA_CXXFLAGS := $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS))
@@ -605,6 +629,9 @@ define SetupNativeCompilationBody
     $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release)
     $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
   endif
+  ifeq ($(STATIC_LIBS), true)
+    $1_EXTRA_CXXFLAGS += $$(STATIC_LIB_CFLAGS)
+  endif
 
   # If no C++ flags are explicitly set, default to using the C flags.
   # After that, we can set additional C++ flags that should not interfere
@@ -616,7 +643,7 @@ define SetupNativeCompilationBody
     $1_EXTRA_CXXFLAGS := $$($1_EXTRA_CFLAGS)
   endif
 
-  ifeq ($(COMPILE_WITH_DEBUG_SYMBOLS), true)
+  ifeq ($$($1_COMPILE_WITH_DEBUG_SYMBOLS), true)
     $1_EXTRA_CFLAGS += $$(CFLAGS_DEBUG_SYMBOLS)
     $1_EXTRA_CXXFLAGS += $$(CFLAGS_DEBUG_SYMBOLS)
     $1_EXTRA_ASFLAGS += $$(ASFLAGS_DEBUG_SYMBOLS)
@@ -760,34 +787,6 @@ define SetupNativeCompilationBody
     endif
   endif
 
-  # Create a rule to collect all the individual make dependency files into a
-  # single makefile.
-  $1_DEPS_FILE := $$($1_OBJECT_DIR)/$1.d
-
-  $$($1_DEPS_FILE): $$($1_ALL_OBJS)
-	$(RM) $$@
-        # CD into dir to reduce risk of hitting command length limits, which
-        # could otherwise happen if TOPDIR is a very long path.
-	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d > $$@.tmp
-	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d.targets | $(SORT) -u >> $$@.tmp
-        # After generating the file, which happens after all objects have been
-        # compiled, copy it to .old extension. On the next make invocation, this
-        # .old file will be included by make.
-	$(CP) $$@.tmp $$@.old
-	$(MV) $$@.tmp $$@
-
-  $1 += $$($1_DEPS_FILE)
-
-  # The include must be on the .old file, which represents the state from the
-  # previous invocation of make. The file being included must not have a rule
-  # defined for it as otherwise make will think it has to run the rule before
-  # being able to include the file, which would be wrong since we specifically
-  # need the file as it was generated by a previous make invocation.
-  ifneq ($$(wildcard $$($1_DEPS_FILE).old), )
-    $1_DEPS_FILE_LOADED := true
-    -include $$($1_DEPS_FILE).old
-  endif
-
   # Now call SetupCompileNativeFile for each source file we are going to compile.
   $$(foreach file, $$($1_SRCS), \
       $$(eval $$(call SetupCompileNativeFile, $1_$$(notdir $$(file)),\
@@ -850,6 +849,34 @@ define SetupNativeCompilationBody
     endif
   endif
 
+  # Create a rule to collect all the individual make dependency files into a
+  # single makefile.
+  $1_DEPS_FILE := $$($1_OBJECT_DIR)/$1.d
+
+  $$($1_DEPS_FILE): $$($1_ALL_OBJS) $$($1_RES)
+	$(RM) $$@
+        # CD into dir to reduce risk of hitting command length limits, which
+        # could otherwise happen if TOPDIR is a very long path.
+	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d > $$@.tmp
+	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d.targets | $(SORT) -u >> $$@.tmp
+        # After generating the file, which happens after all objects have been
+        # compiled, copy it to .old extension. On the next make invocation, this
+        # .old file will be included by make.
+	$(CP) $$@.tmp $$@.old
+	$(MV) $$@.tmp $$@
+
+  $1 += $$($1_DEPS_FILE)
+
+  # The include must be on the .old file, which represents the state from the
+  # previous invocation of make. The file being included must not have a rule
+  # defined for it as otherwise make will think it has to run the rule before
+  # being able to include the file, which would be wrong since we specifically
+  # need the file as it was generated by a previous make invocation.
+  ifneq ($$(wildcard $$($1_DEPS_FILE).old), )
+    $1_DEPS_FILE_LOADED := true
+    -include $$($1_DEPS_FILE).old
+  endif
+
   ifneq ($(DISABLE_MAPFILES), true)
     $1_REAL_MAPFILE := $$($1_MAPFILE)
     ifeq ($(call isTargetOs, windows), false)
@@ -883,30 +910,31 @@ define SetupNativeCompilationBody
 
   ifeq ($$($1_COPY_DEBUG_SYMBOLS), true)
     ifneq ($$($1_DEBUG_SYMBOLS), false)
+      $$(call SetIfEmpty, $1_SYMBOLS_DIR, $$($1_OUTPUT_DIR))
       # Only copy debug symbols for dynamic libraries and programs.
       ifneq ($$($1_TYPE), STATIC_LIBRARY)
         # Generate debuginfo files.
         ifeq ($(call isTargetOs, windows), true)
-          $1_EXTRA_LDFLAGS += -debug "-pdb:$$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).pdb" \
-              "-map:$$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).map"
-          $1_DEBUGINFO_FILES := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).pdb \
-              $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).map
+          $1_EXTRA_LDFLAGS += -debug "-pdb:$$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).pdb" \
+              "-map:$$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).map"
+          $1_DEBUGINFO_FILES := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).pdb \
+              $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).map
 
         else ifeq ($(call isTargetOs, linux solaris), true)
-          $1_DEBUGINFO_FILES := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).debuginfo
+          $1_DEBUGINFO_FILES := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).debuginfo
           # Setup the command line creating debuginfo files, to be run after linking.
           # It cannot be run separately since it updates the original target file
           $1_CREATE_DEBUGINFO_CMDS := \
               $$($1_OBJCOPY) --only-keep-debug $$($1_TARGET) $$($1_DEBUGINFO_FILES) $$(NEWLINE) \
-              $(CD) $$($1_OUTPUT_DIR) && \
+              $(CD) $$($1_SYMBOLS_DIR) && \
                   $$($1_OBJCOPY) --add-gnu-debuglink=$$($1_DEBUGINFO_FILES) $$($1_TARGET)
 
         else ifeq ($(call isTargetOs, macosx), true)
           $1_DEBUGINFO_FILES := \
-              $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM/Contents/Info.plist \
-              $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM/Contents/Resources/DWARF/$$($1_BASENAME)
+              $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM/Contents/Info.plist \
+              $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM/Contents/Resources/DWARF/$$($1_BASENAME)
           $1_CREATE_DEBUGINFO_CMDS := \
-              $(DSYMUTIL) --out $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM $$($1_TARGET)
+              $(DSYMUTIL) --out $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM $$($1_TARGET)
         endif
 
         # Since the link rule creates more than one file that we want to track,
@@ -928,14 +956,14 @@ define SetupNativeCompilationBody
         $1 += $$($1_DEBUGINFO_FILES)
 
         ifeq ($$($1_ZIP_EXTERNAL_DEBUG_SYMBOLS), true)
-          $1_DEBUGINFO_ZIP := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).diz
+          $1_DEBUGINFO_ZIP := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).diz
           $1 += $$($1_DEBUGINFO_ZIP)
 
           # The dependency on TARGET is needed for debuginfo files
           # to be rebuilt properly.
           $$($1_DEBUGINFO_ZIP): $$($1_DEBUGINFO_FILES) $$($1_TARGET)
-		$(CD) $$($1_OUTPUT_DIR) && \
-		    $(ZIPEXE) -q -r $$@ $$(subst $$($1_OUTPUT_DIR)/,, $$($1_DEBUGINFO_FILES))
+		$(CD) $$($1_SYMBOLS_DIR) && \
+		    $(ZIPEXE) -q -r $$@ $$(subst $$($1_SYMBOLS_DIR)/,, $$($1_DEBUGINFO_FILES))
 
         endif
        endif # !STATIC_LIBRARY
@@ -971,6 +999,7 @@ define SetupNativeCompilationBody
 
     $$($1_TARGET): $$($1_TARGET_DEPS)
 	$$(call LogInfo, Building static library $$($1_BASENAME))
+	$$(call MakeDir, $$($1_OUTPUT_DIR) $$($1_SYMBOLS_DIR))
 	$$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \
 	    $$($1_AR) $$($1_ARFLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_ALL_OBJS) \
 	        $$($1_RES))
@@ -1019,7 +1048,7 @@ define SetupNativeCompilationBody
 
     $1_VARDEPS := $$($1_LD) $$($1_SYSROOT_LDFLAGS) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) \
         $$(GLOBAL_LIBS) $$($1_LIBS) $$($1_EXTRA_LIBS) $$($1_MT) \
-        $$($1_CODESIGN) $$($1_CREATE_DEBUGINFO_CMDS) $$($1_MANIFEST_VERSION) \
+        $$($1_CREATE_DEBUGINFO_CMDS) $$($1_MANIFEST_VERSION) \
         $$($1_STRIP_CMD)
     $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
         $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)
@@ -1072,7 +1101,9 @@ define SetupNativeCompilationBody
                 # Keep as much as possible on one execution line for best performance
                 # on Windows
 		$$(call LogInfo, Linking $$($1_BASENAME))
+		$$(call MakeDir, $$($1_OUTPUT_DIR) $$($1_SYMBOLS_DIR))
                 ifeq ($(call isTargetOs, windows), true)
+
 		  $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \
 		      $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $$($1_SYSROOT_LDFLAGS) \
 		          $(LD_OUT_OPTION)$$($1_TARGET) $$($1_LD_OBJ_ARG) $$($1_RES) $$(GLOBAL_LIBS) \
@@ -1098,9 +1129,8 @@ define SetupNativeCompilationBody
                 # This only works if the openjdk_codesign identity is present on the system. Let
                 # silently fail otherwise.
                 ifneq ($(CODESIGN), )
-                  ifneq ($$($1_CODESIGN), )
-		    $(CODESIGN) -s openjdk_codesign $$@
-                  endif
+		  $(CODESIGN) -s "$(MACOSX_CODESIGN_IDENTITY)" --timestamp --options runtime \
+		  --entitlements $(TOPDIR)/make/data/macosxsigning/entitlements.plist $$@
                 endif
   endif
 

make/common/ProcessMarkdown.gmk

@@ -1,4 +1,4 @@
-# Copyright (c) 2017, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2017, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/common/RMICompilation.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/common/SetupJavaCompilers.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/common/TestFilesCompilation.gmk

@@ -62,7 +62,7 @@ define SetupTestFilesCompilationBody
     $1_OUTPUT_SUBDIR := lib
     $1_BASE_CFLAGS := $(CFLAGS_JDKLIB)
     $1_BASE_CXXFLAGS := $(CXXFLAGS_JDKLIB)
-    $1_LDFLAGS := $(LDFLAGS_JDKLIB) $(call SET_SHARED_LIBRARY_ORIGIN)
+    $1_LDFLAGS := $(LDFLAGS_JDKLIB) $$(call SET_SHARED_LIBRARY_ORIGIN)
     $1_COMPILATION_TYPE := LIBRARY
   else ifeq ($$($1_TYPE), PROGRAM)
     $1_PREFIX = exe
@@ -98,7 +98,7 @@ define SetupTestFilesCompilationBody
         DISABLED_WARNINGS_gcc := format undef unused-function unused-value, \
         DISABLED_WARNINGS_clang := undef format-nonliteral \
             missing-field-initializers sometimes-uninitialized, \
-        DISABLED_WARNINGS_CXX_solstudio := wvarhidenmem, \
+        DISABLED_WARNINGS_CXX_solstudio := wvarhidenmem doubunder, \
         LIBS := $$($1_LIBS_$$(name)), \
         TOOLCHAIN := $(if $$(filter %.cpp, $$(file)), TOOLCHAIN_LINK_CXX, TOOLCHAIN_DEFAULT), \
         OPTIMIZATION := $$(if $$($1_OPTIMIZATION_$$(name)),$$($1_OPTIMIZATION_$$(name)),LOW), \

make/conf/jib-profiles.js

@@ -247,7 +247,7 @@ var getJibProfilesCommon = function (input, data) {
     // These are the base setttings for all the main build profiles.
     common.main_profile_base = {
         dependencies: ["boot_jdk", "gnumake", "jtreg", "jib", "autoconf", "jmh", "jcov"],
-        default_make_targets: ["product-bundles", "test-bundles"],
+        default_make_targets: ["product-bundles", "test-bundles", "static-libs-bundles"],
         configure_args: concat(["--enable-jtreg-failure-handler"],
             "--with-exclude-translations=de,es,fr,it,ko,pt_BR,sv,ca,tr,cs,sk,ja_JP_A,ja_JP_HA,ja_JP_HI,ja_JP_I,zh_TW,zh_HK",
             "--disable-manpages",
@@ -320,6 +320,14 @@ var getJibProfilesCommon = function (input, data) {
                     subdir: jdk_subdir,
                     exploded: "images/jdk"
                 },
+                static_libs: {
+                    local: "bundles/\\(jdk.*bin-static-libs.tar.gz\\)",
+                    remote: [
+                        "bundles/" + pf + "/jdk-" + data.version + "_" + pf + "_bin-static-libs.tar.gz",
+                        "bundles/" + pf + "/\\1"
+                    ],
+                    subdir: jdk_subdir,
+                },
             }
         };
     };
@@ -361,11 +369,19 @@ var getJibProfilesCommon = function (input, data) {
                     subdir: jdk_subdir,
                     exploded: "images/jdk"
                 },
+                static_libs: {
+                    local: "bundles/\\(jdk.*bin-static-libs-debug.tar.gz\\)",
+                    remote: [
+                        "bundles/" + pf + "/jdk-" + data.version + "_" + pf + "_bin-static-libs-debug.tar.gz",
+                        "bundles/" + pf + "/\\1"
+                    ],
+                    subdir: jdk_subdir,
+                },
             }
         };
     };
 
-    common.boot_jdk_version = "12";
+    common.boot_jdk_version = "13";
     common.boot_jdk_build_number = "33";
     common.boot_jdk_home = input.get("boot_jdk", "install_path") + "/jdk-"
         + common.boot_jdk_version
@@ -418,7 +434,7 @@ var getJibProfilesProfiles = function (input, common, data) {
             target_cpu: "x64",
             dependencies: ["devkit", "cups"],
             configure_args: concat(common.configure_args_64bit,
-                "--with-zlib=system", "--enable-dtrace"),
+                "--with-zlib=system", "--enable-dtrace", "--enable-deprecated-ports=yes"),
         },
 
         "solaris-sparcv9": {
@@ -426,7 +442,7 @@ var getJibProfilesProfiles = function (input, common, data) {
             target_cpu: "sparcv9",
             dependencies: ["devkit", "cups"],
             configure_args: concat(common.configure_args_64bit,
-                "--with-zlib=system", "--enable-dtrace"),
+                "--with-zlib=system", "--enable-dtrace", "--enable-deprecated-ports=yes"),
         },
 
         "windows-x64": {
@@ -839,13 +855,17 @@ var getJibProfilesProfiles = function (input, common, data) {
     if (testedProfile == null) {
         testedProfile = input.build_os + "-" + input.build_cpu;
     }
-    var testedProfileJDK = testedProfile + ".jdk";
-    var testedProfileTest = ""
-    if (testedProfile.endsWith("-jcov")) {
-        testedProfileTest = testedProfile.substring(0, testedProfile.length - "-jcov".length) + ".test";
+    var testedProfileJdk = testedProfile + ".jdk";
+    // Make it possible to use the test image from a different profile
+    var testImageProfile;
+    if (input.testImageProfile != null) {
+        testImageProfile = input.testImageProfile;
+    } else if (testedProfile.endsWith("-jcov")) {
+        testImageProfile = testedProfile.substring(0, testedProfile.length - "-jcov".length);
     } else {
-        testedProfileTest = testedProfile + ".test";
+        testImageProfile = testedProfile;
     }
+    var testedProfileTest = testImageProfile + ".test"
     var testOnlyMake = [ "run-test-prebuilt", "LOG_CMDLINES=true", "JTREG_VERBOSE=fail,error,time" ];
     if (testedProfile.endsWith("-gcov")) {
         testOnlyMake = concat(testOnlyMake, "GCOV_ENABLED=true")
@@ -855,14 +875,14 @@ var getJibProfilesProfiles = function (input, common, data) {
             target_os: input.build_os,
             target_cpu: input.build_cpu,
             dependencies: [
-                "jtreg", "gnumake", "boot_jdk", "devkit", "jib", "jcov", testedProfileJDK,
+                "jtreg", "gnumake", "boot_jdk", "devkit", "jib", "jcov", testedProfileJdk,
                 testedProfileTest
             ],
             src: "src.conf",
             make_args: testOnlyMake,
             environment: {
                 "BOOT_JDK": common.boot_jdk_home,
-                "JDK_IMAGE_DIR": input.get(testedProfileJDK, "home_path"),
+                "JDK_IMAGE_DIR": input.get(testedProfileJdk, "home_path"),
                 "TEST_IMAGE_DIR": input.get(testedProfileTest, "home_path")
             },
             labels: "test"
@@ -871,10 +891,10 @@ var getJibProfilesProfiles = function (input, common, data) {
 
     // If actually running the run-test-prebuilt profile, verify that the input
     // variable is valid and if so, add the appropriate target_* values from
-    // the tested profile.
+    // the tested profile. Use testImageProfile value as backup.
     if (input.profile == "run-test-prebuilt") {
-        if (profiles[testedProfile] == null) {
-            error("testedProfile is not defined: " + testedProfile);
+        if (profiles[testedProfile] == null && profiles[testImageProfile] == null) {
+            error("testedProfile is not defined: " + testedProfile + " " + testImageProfile);
         }
     }
     if (profiles[testedProfile] != null) {
@@ -882,6 +902,11 @@ var getJibProfilesProfiles = function (input, common, data) {
             = profiles[testedProfile]["target_os"];
         testOnlyProfilesPrebuilt["run-test-prebuilt"]["target_cpu"]
             = profiles[testedProfile]["target_cpu"];
+    } else if (profiles[testImageProfile] != null) {
+        testOnlyProfilesPrebuilt["run-test-prebuilt"]["target_os"]
+            = profiles[testImageProfile]["target_os"];
+        testOnlyProfilesPrebuilt["run-test-prebuilt"]["target_cpu"]
+            = profiles[testImageProfile]["target_cpu"];
     }
     profiles = concatObjects(profiles, testOnlyProfilesPrebuilt);
 
@@ -944,11 +969,11 @@ var getJibProfilesProfiles = function (input, common, data) {
 var getJibProfilesDependencies = function (input, common) {
 
     var devkit_platform_revisions = {
-        linux_x64: "gcc8.2.0-OL6.4+1.0",
+        linux_x64: "gcc8.3.0-OL6.4+1.0",
         macosx_x64: "Xcode10.1-MacOSX10.14+1.0",
         solaris_x64: "SS12u4-Solaris11u1+1.0",
         solaris_sparcv9: "SS12u6-Solaris11u3+1.0",
-        windows_x64: "VS2017-15.9.6+1.0",
+        windows_x64: "VS2017-15.9.16+1.0",
         linux_aarch64: "gcc8.2.0-Fedora27+1.0",
         linux_arm: "gcc8.2.0-Fedora27+1.0",
         linux_ppc64le: "gcc8.2.0-Fedora27+1.0",
@@ -1018,7 +1043,7 @@ var getJibProfilesDependencies = function (input, common) {
         jtreg: {
             server: "javare",
             revision: "4.2",
-            build_number: "b14",
+            build_number: "b16",
             checksum_file: "MD5_VALUES",
             file: "jtreg_bin-4.2.zip",
             environment_name: "JT_HOME",
@@ -1346,3 +1371,8 @@ var isWsl = function (input) {
              || (input.build_os == "linux"
                  && java.lang.System.getProperty("os.version").contains("Microsoft")));
 }
+
+var error = function (s) {
+    java.lang.System.err.println("[ERROR] " + s);
+    exit(1);
+};

make/copy/Copy-jdk.crypto.cryptoki.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/copy/Copy-jdk.crypto.ucrypto.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2014, 2019, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it

make/data/cacerts/amazonrootca1

@@ -0,0 +1,27 @@
+Owner: CN=Amazon Root CA 1, O=Amazon, C=US
+Issuer: CN=Amazon Root CA 1, O=Amazon, C=US
+Serial number: 66c9fcf99bf8c0a39e2f0788a43e696365bca
+Valid from: Tue May 26 00:00:00 GMT 2015 until: Sun Jan 17 00:00:00 GMT 2038
+Signature algorithm name: SHA256withRSA
+Subject Public Key Algorithm: 2048-bit RSA key
+Version: 3
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

make/data/cacerts/amazonrootca2

@@ -0,0 +1,38 @@
+Owner: CN=Amazon Root CA 2, O=Amazon, C=US
+Issuer: CN=Amazon Root CA 2, O=Amazon, C=US
+Serial number: 66c9fd29635869f0a0fe58678f85b26bb8a37
+Valid from: Tue May 26 00:00:00 GMT 2015 until: Sat May 26 00:00:00 GMT 2040
+Signature algorithm name: SHA384withRSA
+Subject Public Key Algorithm: 4096-bit RSA key
+Version: 3
+-----BEGIN CERTIFICATE-----
+MIIFQTCCAymgAwIBAgITBmyf0pY1hp8KD+WGePhbJruKNzANBgkqhkiG9w0BAQwF
+ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6
+b24gUm9vdCBDQSAyMB4XDTE1MDUyNjAwMDAwMFoXDTQwMDUyNjAwMDAwMFowOTEL
+MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv
+b3QgQ0EgMjCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoCggIBAK2Wny2cSkxK
+gXlRmeyKy2tgURO8TW0G/LAIjd0ZEGrHJgw12MBvIITplLGbhQPDW9tK6Mj4kHbZ
+W0/jTOgGNk3Mmqw9DJArktQGGWCsN0R5hYGCrVo34A3MnaZMUnbqQ523BNFQ9lXg
+1dKmSYXpN+nKfq5clU1Imj+uIFptiJXZNLhSGkOQsL9sBbm2eLfq0OQ6PBJTYv9K
+8nu+NQWpEjTj82R0Yiw9AElaKP4yRLuH3WUnAnE72kr3H9rN9yFVkE8P7K6C4Z9r
+2UXTu/Bfh+08LDmG2j/e7HJV63mjrdvdfLC6HM783k81ds8P+HgfajZRRidhW+me
+z/CiVX18JYpvL7TFz4QuK/0NURBs+18bvBt+xa47mAExkv8LV/SasrlX6avvDXbR
+8O70zoan4G7ptGmh32n2M8ZpLpcTnqWHsFcQgTfJU7O7f/aS0ZzQGPSSbtqDT6Zj
+mUyl+17vIWR6IF9sZIUVyzfpYgwLKhbcAS4y2j5L9Z469hdAlO+ekQiG+r5jqFoz
+7Mt0Q5X5bGlSNscpb/xVA1wf+5+9R+vnSUeVC06JIglJ4PVhHvG/LopyboBZ/1c6
++XUyo05f7O0oYtlNc/LMgRdg7c3r3NunysV+Ar3yVAhU/bQtCSwXVEqY0VThUWcI
+0u1ufm8/0i2BWSlmy5A5lREedCf+3euvAgMBAAGjQjBAMA8GA1UdEwEB/wQFMAMB
+Af8wDgYDVR0PAQH/BAQDAgGGMB0GA1UdDgQWBBSwDPBMMPQFWAJI/TPlUq9LhONm
+UjANBgkqhkiG9w0BAQwFAAOCAgEAqqiAjw54o+Ci1M3m9Zh6O+oAA7CXDpO8Wqj2
+LIxyh6mx/H9z/WNxeKWHWc8w4Q0QshNabYL1auaAn6AFC2jkR2vHat+2/XcycuUY
++gn0oJMsXdKMdYV2ZZAMA3m3MSNjrXiDCYZohMr/+c8mmpJ5581LxedhpxfL86kS
+k5Nrp+gvU5LEYFiwzAJRGFuFjWJZY7attN6a+yb3ACfAXVU3dJnJUH/jWS5E4ywl
+7uxMMne0nxrpS10gxdr9HIcWxkPo1LsmmkVwXqkLN1PiRnsn/eBG8om3zEK2yygm
+btmlyTrIQRNg91CMFa6ybRoVGld45pIq2WWQgj9sAq+uEjonljYE1x2igGOpm/Hl
+urR8FLBOybEfdF849lHqm/osohHUqS0nGkWxr7JOcQ3AWEbWaQbLU8uz/mtBzUF+
+fUwPfHJ5elnNXkoOrJupmHN5fLT0zLm4BwyydFy4x2+IoZCn9Kr5v2c69BoVYh63
+n749sSmvZ6ES8lgQGVMDMBu4Gon2nL2XA46jCfMdiyHxtN/kHNGfZQIG6lzWE7OE
+76KlXIx3KadowGuuQNKotOrN8I1LOJwZmhsoVLiJkO/KdYE+HvJkJMcYr07/R54H
+9jVlpNMKVv/1F2Rs76giJUmTtt8AF9pYfl3uxRuw0dFfIRDH+fO6AgonB8Xx1sfT
+4PsJYGw=
+-----END CERTIFICATE-----

make/data/cacerts/amazonrootca3

@@ -0,0 +1,19 @@
+Owner: CN=Amazon Root CA 3, O=Amazon, C=US
+Issuer: CN=Amazon Root CA 3, O=Amazon, C=US
+Serial number: 66c9fd5749736663f3b0b9ad9e89e7603f24a
+Valid from: Tue May 26 00:00:00 GMT 2015 until: Sat May 26 00:00:00 GMT 2040
+Signature algorithm name: SHA256withECDSA
+Subject Public Key Algorithm: 256-bit EC key
+Version: 3
+-----BEGIN CERTIFICATE-----
+MIIBtjCCAVugAwIBAgITBmyf1XSXNmY/Owua2eiedgPySjAKBggqhkjOPQQDAjA5
+MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6b24g
+Um9vdCBDQSAzMB4XDTE1MDUyNjAwMDAwMFoXDTQwMDUyNjAwMDAwMFowOTELMAkG
+A1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJvb3Qg
+Q0EgMzBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABCmXp8ZBf8ANm+gBG1bG8lKl
+ui2yEujSLtf6ycXYqm0fc4E7O5hrOXwzpcVOho6AF2hiRVd9RFgdszflZwjrZt6j
+QjBAMA8GA1UdEwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgGGMB0GA1UdDgQWBBSr
+ttvXBp43rDCGB5Fwx5zEGbF4wDAKBggqhkjOPQQDAgNJADBGAiEA4IWSoxe3jfkr
+BqWTrBqYaGFy+uGh0PsceGCmQ5nFuMQCIQCcAu/xlJyzlvnrxir4tiz+OpAUFteM
+YyRIHN8wfdVoOw==
+-----END CERTIFICATE-----

make/data/cacerts/amazonrootca4

@@ -0,0 +1,20 @@
+Owner: CN=Amazon Root CA 4, O=Amazon, C=US
+Issuer: CN=Amazon Root CA 4, O=Amazon, C=US
+Serial number: 66c9fd7c1bb104c2943e5717b7b2cc81ac10e
+Valid from: Tue May 26 00:00:00 GMT 2015 until: Sat May 26 00:00:00 GMT 2040
+Signature algorithm name: SHA384withECDSA
+Subject Public Key Algorithm: 384-bit EC key
+Version: 3
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

make/data/cacerts/luxtrustglobalroot2ca

@@ -0,0 +1,40 @@
+Owner: CN=LuxTrust Global Root 2, O=LuxTrust S.A., C=LU
+Issuer: CN=LuxTrust Global Root 2, O=LuxTrust S.A., C=LU
+Serial number: a7ea6df4b449eda6a24859ee6b815d3167fbbb1
+Valid from: Thu Mar 05 13:21:57 GMT 2015 until: Mon Mar 05 13:21:57 GMT 2035
+Signature algorithm name: SHA256withRSA
+Subject Public Key Algorithm: 4096-bit RSA key
+Version: 3
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

make/data/characterdata/CharacterData00.java.template

@@ -115,13 +115,14 @@ class CharacterData00 extends CharacterData {
     }
 
     boolean isUnicodeIdentifierStart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskIdentifierInfo) == $$valueUnicodeStart);
+        return (getPropertiesEx(ch) & $$maskIDStart) != 0 ||
+               ch == 0x2E2F;
     }
 
     boolean isUnicodeIdentifierPart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskUnicodePart) != 0);
+        return (getPropertiesEx(ch) & $$maskIDContinue) != 0 ||
+               isIdentifierIgnorable(ch) ||
+               ch == 0x2E2F;
     }
 
     boolean isIdentifierIgnorable(int ch) {

make/data/characterdata/CharacterData01.java.template

@@ -114,13 +114,14 @@ class CharacterData01 extends CharacterData {
     }
 
     boolean isUnicodeIdentifierStart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskIdentifierInfo) == $$valueUnicodeStart);
+        return (getPropertiesEx(ch) & $$maskIDStart) != 0 ||
+               ch == 0x2E2F;
     }
 
     boolean isUnicodeIdentifierPart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskUnicodePart) != 0);
+        return (getPropertiesEx(ch) & $$maskIDContinue) != 0 ||
+               isIdentifierIgnorable(ch) ||
+               ch == 0x2E2F;
     }
 
     boolean isIdentifierIgnorable(int ch) {

make/data/characterdata/CharacterData02.java.template

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2003, 2018, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2003, 2019, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -113,13 +113,14 @@ class CharacterData02 extends CharacterData {
     }
 
     boolean isUnicodeIdentifierStart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskIdentifierInfo) == $$valueUnicodeStart);
+        return (getPropertiesEx(ch) & $$maskIDStart) != 0 ||
+               ch == 0x2E2F;
     }
 
     boolean isUnicodeIdentifierPart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskUnicodePart) != 0);
+        return (getPropertiesEx(ch) & $$maskIDContinue) != 0 ||
+               isIdentifierIgnorable(ch) ||
+               ch == 0x2E2F;
     }
 
     boolean isIdentifierIgnorable(int ch) {

make/data/characterdata/CharacterData0E.java.template

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2003, 2018, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2003, 2019, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -113,15 +113,16 @@ class CharacterData0E extends CharacterData {
     }
 
     boolean isUnicodeIdentifierStart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskIdentifierInfo) == $$valueUnicodeStart);
+        return (getPropertiesEx(ch) & $$maskIDStart) != 0 ||
+               ch == 0x2E2F;
     }
 
     boolean isUnicodeIdentifierPart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskUnicodePart) != 0);
+        return (getPropertiesEx(ch) & $$maskIDContinue) != 0 ||
+               isIdentifierIgnorable(ch) ||
+               ch == 0x2E2F;
     }
-
+    
     boolean isIdentifierIgnorable(int ch) {
         int props = getProperties(ch);
         return ((props & $$maskIdentifierInfo) == $$valueIgnorable);

make/data/characterdata/CharacterDataLatin1.java.template

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2002, 2018, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2002, 2019, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -133,13 +133,14 @@ class CharacterDataLatin1 extends CharacterData {
     }
 
     boolean isUnicodeIdentifierStart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskIdentifierInfo) == $$valueUnicodeStart);
+        return (getPropertiesEx(ch) & $$maskIDStart) != 0 ||
+               ch == 0x2E2F;
     }
 
     boolean isUnicodeIdentifierPart(int ch) {
-        int props = getProperties(ch);
-        return ((props & $$maskUnicodePart) != 0);
+        return (getPropertiesEx(ch) & $$maskIDContinue) != 0 ||
+               isIdentifierIgnorable(ch) ||
+               ch == 0x2E2F;
     }
 
     boolean isIdentifierIgnorable(int ch) {

make/data/charsetmapping/SingleByte-X.java.template

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008, 2013, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2008, 2019, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -48,7 +48,7 @@ public class $NAME_CLZ$ extends Charset implements HistoricallyNamedCharset
     }
 
     public CharsetDecoder newDecoder() {
-        return new SingleByte.Decoder(this, b2c, $ASCIICOMPATIBLE$);
+        return new SingleByte.Decoder(this, b2c, $ASCIICOMPATIBLE$, $LATIN1DECODABLE$);
     }
 
     public CharsetEncoder newEncoder() {

make/data/charsetmapping/charsets

@@ -592,9 +592,6 @@ charset x-mswin-936 MS936
     alias   ms936                # JDK historical
     alias   ms_936 // IANA aliases
 
-# The definition of this charset may be overridden by the init method,
-# below, if the sun.nio.cs.map property is defined.
-# 
 charset Shift_JIS SJIS
     package sun.nio.cs.ext
     type    dbcs
@@ -609,8 +606,6 @@ charset Shift_JIS SJIS
     alias   x-sjis
     alias   csShiftJIS
 
-# The definition of this charset may be overridden by the init method,
-# below, if the sun.nio.cs.map property is defined.
 charset windows-31j MS932
     package sun.nio.cs.ext
     type    dbcs

make/data/charsetmapping/stdcs-linux

@@ -25,4 +25,4 @@ JIS_X_0212
 JIS_X_0208_Solaris
 JIS_X_0212_Solaris
 MS932
-SJIS       # SJIS must go together with MS932 to support sun.nio.cs.map
+SJIS

make/data/charsetmapping/stdcs-windows

@@ -8,8 +8,8 @@ MS1256
 MS1258
 MS874
 MS932
-JIS_X_0201 # JIS_X_0201 is used by MS932 in its contains() method
-SJIS       # SJIS must go together with MS932 to support sun.nio.cs.map
+JIS_X_0201
+SJIS
 MS936
 MS949
 MS950

make/data/cldr/README

@@ -1,4 +1,4 @@
 CLDR - Unicode Common Locale Data Repository
 http://cldr.unicode.org
 
-CLDR version installed: 35.1
+CLDR version installed: 36

make/data/cldr/common/bcp47/timezone.xml

@@ -7,7 +7,7 @@ For terms of use, see http://www.unicode.org/copyright.html
 -->
 
 <ldmlBCP47>
-    <version number="$Revision: 14742 $"/>
+    <version number="$Revision$"/>
     <keyword>
         <key name="tz" description="Time zone key" alias="timezone">
             <type name="adalv" description="Andorra" alias="Europe/Andorra"/>

make/data/cldr/common/dtd/ldml.dtd

@@ -6,7 +6,7 @@ Permission is hereby granted, free of charge, to any person obtaining a copy of
 THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
 
 Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.
-$Revision: 14983 $
+$Revision$
 -->
 
 <!ELEMENT ldml ( identity, ( alias | ( fallback*, localeDisplayNames?, layout?, contextTransforms?, characters?, delimiters?, measurement?, dates?, numbers?, units?, listPatterns?, collations?, posix?, characterLabels?, segmentations?, rbnf?, typographicNames?, annotations?, metadata?, references?, special* ) ) ) >
@@ -46,7 +46,7 @@ $Revision: 14983 $
 <!ATTLIST version number CDATA #REQUIRED >
     <!--@MATCH:regex/\$Revision.*\$-->
     <!--@METADATA-->
-<!ATTLIST version cldrVersion CDATA #FIXED "35.1" >
+<!ATTLIST version cldrVersion CDATA #FIXED "36" >
     <!--@MATCH:any-->
     <!--@VALUE-->
 <!ATTLIST version draft (approved | contributed | provisional | unconfirmed | true | false) #IMPLIED >
@@ -2543,7 +2543,7 @@ $Revision: 14983 $
 
 <!ELEMENT compoundUnit ( alias | ( compoundUnitPattern*, special* ) ) >
 <!ATTLIST compoundUnit type NMTOKEN #REQUIRED >
-    <!--@MATCH:literal/per-->
+    <!--@MATCH:literal/per, times-->
 <!ATTLIST compoundUnit alt NMTOKENS #IMPLIED >
     <!--@MATCH:literal/variant-->
 <!ATTLIST compoundUnit draft (approved | contributed | provisional | unconfirmed) #IMPLIED >

make/data/cldr/common/dtd/ldmlBCP47.dtd

@@ -6,7 +6,7 @@ Permission is hereby granted, free of charge, to any person obtaining a copy of
 THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
 
 Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.
-$Revision: 14983 $
+$Revision$
 -->
 
 <!ELEMENT ldmlBCP47 ( version, generation?, cldrVersion?, keyword*, attribute* ) >
@@ -16,7 +16,7 @@ $Revision: 14983 $
 <!ATTLIST version number CDATA #REQUIRED >
 	<!--@MATCH:regex/\$Revision.*\$-->
     <!--@METADATA-->
-<!ATTLIST version cldrVersion CDATA #FIXED "35.1" >
+<!ATTLIST version cldrVersion CDATA #FIXED "36" >
 	<!--@MATCH:version-->
     <!--@VALUE-->
 

make/data/cldr/common/dtd/ldmlSupplemental.dtd

@@ -7,7 +7,7 @@ THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 
 Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.
 
-    $Revision: 14983 $
+    $Revision$
 -->
 
 <!ELEMENT supplementalData ( version, generation?, cldrVersion?, currencyData?, territoryContainment?, subdivisionContainment?, languageData?, territoryInfo?, postalCodeData?, calendarData?, calendarPreferenceData?, weekData?, timeData?, measurementData?, unitPreferenceData?, timezoneData?, characters?, transforms?, metadata?, codeMappings?, parentLocales?, likelySubtags?, metazoneInfo?, plurals?, telephoneCodeData?, numberingSystems?, bcp47KeywordMappings?, gender?, references?, languageMatching?, dayPeriodRuleSet*, metaZones?, primaryZones?, windowsZones?, coverageLevels?, idValidity?, rgScope?, languageGroups? ) >
@@ -17,7 +17,7 @@ Except as contained in this notice, the name of a copyright holder shall not be
 <!ATTLIST version number CDATA #REQUIRED >
 	<!--@MATCH:any-->
     <!--@METADATA-->
-<!ATTLIST version cldrVersion CDATA #FIXED "35.1" >
+<!ATTLIST version cldrVersion CDATA #FIXED "36" >
 	<!--@MATCH:version-->
     <!--@VALUE-->
 <!ATTLIST version unicodeVersion CDATA #FIXED "12.1.0" >

make/data/cldr/common/main/af_NA.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14822 $"/>
+		<version number="$Revision$"/>
 		<language type="af"/>
 		<territory type="NA"/>
 	</identity>

make/data/cldr/common/main/af_ZA.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="af"/>
 		<territory type="ZA"/>
 	</identity>

make/data/cldr/common/main/agq.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14782 $"/>
+		<version number="$Revision$"/>
 		<language type="agq"/>
 	</identity>
 	<localeDisplayNames>
@@ -184,7 +184,6 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 			<territory type="MD">Mòodovà</territory>
 			<territory type="MG">Màdàgasɨkà</territory>
 			<territory type="MH">Chwɨlà fɨ Mashà</territory>
-			<territory type="MK">Mɨ̀sɨ̀donyìa</territory>
 			<territory type="ML">Malè</territory>
 			<territory type="MM">Mǐanmà</territory>
 			<territory type="MN">Mùŋgolìa</territory>
@@ -289,7 +288,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 		<exemplarCharacters>[a à â ǎ ā b c d e è ê ě ē ɛ {ɛ\u0300} {ɛ\u0302} {ɛ\u030C} {ɛ\u0304} f g h i ì î ǐ ī ɨ {ɨ\u0300} {ɨ\u0302} {ɨ\u030C} {ɨ\u0304} k l m n ŋ o ò ô ǒ ō ɔ {ɔ\u0300} {ɔ\u0302} {ɔ\u030C} {ɔ\u0304} p s t u ù û ǔ ū ʉ {ʉ\u0300} {ʉ\u0302} {ʉ\u030C} {ʉ\u0304} v w y z ʔ]</exemplarCharacters>
 		<exemplarCharacters type="auxiliary">[q r x]</exemplarCharacters>
 		<exemplarCharacters type="index">[A B C D E Ɛ F G H I Ɨ K L M N Ŋ O Ɔ P S T U Ʉ V W Y Z ʔ]</exemplarCharacters>
-		<exemplarCharacters type="numbers">[  \- , % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
+		<exemplarCharacters type="numbers">[  \- ‑ , % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
 	</characters>
 	<delimiters>
 		<quotationStart>„</quotationStart>

make/data/cldr/common/main/agq_CM.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14782 $"/>
+		<version number="$Revision$"/>
 		<language type="agq"/>
 		<territory type="CM"/>
 	</identity>

make/data/cldr/common/main/ak.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14782 $"/>
+		<version number="$Revision$"/>
 		<language type="ak"/>
 	</identity>
 	<localeDisplayNames>
@@ -183,7 +183,6 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 			<territory type="MD">Mɔldova</territory>
 			<territory type="MG">Madagaska</territory>
 			<territory type="MH">Marshall Islands</territory>
-			<territory type="MK">Masedonia</territory>
 			<territory type="ML">Mali</territory>
 			<territory type="MM">Miyanma</territory>
 			<territory type="MN">Mɔngolia</territory>
@@ -288,7 +287,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 		<exemplarCharacters>[a b d e ɛ f g h i k l m n o ɔ p r s t u w y]</exemplarCharacters>
 		<exemplarCharacters type="auxiliary">[c j q v z]</exemplarCharacters>
 		<exemplarCharacters type="index">[A B C D E Ɛ F G H I J K L M N O Ɔ P Q R S T U V W X Y Z]</exemplarCharacters>
-		<exemplarCharacters type="numbers">[\- , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
+		<exemplarCharacters type="numbers">[\- ‑ , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
 	</characters>
 	<delimiters>
 		<quotationStart>“</quotationStart>

make/data/cldr/common/main/ak_GH.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14782 $"/>
+		<version number="$Revision$"/>
 		<language type="ak"/>
 		<territory type="GH"/>
 	</identity>

make/data/cldr/common/main/am_ET.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="am"/>
 		<territory type="ET"/>
 	</identity>

make/data/cldr/common/main/ar_001.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="001"/>
 	</identity>

make/data/cldr/common/main/ar_AE.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="AE"/>
 	</identity>
@@ -40,14 +40,6 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 	</dates>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 		<currencies>
 			<currency type="BND">
 				<symbol alt="narrow" draft="contributed">$</symbol>

make/data/cldr/common/main/ar_BH.xml

@@ -7,19 +7,11 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="BH"/>
 	</identity>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 	</numbers>
 </ldml>

make/data/cldr/common/main/ar_DJ.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="DJ"/>
 	</identity>

make/data/cldr/common/main/ar_DZ.xml

@@ -7,12 +7,12 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14786 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="DZ"/>
 	</identity>
 	<characters>
-		<exemplarCharacters type="numbers">[\u200E \- , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
+		<exemplarCharacters type="numbers">[\u200E \- ‑ , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
 	</characters>
 	<dates>
 		<calendars>
@@ -82,10 +82,6 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 	</dates>
 	<numbers>
 		<defaultNumberingSystem>latn</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
 		<symbols numberSystem="latn">
 			<decimal>,</decimal>
 			<group>.</group>

make/data/cldr/common/main/ar_EG.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="EG"/>
 	</identity>
@@ -18,13 +18,5 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 	</localeDisplayNames>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 	</numbers>
 </ldml>

make/data/cldr/common/main/ar_EH.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="EH"/>
 	</identity>

make/data/cldr/common/main/ar_ER.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="ER"/>
 	</identity>

make/data/cldr/common/main/ar_IL.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="IL"/>
 	</identity>

make/data/cldr/common/main/ar_IQ.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="IQ"/>
 	</identity>
@@ -109,13 +109,5 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 	</dates>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 	</numbers>
 </ldml>

make/data/cldr/common/main/ar_JO.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="JO"/>
 	</identity>
@@ -109,13 +109,5 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 	</dates>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 	</numbers>
 </ldml>

make/data/cldr/common/main/ar_KM.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="KM"/>
 	</identity>

make/data/cldr/common/main/ar_KW.xml

@@ -7,19 +7,11 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14936 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="KW"/>
 	</identity>
 	<numbers>
 		<defaultNumberingSystem>arab</defaultNumberingSystem>
-		<symbols numberSystem="arab">
-			<decimal draft="contributed">٫</decimal>
-			<group draft="contributed">٬</group>
-		</symbols>
-		<symbols numberSystem="latn">
-			<decimal draft="contributed">.</decimal>
-			<group draft="contributed">,</group>
-		</symbols>
 	</numbers>
 </ldml>

make/data/cldr/common/main/ar_LB.xml

@@ -7,12 +7,12 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="LB"/>
 	</identity>
 	<characters>
-		<exemplarCharacters type="numbers">[\u200E \- , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
+		<exemplarCharacters type="numbers">[\u200E \- ‑ , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
 	</characters>
 	<dates>
 		<calendars>

make/data/cldr/common/main/ar_LY.xml

@@ -7,7 +7,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 -->
 <ldml>
 	<identity>
-		<version number="$Revision: 14769 $"/>
+		<version number="$Revision$"/>
 		<language type="ar"/>
 		<territory type="LY"/>
 	</identity>
@@ -30,7 +30,7 @@ CLDR data files are interpreted according to the LDML specification (http://unic
 		</territories>
 	</localeDisplayNames>
 	<characters>
-		<exemplarCharacters type="numbers">[\u200E \- , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
+		<exemplarCharacters type="numbers">[\u200E \- ‑ , . % ‰ + 0 1 2 3 4 5 6 7 8 9]</exemplarCharacters>
 	</characters>
 	<dates>
 		<calendars>